wxsmart-test
/
acdt
7
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
acdt/Core/Src/gpio.c

168 lines
6.4 KiB
C
Raw Blame History

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file gpio.c
* @brief This file provides code for the configuration
* of all used GPIO pins.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "gpio.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/*----------------------------------------------------------------------------*/
/* Configure GPIO */
/*----------------------------------------------------------------------------*/
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/** Configure pins as
* Analog
* Input
* Output
* EVENT_OUT
* EXTI
*/
void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOE, DO1_Pin|DO2_Pin|DO3_Pin|DO4_Pin
|DO5_Pin|CH395Q_TX_CTRL_Pin|ADS1256_SCK_Pin|GPIO_LED_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, DO6_Pin|DO7_Pin|DO8_Pin|DS18B20_IO_Pin
|HC595_RCLK_Pin|SENSOR_SELECT_Pin|AO_BLF_SCK_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, HC595_SER_Pin|MS5803_SCK_Pin|MS5803_MOSI_Pin|AO_BLF_MOSI_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, MS5803_NSS8_Pin|AO_BLF_NSS2_Pin|AO_BLF_NSS1_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, MS5803_NSS7_Pin|MS5803_NSS6_Pin|ADS1256_NSS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOE, MS5803_NSS5_Pin|MS5803_NSS4_Pin|MS5803_NSS3_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOD, CH395Q_RSTI_Pin|HC595_SRCLK_Pin|ADS1220_SCK_Pin|ADS1220_MOSI_Pin
|AO_DWQ_MOSI_Pin|AO_DWQ_SCK_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOD, MS5803_NSS2_Pin|MS5803_NSS1_Pin|HC165_CLK_Pin|HC165_LD_Pin
|ADS1220_NSS_Pin|AO_DWQ_NSS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, ADS1256_PDWN_Pin|ADS1256_MOSI_Pin, GPIO_PIN_RESET);
/*Configure GPIO pins : PEPin PEPin PEPin PEPin
PEPin PEPin PEPin PEPin
PEPin PEPin PEPin */
GPIO_InitStruct.Pin = DO1_Pin|DO2_Pin|DO3_Pin|DO4_Pin
|DO5_Pin|MS5803_NSS5_Pin|CH395Q_TX_CTRL_Pin|MS5803_NSS4_Pin
|MS5803_NSS3_Pin|ADS1256_SCK_Pin|GPIO_LED_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/*Configure GPIO pins : PCPin PCPin PCPin PCPin
PCPin PCPin PCPin PCPin
PCPin PCPin */
GPIO_InitStruct.Pin = DO6_Pin|DO7_Pin|DO8_Pin|DS18B20_IO_Pin
|MS5803_NSS8_Pin|HC595_RCLK_Pin|SENSOR_SELECT_Pin|AO_BLF_SCK_Pin
|AO_BLF_NSS2_Pin|AO_BLF_NSS1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/*Configure GPIO pins : PAPin PAPin PAPin PAPin */
GPIO_InitStruct.Pin = DI_NAMUR1_Pin|DI_NAMUR2_Pin|HC165_DAT_Pin|MS5803_MISO_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pins : PAPin PAPin PAPin PAPin */
GPIO_InitStruct.Pin = HC595_SER_Pin|MS5803_SCK_Pin|MS5803_MOSI_Pin|AO_BLF_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin PBPin PBPin
PBPin */
GPIO_InitStruct.Pin = MS5803_NSS7_Pin|MS5803_NSS6_Pin|ADS1256_PDWN_Pin|ADS1256_NSS_Pin
|ADS1256_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pin : PE13 */
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/*Configure GPIO pins : PDPin PDPin PDPin PDPin */
GPIO_InitStruct.Pin = CH395Q_INT_Pin|CH395Q_RST_Pin|ADS1220_DRDY_Pin|ADS1220_MISO_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/*Configure GPIO pins : PDPin PDPin PDPin PDPin
PDPin PDPin PDPin PDPin
PDPin PDPin PDPin PDPin */
GPIO_InitStruct.Pin = CH395Q_RSTI_Pin|MS5803_NSS2_Pin|MS5803_NSS1_Pin|HC165_CLK_Pin
|HC165_LD_Pin|HC595_SRCLK_Pin|ADS1220_SCK_Pin|ADS1220_NSS_Pin
|ADS1220_MOSI_Pin|AO_DWQ_MOSI_Pin|AO_DWQ_SCK_Pin|AO_DWQ_NSS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin */
GPIO_InitStruct.Pin = ADS1256_DRDY_Pin|ADS1256_MISO_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* EXTI interrupt init*/
HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
}
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
Reference in New Issue View Git Blame Copy Permalink