#include "ch395inc.h" #include "ch395cmd.h" #include "ch395.h" /** * @brief 复位ch395芯片 * @param 无 * @retval 无 */ void ch395_cmd_reset(void) { ch395_write_cmd(CMD00_RESET_ALL); ch395_scs_hign; } /** * @brief 使ch395进入睡眠状态 * @param 无 * @retval 无 */ void ch395_cmd_sleep(void) { ch395_write_cmd(CMD00_ENTER_SLEEP); ch395_scs_hign; } /** * @brief 获取芯片以及固件版本号，1字节，高四位表示芯片版本， * @param 无 * @retval 1字节芯片及固件版本号 */ uint8_t ch395_cmd_get_ver(void) { uint8_t i; ch395_write_cmd(CMD01_GET_IC_VER); i = ch395_read_data(); ch395_scs_hign; return i; } /** * @brief 测试命令，用于测试硬件以及接口通讯， * @param 1字节测试数据 * @retval 硬件ok，返回 testdata按位取反 */ uint8_t ch395_cmd_check_exist(uint8_t testdata) { uint8_t i; ch395_write_cmd(CMD11_CHECK_EXIST); ch395_write_data(testdata); i = ch395_read_data(); ch395_scs_hign; return i; } /** * @brief 设置phy，主要设置ch395 phy为100/10m 或者全双工半双工，ch395默为自动协商。 * @param 参考phy 命令参数/状态 * @retval 无 */ void ch395_cmd_set_phy(uint8_t phystat) { ch395_write_cmd(CMD10_SET_PHY); ch395_write_data(phystat); ch395_scs_hign; } /** * @brief 获取phy的状态 * @param 无 * @retval 当前ch395phy状态，参考phy参数/状态定义 */ uint8_t ch395_cmd_get_phy_status(void) { uint8_t i; ch395_write_cmd(CMD01_GET_PHY_STATUS); i = ch395_read_data(); ch395_scs_hign; return i; } /** * @brief 获取全局中断状态，收到此命令ch395自动取消中断，0x43及以下版本使用 * @param 无 * @retval 返回当前的全局中断状态 */ uint8_t ch395_cmd_get_glob_int_status(void) { uint8_t init_status; ch395_write_cmd(CMD01_GET_GLOB_INT_STATUS); init_status = ch395_read_data(); ch395_scs_hign; return init_status; } /** * @brief 初始化ch395芯片 * @param 无 * @retval 返回执行结果 */ uint8_t ch395_cmd_init(void) { uint8_t i = 0; uint8_t s = 0; ch395_write_cmd(CMD0W_INIT_CH395); ch395_scs_hign; while (1) { HAL_Delay(10); /* 延时查询，建议2MS以上 */ s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if (s != CH395_ERR_BUSY) { break; /* 如果CH395芯片返回忙状态 */ } if (i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出,本函数需要500MS以上执行完毕 */ } } return s; } /** * @brief 设置ch395串口波特率，仅在串口模式下有效 * @param baudrate 串口波特率 * @retval 无 */ void ch395_cmd_set_uart_baud_rate(uint32_t baudrate) { ch395_write_cmd(CMD31_SET_BAUDRATE); ch395_write_data((uint8_t)baudrate); ch395_write_data((uint8_t)((uint16_t)baudrate >> 8)); ch395_write_data((uint8_t)(baudrate >> 16)); uint8_t i = ch395_read_data(); ch395_scs_hign; } /** * @brief 获取命令执行状态，某些命令需要等待命令执行结果 * @param 无 * @retval 返回上一条命令执行状态 */ uint8_t ch395_get_cmd_status(void) { uint8_t i; ch395_write_cmd(CMD01_GET_CMD_STATUS); i = ch395_read_data(); ch395_scs_hign; return i; } /** * @brief 设置ch395的ip地址 * @param ipaddr 指ip地址 * @retval 无 */ void ch395_cmd_set_ipaddr(uint8_t *ipaddr) { uint8_t i; ch395_write_cmd(CMD40_SET_IP_ADDR); for (i = 0; i < 4; i++) { ch395_write_data(*ipaddr++); } ch395_scs_hign; } /** * @brief 设置ch395的网关ip地址 * @param ipaddr 指向网关ip地址 * @retval 无 */ void ch395_cmd_set_gw_ipaddr(uint8_t *gwipaddr) { uint8_t i; ch395_write_cmd(CMD40_SET_GWIP_ADDR); for (i = 0; i < 4; i++) { ch395_write_data(*gwipaddr++); } ch395_scs_hign; } /** * @brief 设置ch395的子网掩码，默认为255.255.255.0 * @param maskaddr 指子网掩码地址 * @retval 无 */ void ch395_cmd_set_maskaddr(uint8_t *maskaddr) { uint8_t i; ch395_write_cmd(CMD40_SET_MASK_ADDR); for (i = 0; i < 4; i++) { ch395_write_data(*maskaddr++); } ch395_scs_hign; } /** * @brief 设置ch395的mac地址。 * @param mcaddr mac地址指针 * @retval 无 */ void ch395_cmd_set_macaddr(uint8_t *amcaddr) { uint8_t i; ch395_write_cmd(CMD60_SET_MAC_ADDR); for (i = 0; i < 6; i++) { ch395_write_data(*amcaddr++); } ch395_scs_hign; HAL_Delay(100); } /** * @brief 获取ch395的mac地址。 * @param amcaddr mac地址指针 * @retval 无 */ void ch395_cmd_get_macaddr(uint8_t *amcaddr) { uint8_t i; ch395_write_cmd(CMD06_GET_MAC_ADDR); for (i = 0; i < 6; i++) { *amcaddr++ = ch395_read_data(); } ch395_scs_hign; } /** * @brief 设置mac过滤。 * @param filtype 参考 mac过滤 * @param table0 hash0 * @param table1 hash1 * @retval 无 */ void ch395_cmd_set_macfilt(uint8_t filtype, uint32_t table0, uint32_t table1) { ch395_write_cmd(CMD90_SET_MAC_FILT); ch395_write_data(filtype); ch395_write_data((uint8_t)table0); ch395_write_data((uint8_t)((uint16_t)table0 >> 8)); ch395_write_data((uint8_t)(table0 >> 16)); ch395_write_data((uint8_t)(table0 >> 24)); ch395_write_data((uint8_t)table1); ch395_write_data((uint8_t)((uint16_t)table1 >> 8)); ch395_write_data((uint8_t)(table1 >> 16)); ch395_write_data((uint8_t)(table1 >> 24)); ch395_scs_hign; } /** * @brief 获取不可达信息 (ip,port,protocol type) * @param list 保存获取到的不可达 @arg 第1个字节为不可达代码，请参考 不可达代码(ch395inc.h) @arg 第2个字节为ip包协议类型 @arg 第3-4字节为端口号 @arg 第4-8字节为ip地址 * @retval 无 */ void ch395_cmd_get_unreachippt(uint8_t *list) { uint8_t i; ch395_write_cmd(CMD08_GET_UNREACH_IPPORT); for (i = 0; i < 8; i++) { *list++ = ch395_read_data(); } ch395_scs_hign; } /** * @brief 获取远端的ip和端口地址，一般在tcp server模式下使用 * @param sockindex socket索引 * @param list 保存ip和端口 * @retval 无 */ void ch395_cmd_get_remoteipp(uint8_t sockindex, uint8_t *list) { uint8_t i; ch395_write_cmd(CMD06_GET_REMOT_IPP_SN); ch395_write_data(sockindex); for (i = 0; i < 6; i++) { *list++ = ch395_read_data(); } ch395_scs_hign; } /** * @brief 设置socket n的目的ip地址 * @param sockindex socket索引 * @param ipaddr 指向ip地址 * @retval 无 */ void ch395_set_socket_desip(uint8_t sockindex, uint8_t *ipaddr) { ch395_write_cmd(CMD50_SET_IP_ADDR_SN); ch395_write_data(sockindex); ch395_write_data(*ipaddr++); ch395_write_data(*ipaddr++); ch395_write_data(*ipaddr++); ch395_write_data(*ipaddr++); ch395_scs_hign; } /** * @brief 设置socket 的协议类型 * @param sockindex socket索引,prottype 协议类型 * @param 请参考 socket协议类型定义(ch395inc.h) * @retval 无 */ void ch395_set_socket_prot_type(uint8_t sockindex, uint8_t prottype) { ch395_write_cmd(CMD20_SET_PROTO_TYPE_SN); ch395_write_data(sockindex); ch395_write_data(prottype); ch395_scs_hign; } /** * @brief 设置socket n的协议类型 * @param sockindex socket索引 * @param desprot 2字节目的端口 * @retval 无 */ void ch395_set_socket_desport(uint8_t sockindex, uint16_t desprot) { ch395_write_cmd(CMD30_SET_DES_PORT_SN); ch395_write_data(sockindex); ch395_write_data((uint8_t)desprot); ch395_write_data((uint8_t)(desprot >> 8)); ch395_scs_hign; } /** * @brief 设置socket n的协议类型 * @param sockindex socket索引 * @param desprot 2字节源端口 * @retval 无 */ void ch395_set_socket_sourport(uint8_t sockindex, uint16_t surprot) { ch395_write_cmd(CMD30_SET_SOUR_PORT_SN); ch395_write_data(sockindex); ch395_write_data((uint8_t)surprot); ch395_write_data((uint8_t)(surprot >> 8)); ch395_scs_hign; } /** * @brief ip模式下，socket ip包协议字段 * @param sockindex socket索引 * @param prototype ipraw模式1字节协议字段 * @retval 无 */ void ch395_set_socket_ipraw_proto(uint8_t sockindex, uint8_t prototype) { ch395_write_cmd(CMD20_SET_IPRAW_PRO_SN); ch395_write_data(sockindex); ch395_write_data(prototype); ch395_scs_hign; } /** * @brief 开启/关闭 ping * @param senable :0 / 1, 具体含义如下: * @arg 1: 开启ping * @arg 0: 关闭ping * @retval 无 */ void ch395_enable_ping(uint8_t enable) { ch395_write_cmd(CMD01_PING_ENABLE); ch395_write_data(enable); ch395_scs_hign; } /** * @brief 向发送缓冲区写数据 * @param sockindex socket索引 * @param databuf 数据缓冲区 * @param len 长度 * @retval 无 */ void ch395_send_data(uint8_t sockindex, uint8_t *databuf, uint16_t len) { uint16_t i; ch395_write_cmd(CMD30_WRITE_SEND_BUF_SN); ch395_write_data((uint8_t)sockindex); ch395_write_data((uint8_t)len); ch395_write_data((uint8_t)(len >> 8)); for (i = 0; i < len; i++) { ch395_write_data(*databuf++); } ch395_scs_hign; } /** * @brief 获取接收缓冲区长度 * @param sockindex socket索引 * @retval 返回接收缓冲区有效长度 */ uint16_t ch395_get_recv_length(uint8_t sockindex) { uint16_t i; ch395_write_cmd(CMD12_GET_RECV_LEN_SN); ch395_write_data((uint8_t)sockindex); i = ch395_read_data(); i = (uint16_t)(ch395_read_data() << 8) + i; ch395_scs_hign; return i; } /** * @brief 清除接收缓冲区 * @param sockindex socket索引 * @retval 无 */ void ch395_clear_recv_buf(uint8_t sockindex) { ch395_write_cmd(CMD10_CLEAR_RECV_BUF_SN); ch395_write_data((uint8_t)sockindex); ch395_scs_hign; } /** * @brief 读取接收缓冲区数据 * @param sockindex socket索引 * @param len 长度 * @param pbuf 缓冲区 * @retval 无 */ void ch395_get_recv_data(uint8_t sockindex, uint16_t len, uint8_t *pbuf) { uint16_t i; if (!len)return; ch395_write_cmd(CMD30_READ_RECV_BUF_SN); ch395_write_data(sockindex); ch395_write_data((uint8_t)len); ch395_write_data((uint8_t)(len >> 8)); delay_us(1); for (i = 0; i < len; i++) { *pbuf = ch395_read_data(); pbuf++; } ch395_scs_hign; } /** * @brief 设置重试次数 * @param count 重试值，最大为20次 * @retval 无 */ void ch395_cmd_set_retry_count(uint8_t count) { ch395_write_cmd(CMD10_SET_RETRAN_COUNT); ch395_write_data(count); ch395_scs_hign; } /** * @brief 设置重试周期 * @param period 重试周期单位为毫秒，最大1000ms * @retval 无 */ void ch395_cmd_set_retry_period(uint16_t period) { ch395_write_cmd(CMD10_SET_RETRAN_COUNT); ch395_write_data((uint8_t)period); ch395_write_data((uint8_t)(period >> 8)); ch395_scs_hign; } /** * @brief 获取socket * @param sockindex socket索引 * @retval socket n的状态信息，第1字节为socket 打开或者关闭,第2字节为tcp状态 */ void ch395_cmd_get_socket_status(uint8_t sockindex, uint8_t *status) { ch395_write_cmd(CMD12_GET_SOCKET_STATUS_SN); ch395_write_data(sockindex); *status++ = ch395_read_data(); *status++ = ch395_read_data(); ch395_scs_hign; } /** * @brief 打开socket，此命令需要等待执行成功 * @param sockindex socket索引 * @retval 返回执行结果 */ uint8_t ch395_open_socket(uint8_t sockindex) { uint8_t i = 0; uint8_t s = 0; ch395_write_cmd(CMD1W_OPEN_SOCKET_SN); ch395_write_data(sockindex); ch395_scs_hign; while (1) { delay_us(3000); //HAL_Delay(5); /* 延时查询，建议2MS以上 */ s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if (s != CH395_ERR_BUSY) { break; /* 如果CH395芯片返回忙状态 */ } if (i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出 */ } } return s; } /** * @brief 关闭socket， * @param sockindex socket索引 * @retval 返回执行结果 */ uint8_t ch395_close_socket(uint8_t sockindex) { uint8_t i = 0; uint8_t s = 0; ch395_write_cmd(CMD1W_CLOSE_SOCKET_SN); ch395_write_data(sockindex); ch395_scs_hign; while (1) { delay_us(3000); //HAL_Delay(5); /* 延时查询，建议2MS以上 */ s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if (s != CH395_ERR_BUSY) { break; /* 如果CH395芯片返回忙状态 */ } if (i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出 */ } } return s; } /** * @brief tcp连接，仅在tcp模式下有效，此命令需要等待执行成功 * @param sockindex socket索引 * @retval 返回执行结果 */ uint8_t ch395_tcp_connect(uint8_t sockindex) { uint8_t i = 0; uint8_t s = 0; ch395_write_cmd(CMD1W_TCP_CONNECT_SN); ch395_write_data(sockindex); ch395_scs_hign; while (1) { HAL_Delay(5); /* 延时查询，建议2MS以上 */ s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if (s != CH395_ERR_BUSY) { break; /* 如果CH395芯片返回忙状态 */ } if (i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出 */ } } return s; } /** * @brief tcp监听，仅在tcp模式下有效，此命令需要等待执行成功 * @param sockindex socket索引 * @retval 返回执行结果 */ uint8_t ch395_tcp_listen(uint8_t sockindex) { uint8_t i = 0; uint8_t s = 0; ch395_write_cmd(CMD1W_TCP_LISTEN_SN); ch395_write_data(sockindex); ch395_scs_hign; while (1) { delay_us(3000); //HAL_Delay(5); /* 延时查询，建议2MS以上 */ s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if (s != CH395_ERR_BUSY) { break; /* 如果CH395芯片返回忙状态 */ } if (i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出 */ } } return s; } /** * @brief tcp断开，仅在tcp模式下有效，此命令需要等待执行成功 * @param sockindex socket索引 * @retval 无 */ uint8_t ch395_tcp_disconnect(uint8_t sockindex) { uint8_t i = 0; uint8_t s = 0; ch395_write_cmd(CMD1W_TCP_DISNCONNECT_SN); ch395_write_data(sockindex); ch395_scs_hign; while (1) { HAL_Delay(5); /* 延时查询，建议2MS以上 */ s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if (s != CH395_ERR_BUSY) { break; /* 如果CH395芯片返回忙状态 */ } if (i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出 */ } } return s; } /** * @brief 获取socket n的中断状态 * @param sockindex socket索引 * @retval 中断状态 */ uint8_t ch395_get_socket_int(uint8_t sockindex) { uint8_t intstatus; ch395_write_cmd(CMD11_GET_INT_STATUS_SN); ch395_write_data(sockindex); delay_us(2); intstatus = ch395_read_data(); ch395_scs_hign; return intstatus; } /** * @brief 对多播地址进行crc运算，并取高6位。 * @param mac_addr mac地址 * @retval 返回crc32的高6位 */ uint8_t ch395_crcret_6bit(uint8_t *mac_addr) { signed long perbyte; signed long perbit; const uint32_t poly = 0x04c11db7; uint32_t crc_value = 0xffffffff; uint8_t c; for(perbyte = 0; perbyte < 6; perbyte ++ ) { c = *(mac_addr++); for ( perbit = 0; perbit < 8; perbit++ ) { crc_value = (crc_value << 1) ^ ((((crc_value >> 31)^c) & 0x01) ? poly : 0); c >>= 1; } } crc_value = crc_value >> 26; return ((uint8_t)crc_value); } /** * @brief 启动/停止dhcp * @param flag:0 / 1, 具体含义如下: * @arg 1:启动dhcp * @arg 0：停止dhcp * @retval 执行状态 */ uint8_t ch395_dhcp_enable(uint8_t flag) { uint8_t i = 0; uint8_t s; ch395_write_cmd(CMD10_DHCP_ENABLE); ch395_write_data(flag); ch395_scs_hign; while (1) { HAL_Delay(20); s = ch395_get_cmd_status(); /* 不能过于频繁查询 */ if(s != CH395_ERR_BUSY) { break; /* 如果ch395芯片返回忙状态 */ } if(i++ > 200) { return CH395_ERR_UNKNOW; /* 超时退出 */ } } return s; } /** * @brief 获取dhcp状态 * @param 无 * @retval dhcp状态，0为成功，其他值表示错误 */ uint8_t ch395_get_dhcp_status(void) { uint8_t status; ch395_write_cmd(CMD01_GET_DHCP_STATUS); status = ch395_read_data(); ch395_scs_hign; return status; } /** * @brief 获取ip，子网掩码和网关地址 * @param sockindex socket索引 * @retval 12个字节的ip,子网掩码和网关地址 */ void ch395_get_ipinf(uint8_t *addr) { uint8_t i; ch395_write_cmd(CMD014_GET_IP_INF); for(i = 0; i < 20; i++) { *addr++ = ch395_read_data(); } ch395_scs_hign; } /** * @brief 写gpio寄存器 * @param regadd 寄存器地址 * @param regval 寄存器值 * @retval 无 */ void ch395_write_gpio_addr(uint8_t regadd, uint8_t regval) { ch395_write_cmd(CMD20_WRITE_GPIO_REG); ch395_write_data(regadd); ch395_write_data(regval); } /** * @brief 读gpio寄存器 * @param regadd 寄存器地址 * @retval 寄存器的值 */ uint8_t ch395_read_gpio_addr(uint8_t regadd) { uint8_t i; ch395_write_cmd(CMD10_READ_GPIO_REG); ch395_write_data(regadd); HAL_Delay(1); i = ch395_read_data(); return i; } /** * @brief 擦除eeprom * @param 无 * @retval 执行状态 */ uint8_t ch395_eeprom_erase(void) { uint8_t i; ch395_write_cmd(CMD00_EEPROM_ERASE); while (1) { HAL_Delay(20); i = ch395_get_cmd_status(); if (i == CH395_ERR_BUSY) { continue; } break; } return i; } /** * @brief 写eeprom * @param eepaddr eeprom地址 * @param buf 缓冲区地址 * @param len 长度 * @retval 无 */ uint8_t ch395_eeprom_write(uint16_t eepaddr, uint8_t *buf, uint8_t len) { uint8_t i; ch395_write_cmd(CMD30_EEPROM_WRITE); ch395_write_data((uint8_t)(eepaddr)); ch395_write_data((uint8_t)(eepaddr >> 8)); ch395_write_data(len); while (len--)ch395_write_data(*buf++); while (1) { delay_ms(20); i = ch395_get_cmd_status(); if (i == CH395_ERR_BUSY) { continue; } break; } return i; } /** * @brief 写eeprom * @param eepaddr eeprom地址 * @param buf 缓冲区地址 * @param len 长度 * @retval 无 */ void ch395_eeprom_read(uint16_t eepaddr, uint8_t *buf, uint8_t len) { ch395_write_cmd(CMD30_EEPROM_READ); ch395_write_data((uint8_t)(eepaddr)); ch395_write_data((uint8_t)(eepaddr >> 8)); ch395_write_data(len); delay_ms(1); while (len--) { *buf++ = ch395_read_data(); } } /** * @brief 设置tcp mss值 * @param tcpmss * @retval 无 */ void ch395_set_tcpmss(uint16_t tcpmss) { ch395_write_cmd(CMD20_SET_TCP_MSS); ch395_write_data((uint8_t)(tcpmss)); ch395_write_data((uint8_t)(tcpmss >> 8)); } /** * @brief 设置socket接收缓冲区 * @param sockindex socket索引,址,blknum * @param startblk 起始地 * @param 单位缓冲区个数 ，单位为512字节 * @retval 无 */ void ch395_set_socket_recv_buf(uint8_t sockindex, uint8_t startblk, uint8_t blknum) { ch395_write_cmd(CMD30_SET_RECV_BUF); ch395_write_data(sockindex); ch395_write_data(startblk); ch395_write_data(blknum); } /** * @brief 设置socket发送缓冲区 * @param sockindex socket索引 * @param startblk 起始地址 * @param blknum 单位缓冲区个数 * @retval 无 */ void ch395_set_socket_send_buf(uint8_t sockindex, uint8_t startblk, uint8_t blknum) { ch395_write_cmd(CMD30_SET_SEND_BUF); ch395_write_data(sockindex); ch395_write_data(startblk); ch395_write_data(blknum); } /** * @brief udp向指定的ip和端口发送数据 * @param buf : 发送数据缓冲区 * @param len : 发送数据长度 * @param ip : 目标ip * @param port : 目标端口 * @param sockeid : socket索引值 * @retval 无 */ void ch395_udp_send_data(uint8_t *buf, uint32_t len, uint8_t *ip, uint16_t port, uint8_t sockindex) { ch395_set_socket_desip(sockindex, ip); /* 设置socket 0目标IP地址 */ ch395_set_socket_desport(sockindex, port); ch395_send_data(sockindex, buf, len); } /** * @brief 设置ch395启动参数 * @param mdata 设置的参数 * @retval 无 */ void ch395_set_start_para(uint32_t mdata) { ch395_write_cmd(CMD40_SET_FUN_PARA); ch395_write_data((uint8_t)mdata); ch395_write_data((uint8_t)((uint16_t)mdata >> 8)); ch395_write_data((uint8_t)(mdata >> 16)); ch395_write_data((uint8_t)(mdata >> 24)); } /** * @brief 获取全局中断状态，收到此命令ch395自动取消中断,0x44及以上版本使用 * @param 无 * @retval 返回当前的全局中断状态 */ uint16_t ch395_cmd_get_glob_int_status_all(void) { uint16_t init_status; ch395_write_cmd(CMD02_GET_GLOB_INT_STATUS_ALL); delay_us(2); init_status = ch395_read_data(); init_status = (uint16_t)(ch395_read_data() << 8) + init_status; ch395_scs_hign; return init_status; } /** * @brief 设置keepalive功能 * @param sockindex socket号 * @param cmd 0：关闭 1：开启 * @retval 无 */ void ch395_set_keeplive(uint8_t sockindex, uint8_t cmd) { ch395_write_cmd(CMD20_SET_KEEP_LIVE_SN); ch395_write_data(sockindex); ch395_write_data(cmd); } /** * @brief 设置keepalive重试次数 * @param cnt 重试次数（） * @retval 无 */ void ch395_keeplive_cnt(uint8_t cnt) { ch395_write_cmd(CMD10_SET_KEEP_LIVE_CNT); ch395_write_data(cnt); } /** * @brief 设置keeplive空闲 * @param idle 空闲时间（单位：ms） * @retval 无 */ void ch395_keeplive_idle(uint32_t idle) { ch395_write_cmd(CMD40_SET_KEEP_LIVE_IDLE); ch395_write_data((uint8_t)idle); ch395_write_data((uint8_t)((uint16_t)idle >> 8)); ch395_write_data((uint8_t)(idle >> 16)); ch395_write_data((uint8_t)(idle >> 24)); } /** * @brief 设置keeplive间隔时间 * @param intvl 间隔时间（单位：ms） * @retval 无 */ void ch395_keeplive_intvl(uint32_t intvl) { ch395_write_cmd(CMD40_SET_KEEP_LIVE_INTVL); ch395_write_data((uint8_t)intvl); ch395_write_data((uint8_t)((uint16_t)intvl >> 8)); ch395_write_data((uint8_t)(intvl >> 16)); ch395_write_data((uint8_t)(intvl >> 24)); } /** * @brief 设置ttl * @param ssockindex socket号 * @param ttlnum:ttl数 * @retval 无 */ void ch395_setttl_num(uint8_t sockindex, uint8_t ttlnum) { ch395_write_cmd(CMD20_SET_TTL); ch395_write_data(sockindex); ch395_write_data(ttlnum); }