#include "cmd_queue.h"
#include <stdlib.h>
#include "atcom.h"
#include "eeprom.h"


char *pEnd;
char qrstr[50];//二维码字符串

uint8_t  cmd_buffer[CMD_MAX_SIZE];                     //指令缓存
static uint16_t current_screen_id = 0;                 //当前画面ID
uint8_t years,months,weeks,days,hours,minutes,sec;


bool refresh = true;
bool qrfresh = true;
float ao_out,addr_num;
int screen_tim_cnt = 0;

/*! 
*  \brief  消息处理流程
*  \param msg 待处理消息
*  \param size 消息长度
*/
void ProcessMessage( PCTRL_MSG msg, uint16_t size )
{
    uint8 cmd_type = msg->cmd_type;               	//指令类型
    uint8 ctrl_msg = msg->ctrl_msg;                 //消息的类型
    uint8 control_type = msg->control_type;         //控件类型
    uint16 screen_id = PTR2U16(&msg->screen_id);    //画面ID
    uint16 control_id = PTR2U16(&msg->control_id);  //控件ID
    uint32 value = PTR2U32(msg->param);             //数值

    switch(cmd_type)
    {  
		case NOTIFY_TOUCH_PRESS:                                                        //触摸屏按下
		case NOTIFY_TOUCH_RELEASE:                                                      //触摸屏松开
			NotifyTouchXY(cmd_buffer[1],PTR2U16(cmd_buffer+2),PTR2U16(cmd_buffer+4)); 
			break;                                                                    
		case NOTIFY_WRITE_FLASH_OK:                                                     //写FLASH成功
			NotifyWriteFlash(1);                                                      
			break;                                                                    
		case NOTIFY_WRITE_FLASH_FAILD:                                                  //写FLASH失败
			NotifyWriteFlash(0);                                                      
			break;                                                                    
		case NOTIFY_READ_FLASH_OK:                                                      //读取FLASH成功
			NotifyReadFlash(1,cmd_buffer+2,size-6);                                     //去除帧头帧尾
			break;                                                                    
		case NOTIFY_READ_FLASH_FAILD:                                                   //读取FLASH失败
			NotifyReadFlash(0,0,0);                                                   
			break;                                                                    
		case NOTIFY_READ_RTC:                                                           //读取RTC时间
			NotifyReadRTC(cmd_buffer[2],cmd_buffer[3],cmd_buffer[4],cmd_buffer[5],cmd_buffer[6],cmd_buffer[7],cmd_buffer[8]);
			break;
		case NOTIFY_CONTROL:
			{
				if(ctrl_msg==MSG_GET_CURRENT_SCREEN)                                    //画面ID变化通知
				{
					NotifyScreen(screen_id);                                            //画面切换调动的函数
				}
				else
				{
					switch(control_type)
					{
						case kCtrlButton:                                                   //按钮控件
							NotifyButton(screen_id,control_id,msg->param[1]);                  
							break;                                                             
						case kCtrlText:                                                     //文本控件
							NotifyText(screen_id,control_id,msg->param);                       
							break;                                                             
						case kCtrlProgress:                                                 //进度条控件
							NotifyProgress(screen_id,control_id,value);                        
							break;                                                             
						case kCtrlSlider:                                                   //滑动条控件
							NotifySlider(screen_id,control_id,value);                          
							break;                                                             
						case kCtrlMeter:                                                    //仪表控件
							NotifyMeter(screen_id,control_id,value);                           
							break;                                                             
						case kCtrlMenu:                                                     //菜单控件
							NotifyMenu(screen_id,control_id,msg->param[0],msg->param[1]);      
							break;                                                              
						case kCtrlSelector:                                                 //选择控件
							NotifySelector(screen_id,control_id,msg->param[0]);                
							break;                                                              
						case kCtrlRTC:                                                      //倒计时控件
							NotifyTimer(screen_id,control_id);
							break;
						default:
							break;
					}
				} 
				break;  
			} 
		default:
			break;
    }
}

/*! 
*  \brief  画面切换通知
*  \details  当前画面改变时(或调用GetScreen)，执行此函数
*  \param screen_id 当前画面ID
*/
void NotifyScreen(uint16_t screen_id)
{
    //TODO: 添加用户代码
    current_screen_id = screen_id;	//在工程配置中开启画面切换通知，记录当前画面ID
	refresh = true;
	qrfresh = true;
	
	if(screen_id == 2)
    {
       screen_tim_cnt = 0;//加载页面计时
    }
	
	//二维码文本准备
	sprintf(qrstr,"%d",HoldReg[37]);
	strcat(qrstr,"&");


	if(screen_id ==  5) { strcat(qrstr,"190\0");}//全行程测试开关型
	if(screen_id ==  6) { strcat(qrstr,"20\0");}//全行程测试调节型

	if(screen_id ==  7) { strcat(qrstr,"200\0");}//2小时老化开关型
	if(screen_id ==  8) { strcat(qrstr,"200\0");}//2小时老化调节型
	
	if(screen_id == 9) { strcat(qrstr,"902\0");}//综合测试开关型
	if(screen_id == 10) { strcat(qrstr,"901\0");}//综合测试调节型
	
	if(screen_id == 11) { strcat(qrstr,"40\0");}//死区测试调节型
	
	if(screen_id == 12) { strcat(qrstr,"180\0");}//气密
}

/*! 
*  \brief  触摸坐标事件响应
*  \param press 1按下触摸屏，3松开触摸屏
*  \param x x坐标
*  \param y y坐标
*/
void NotifyTouchXY(uint8_t press,uint16_t x,uint16_t y)
{ 
    //TODO: 添加用户代码
}

int pow_grade = 1;
int last_connect_state = 5;
/*! 
*  \brief  更新数据
*/ 
void UpdateUI(void)
{
	//文本设置和显示  定时50ms刷新一次
	if(current_screen_id == 0)
	{
		SetTextFloat(0,7,HoldReg[37],0,0);//设备ID
	}
	
	if(current_screen_id == 1)
	{
		if(refresh)
		{
			delay_us(10);
			SetTextValue(1,8,(uchar *)wifiname);//wifi名称
			SetTextValue(1,9,(uchar *)wifipassword);//wifi密码
			SetTextValue(1,10,(uchar *)myip);//本地IP
			SetTextValue(1,11,(uchar *)hisip);//目标IP
			SetTextValue(1,12,(uchar *)port);//端口号
			
			refresh = false;
		}
		if(!(last_connect_state == connect_state))
		{
			last_connect_state = connect_state;
			refresh = true;
			switch(last_connect_state)
			{
				case 0: SetTextValue(1,2,(uchar *)"wifi未连接"); break;
				case 1: SetTextValue(1,2,(uchar *)"wifi已连接，未获取IP"); break;
				case 2: SetTextValue(1,2,(uchar *)"wifi已连接，已获取IP"); break;
				case 3: SetTextValue(1,2,(uchar *)"wifi正在连接"); break;
				case 4: SetTextValue(1,2,(uchar *)"wifi断开"); break;
			}
		}
	}
	
    if(current_screen_id == 2)                              
    {
		
		if(screen_tim_cnt < 360)
		{
			screen_tim_cnt += 2;
			SetProgressValue(2,2,screen_tim_cnt);//环形进度条
			SetControlVisiable(2,3,0);//隐藏确认按钮
		}
		else if(screen_tim_cnt < 500)
		{
			SetProgressValue(2,2,360);//环形进度条
			screen_tim_cnt = 600;
		}
		else
		{
			SetProgressValue(2,2,360);//环形进度条
		}
		if(wifi_set_state == 0)
		{
			refresh = true;
			screen_tim_cnt = 600;
			SetControlVisiable(2,3,1);//显示确认按钮
		}			
    }
	if(current_screen_id == 3)//开关型                              
    {
		AnimationPlayFrame(3,3,(DisState[0]>>0)&0x01);//开到位
		AnimationPlayFrame(3,4,(DisState[0]>>1)&0x01);//关到位
		
		SetButtonValue(3,5,(CoilState[0]>>0)&0x01);//全开
		SetButtonValue(3,6,(CoilState[0]>>1)&0x01);//全关
		SetButtonValue(3,7,(CoilState[0]>>2)&0x01);//ESD
		
		SetTextFloat(3,13,InputReg[0]/1000.0,2,1);//电压输入
		SetTextFloat(3,11,InputReg[1]/1000.0,3,1);//电流输入
		
		SetTextFloat(3,17,(InputReg[13]-2000)/10.0,1,1);//温度1
		SetTextFloat(3,20,(InputReg[14]-2000)/10.0,1,1);//温度2
		SetTextFloat(3,23,(InputReg[15]-2000)/10.0,1,1);//温度3
	}
	if(current_screen_id == 4)//调节型                             
    {
		SetTextFloat(4,16,InputReg[12]/1000.0,3,1);//反馈电流
		SetTextFloat(4,6,InputReg[1]/1000.0,3,1);//电流输入
		SetTextFloat(4,14,InputReg[0]/1000.0,2,1);//电压输入
		
		SetTextFloat(4,31,(InputReg[13]-2000)/10.0,1,1);//温度1
		SetTextFloat(4,35,(InputReg[14]-2000)/10.0,1,1);//温度2
		SetTextFloat(4,38,(InputReg[15]-2000)/10.0,1,1);//温度3
	}
	if(current_screen_id != 2)
		AnimationPlayFrame(current_screen_id,66,HoldReg[25] - 1);//运行状态指示灯，由上位机控制
	
	//二维码文本添加
	if(qrfresh)
	{
		if((current_screen_id > 4) && (current_screen_id < 13)) 
			SetTextValue(current_screen_id,2,(uchar*)qrstr); 
		qrfresh = false;
	}
	
}

/*! 
*  \brief  按钮控件通知
*  \details  当按钮状态改变(或调用GetControlValue)时，执行此函数
*  \param screen_id 画面ID
*  \param control_id 控件ID
*  \param state 按钮状态：0弹起，1按下
*/
void NotifyButton(uint16_t screen_id, uint16_t control_id, uint8_t  state)
{
	if(screen_id == 1)//网络配置界面
	{
		if(control_id == 13)//重连wifi
			wifi_set_state = 1;
		if(control_id == 14)//重连服务器
			wifi_set_state = 12;
		
	}
	
	if(screen_id == 3)//开关量输出
	{
		if(control_id ==5)//开
		{
			if(state)
			{
				CoilState[0] = CoilState[0] | 0x01;
				CoilState[0] = CoilState[0] & 0xfd;
				CoilState[0] = CoilState[0] & 0xfb;
				qrfresh = 1;
			}
			else
				CoilState[0] = CoilState[0] & 0xfe;
		}
		if(control_id ==6)//关
		{
			if(state)
			{
				CoilState[0] = CoilState[0] | 0x02;
				CoilState[0] = CoilState[0] & 0xfb;
				CoilState[0] = CoilState[0] & 0xfe;
				qrfresh = 1;
			}
			else
				CoilState[0] = CoilState[0] & 0xfd;
		}
		if(control_id ==7)//ESD
		{
			if(state)
			{
				CoilState[0] = CoilState[0] | 0x04;
				CoilState[0] = CoilState[0] & 0xfe;
				CoilState[0] = CoilState[0] & 0xfd;
				qrfresh = 1;
			}
			else
				CoilState[0] = CoilState[0] & 0xfb;
		}
		
	}
	if(screen_id == 4)//电流输出
	{
		if(control_id > 6 && control_id < 12)
		{
			ao_out = (control_id - 6) * 4;//电流输出快捷键
			SetTextFloat(4,17,ao_out,3,1);//输入值跟随变化
			HoldReg[0] = ao_out  * 1000;
		}
	}
	
	if(screen_id == 12)
	{
		if(control_id == 10)
		{
			sprintf(qrstr,"%d",HoldReg[37]);
			strcat(qrstr,"&");
			strcat(qrstr,"181\0");//油腔
			qrfresh = 1;
		}
		if(control_id == 11)
		{
			sprintf(qrstr,"%d",HoldReg[37]);
			strcat(qrstr,"&");
			strcat(qrstr,"182\0");//电气腔
			qrfresh = 1;
		}
		if(control_id == 12)
		{
			sprintf(qrstr,"%d",HoldReg[37]);
			strcat(qrstr,"&");
			strcat(qrstr,"183\0");//接线腔IP防护
			qrfresh = 1;
		}
	}
}

/*! 
*  \brief  文本控件通知
*  \details  当文本通过键盘更新(或调用GetControlValue)时，执行此函数
*  \details  文本控件的内容以字符串形式下发到MCU，如果文本控件内容是浮点值，
*  \details  则需要在此函数中将下发字符串重新转回浮点值。
*  \param screen_id 画面ID
*  \param control_id 控件ID
*  \param str 文本控件内容
*/
void NotifyText(uint16_t screen_id, uint16_t control_id, uint8_t *str)
{
	if(screen_id == 0)
	{
		HoldReg[37] = strtof((const char *)str,&pEnd);//设备ID
	}
	if(screen_id == 1)
	{
		if(control_id == 8)
		{
			strcpy(wifiname,(const char*)str);//设置wifi名称
			ee_writebytes(str,100,strlen((const char*)str)+1);//保存数据，+1为了将末尾\0同时保存
		}
		if(control_id == 9)
		{
			strcpy(wifipassword,(const char*)str);//设置wifi密码
			ee_writebytes(str,200,strlen((const char*)str)+1);//保存数据，+1为了将末尾\0同时保存
		}
		if(control_id == 10)
		{

		}
		if(control_id == 11)
		{
			strcpy(hisip,(const char*)str);//设置目标IP
			ee_writebytes(str,300,strlen((const char*)str)+1);//保存数据，+1为了将末尾\0同时保存
		}
		if(control_id == 12)
		{
			strcpy(port,(const char*)str);//设置端口号
			ee_writebytes(str,400,strlen((const char*)str)+1);//保存数据，+1为了将末尾\0同时保存
		}
	}
	if(screen_id == 4)
    {
	   if(control_id == 17)
	   {
		   HoldReg[0] = strtof((const char *)str,&pEnd) * 1000;//文本输入控制AO1电流输出
	   }
    } 
}                                                                                

/*!                                                                              
*  \brief  进度条控件通知                                                       
*  \details  调用GetControlValue时，执行此函数                                  
*  \param screen_id 画面ID                                                      
*  \param control_id 控件ID                                                     
*  \param value 值                                                              
*/                                                                              
void NotifyProgress(uint16_t screen_id, uint16_t control_id, uint32_t value)           
{  
    //TODO: 添加用户代码   
}                                                                                

/*!                                                                              
*  \brief  滑动条控件通知                                                       
*  \details  当滑动条改变(或调用GetControlValue)时，执行此函数                  
*  \param screen_id 画面ID                                                      
*  \param control_id 控件ID                                                     
*  \param value 值                                                              
*/                                                                              
void NotifySlider(uint16_t screen_id, uint16_t control_id, uint32_t value)             
{    
	if(screen_id == 5)
	{

	}	
}

/*! 
*  \brief  仪表控件通知
*  \details  调用GetControlValue时，执行此函数
*  \param screen_id 画面ID
*  \param control_id 控件ID
*  \param value 值
*/
void NotifyMeter(uint16_t screen_id, uint16_t control_id, uint32_t value)
{
    //TODO: 添加用户代码
}

/*! 
*  \brief  菜单控件通知
*  \details  当菜单项按下或松开时，执行此函数
*  \param screen_id 画面ID
*  \param control_id 控件ID
*  \param item 菜单项索引
*  \param state 按钮状态：0松开，1按下
*/
void NotifyMenu(uint16_t screen_id, uint16_t control_id, uint8_t item, uint8_t state)
{
    if(screen_id == 4)
	{

	}
}

/*! 
*  \brief  选择控件通知
*  \details  当选择控件变化时，执行此函数
*  \param screen_id 画面ID
*  \param control_id 控件ID
*  \param item 当前选项
*/
void NotifySelector(uint16_t screen_id, uint16_t control_id, uint8_t  item)
{
  
}

/*! 
*  \brief  定时器超时通知处理
*  \param screen_id 画面ID
*  \param control_id 控件ID
*/
void NotifyTimer(uint16_t screen_id, uint16_t control_id)
{

}

/*! 
*  \brief  读取用户FLASH状态返回
*  \param status 0失败，1成功
*  \param _data 返回数据
*  \param length 数据长度
*/
void NotifyReadFlash(uint8_t status,uint8_t *_data,uint16_t length)
{
    //TODO: 添加用户代码
}

/*! 
*  \brief  写用户FLASH状态返回
*  \param status 0失败，1成功
*/
void NotifyWriteFlash(uint8_t status)
{
    //TODO: 添加用户代码
}

/*! 
*  \brief  读取RTC时间，注意返回的是BCD码
*  \param year 年（BCD）
*  \param month 月（BCD）
*  \param week 星期（BCD）
*  \param day 日（BCD）
*  \param hour 时（BCD）
*  \param minute 分（BCD）
*  \param second 秒（BCD）
*/
void NotifyReadRTC(uint8_t year,uint8_t month,uint8_t week,uint8_t day,uint8_t hour,uint8_t minute,uint8_t second)
{
    sec =(0xff & (second>>4))*10 +(0xf & second);                                    //BCD码转十进制
    years =(0xff & (year>>4))*10 +(0xf & year);                                      
    months =(0xff & (month>>4))*10 +(0xf & month);                                     
    weeks =(0xff & (week>>4))*10 +(0xf & week);                                      
    days =(0xff & (day>>4))*10 +(0xf & day);                                      
    hours =(0xff & (hour>>4))*10 +(0xf & hour);                                       
    minutes =(0xff & (minute>>4))*10 +(0xf & minute);                                                                     
}