首次上传-备份

Core/Src/freertos.c

@@ -198,43 +198,10 @@ void start_led_toggle_task(void const *argument)
   /* Infinite loop */
   for (;;)
   {
-    if (ec11_data.confirm_key_flag == 0)
+    HAL_GPIO_TogglePin(LED3_G_GPIO_Port, LED3_G_Pin);
-    {
-      HAL_GPIO_TogglePin(LED2_Y_GPIO_Port, LED2_Y_Pin);
-    }
-    else if (ec11_data.confirm_key_flag == 1)
-    {
-      ec11_data.confirm_key_flag_last++;
-      if (ec11_data.confirm_key_flag_last > 3)
-      {
-        current_buff[0] = (float)uart_lcd_state.current_value[0];
-        current_buff[1] = (float)uart_lcd_state.current_value[1];
-        ec11_data.confirm_key_flag_last = 0;
-        ec11_data.confirm_key_flag = 0;
-      }
-    }
-    else if (ec11_data.confirm_key_flag == 2)
-    {
-      ec11_data.confirm_key_flag_last = 0;
 
-      if (uart_lcd_state.key_state[0] == 1)
+    uart_lcd_ecll_control_current_out();
-      {
+    vTaskDelay(500);
-        uart_lcd_state.key_state[0] = 0;
-        uart_lcd_state.key_state[1] = 1;
-        uart_lcd_state.key_state[2] = 0;
-      }
-      else if (uart_lcd_state.key_state[0] == 0)
-      {
-        uart_lcd_state.key_state[0] = 1;
-        uart_lcd_state.key_state[1] = 0;
-        uart_lcd_state.key_state[2] = 1;
-      }
-
-      ec11_data.confirm_key_flag = 0;
-      uart_lcd_channel_switch(uart_lcd_state.key_state[0]);
-    }
-
-    vTaskDelay(400);
   }
   /* USER CODE END start_led_toggle_task */
 }
@@ -358,56 +325,8 @@ void start_ec11_task(void const *argument)
   /* Infinite loop */
   for (;;)
   {
-    ec11_data.direction = __HAL_TIM_IS_TIM_COUNTING_DOWN(&htim1);
+
-    ec11_data.encode_num = (short)__HAL_TIM_GET_COUNTER(&htim1);
+    uart_lcd_ec11_control_current();
-    if ((ec11_data.direction == 0) && (ec11_data.encode_num > ec11_data.encode_num_last))
-    {
-      if (uart_lcd_state.key_state[0] == 0)
-      {
-        uart_lcd_state.current_value[0] += 1;
-        if (uart_lcd_state.current_value[0] > 20)
-        {
-          uart_lcd_state.current_value[0] = 20;
-        }
-      }
-      else if (uart_lcd_state.key_state[0] == 1)
-      {
-        uart_lcd_state.current_value[1] += 1;
-        if (uart_lcd_state.current_value[1] > 20)
-        {
-          uart_lcd_state.current_value[1] = 20;
-        }
-      }
-      // current_buff[0] = (float)uart_lcd_state.current_value[0];
-    }
-    if ((ec11_data.direction == 1) && (ec11_data.encode_num < ec11_data.encode_num_last))
-    {
-      if (uart_lcd_state.key_state[0] == 0)
-      {
-        if (uart_lcd_state.current_value[0] < 2)
-        {
-          uart_lcd_state.current_value[0] = 0;
-        }
-        else
-        {
-          uart_lcd_state.current_value[0] -= 1;
-        }
-      }
-      else if (uart_lcd_state.key_state[0] == 1)
-      {
-        if (uart_lcd_state.current_value[1] < 2)
-        {
-          uart_lcd_state.current_value[1] = 0;
-        }
-        else
-        {
-          uart_lcd_state.current_value[1] -= 1;
-        }
-      }
-      // current_buff[1] = (float)uart_lcd_state.current_value[1];
-    }
-    uart_lcd_current_out(uart_lcd_state.key_state[0]);
-    ec11_data.encode_num_last = ec11_data.encode_num;
     vTaskDelay(100);
   }
   /* USER CODE END start_ec11_task */

Core/Src/main.c

@@ -126,7 +126,7 @@ int main(void)
   MX_TIM1_Init();
   MX_USART1_UART_Init();
   /* USER CODE BEGIN 2 */
-  /*閰濈疆鍧勪覆鍧ｇ殑DMA鎺ユ敹*/
+  /*閰濈疆鍧勪覆鍧ｇ殑DMA鎺ユ敹*/
   // start
   HAL_UARTEx_ReceiveToIdle_DMA(&huart4, lcd_uart4.rx_data_temp, ARRAY_LEN(lcd_uart4.rx_data_temp));
   HAL_UARTEx_ReceiveToIdle_DMA(&huart6, ble1_uart6.rx_data_temp, ARRAY_LEN(ble1_uart6.rx_data_temp));
@@ -135,9 +135,9 @@ int main(void)
   HAL_UARTEx_ReceiveToIdle_DMA(&huart2, hart2_uart2.rx_data_temp, ARRAY_LEN(hart2_uart2.rx_data_temp));
   HAL_UARTEx_ReceiveToIdle_DMA(&huart1, usb_uart1.rx_data_temp, ARRAY_LEN(usb_uart1.rx_data_temp));
   // end
-  hart_ht1200m_reset();                           // 鍒濆鍖朒T1200M妯″潡
+  hart_ht1200m_reset();                           // 鍒濆?鍖朒T1200M妯″潡
-  HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1);       // PWM杈撳嚭锛岀敤浜庨┍鍔℉T1200M妯″潡
+  HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1);       // PWM杈撳嚭锛岀敤浜庨┍鍔℉T1200M妯″潡
-  HAL_TIM_Encoder_Start(&htim1, TIM_CHANNEL_ALL); // 鏃嬭浆缂栫牆鍣ㄨ緭锟<EFBFBD>??
+  HAL_TIM_Encoder_Start(&htim1, TIM_CHANNEL_ALL); // 鏃嬭浆缂栫牆鍣ㄨ緭锟???
   /* USER CODE END 2 */
 
   /* Call init function for freertos objects (in freertos.c) */
@@ -213,7 +213,7 @@ void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size)
     memcpy(usb_uart1.rx_data, usb_uart1.rx_data_temp, Size);
     HAL_UARTEx_ReceiveToIdle_DMA(&huart1, usb_uart1.rx_data_temp, ARRAY_LEN(usb_uart1.rx_data_temp));
     // dma_usart_send(&huart4, usb_uart1.rx_data_temp, usb_uart1.rx_num);
-    // ip鍦板潃淇敼澶勭悊
+    // ip鍦板潃淇?敼澶勭悊
     IP4_ADDR(&ipaddr, usb_uart1.rx_data_temp[0], usb_uart1.rx_data_temp[1], usb_uart1.rx_data_temp[2], usb_uart1.rx_data_temp[3]);
     gnetif.ip_addr = ipaddr;
     if (flash_write_data(FLASH_USER_START_ADDR, usb_uart1.rx_data_temp, Size) == HAL_OK)
@@ -294,6 +294,25 @@ void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
     HART2_RTS_RECEIVE;
   }
 }
+
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  if (GPIO_Pin == EC11_KEY_Pin)
+  {
+    if (ec11_data.confirm_key_flag == 0)
+    {
+      ec11_data.confirm_key_flag = 1;
+    }
+    else if (ec11_data.confirm_key_flag == 1)
+    {
+      ec11_data.confirm_key_flag = 2;
+    }
+    else if (ec11_data.confirm_key_flag == 2)
+    {
+      ec11_data.confirm_key_flag = 3;
+    }
+  }
+}
 /* USER CODE END 4 */
 
 /**
@@ -330,7 +349,7 @@ void Error_Handler(void)
   //  while (1)
   //  {
   //  }
-  // TODO  这里暂时注释，导致原因为DMA发送太快，导致发送失败
+  // TODO  这里暂时注释，导致原因为DMA发送太快，导致发送失败
   /* USER CODE END Error_Handler_Debug */
 }
 

Core/Src/stm32f4xx_it.c

@@ -92,8 +92,8 @@ extern TIM_HandleTypeDef htim4;
 /*           Cortex-M4 Processor Interruption and Exception Handlers          */
 /******************************************************************************/
 /**
-  * @brief This function handles Non maskable interrupt.
+ * @brief This function handles Non maskable interrupt.
-  */
+ */
 void NMI_Handler(void)
 {
   /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
@@ -107,8 +107,8 @@ void NMI_Handler(void)
 }
 
 /**
-  * @brief This function handles Hard fault interrupt.
+ * @brief This function handles Hard fault interrupt.
-  */
+ */
 void HardFault_Handler(void)
 {
   /* USER CODE BEGIN HardFault_IRQn 0 */
@@ -122,8 +122,8 @@ void HardFault_Handler(void)
 }
 
 /**
-  * @brief This function handles Memory management fault.
+ * @brief This function handles Memory management fault.
-  */
+ */
 void MemManage_Handler(void)
 {
   /* USER CODE BEGIN MemoryManagement_IRQn 0 */
@@ -137,8 +137,8 @@ void MemManage_Handler(void)
 }
 
 /**
-  * @brief This function handles Pre-fetch fault, memory access fault.
+ * @brief This function handles Pre-fetch fault, memory access fault.
-  */
+ */
 void BusFault_Handler(void)
 {
   /* USER CODE BEGIN BusFault_IRQn 0 */
@@ -152,8 +152,8 @@ void BusFault_Handler(void)
 }
 
 /**
-  * @brief This function handles Undefined instruction or illegal state.
+ * @brief This function handles Undefined instruction or illegal state.
-  */
+ */
 void UsageFault_Handler(void)
 {
   /* USER CODE BEGIN UsageFault_IRQn 0 */
@@ -167,8 +167,8 @@ void UsageFault_Handler(void)
 }
 
 /**
-  * @brief This function handles Debug monitor.
+ * @brief This function handles Debug monitor.
-  */
+ */
 void DebugMon_Handler(void)
 {
   /* USER CODE BEGIN DebugMonitor_IRQn 0 */
@@ -187,8 +187,8 @@ void DebugMon_Handler(void)
 /******************************************************************************/
 
 /**
-  * @brief This function handles EXTI line1 interrupt.
+ * @brief This function handles EXTI line1 interrupt.
-  */
+ */
 void EXTI1_IRQHandler(void)
 {
   /* USER CODE BEGIN EXTI1_IRQn 0 */
@@ -201,8 +201,8 @@ void EXTI1_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles EXTI line3 interrupt.
+ * @brief This function handles EXTI line3 interrupt.
-  */
+ */
 void EXTI3_IRQHandler(void)
 {
   /* USER CODE BEGIN EXTI3_IRQn 0 */
@@ -215,8 +215,8 @@ void EXTI3_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream0 global interrupt.
+ * @brief This function handles DMA1 stream0 global interrupt.
-  */
+ */
 void DMA1_Stream0_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream0_IRQn 0 */
@@ -229,8 +229,8 @@ void DMA1_Stream0_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream1 global interrupt.
+ * @brief This function handles DMA1 stream1 global interrupt.
-  */
+ */
 void DMA1_Stream1_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream1_IRQn 0 */
@@ -243,8 +243,8 @@ void DMA1_Stream1_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream2 global interrupt.
+ * @brief This function handles DMA1 stream2 global interrupt.
-  */
+ */
 void DMA1_Stream2_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream2_IRQn 0 */
@@ -257,8 +257,8 @@ void DMA1_Stream2_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream3 global interrupt.
+ * @brief This function handles DMA1 stream3 global interrupt.
-  */
+ */
 void DMA1_Stream3_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream3_IRQn 0 */
@@ -271,8 +271,8 @@ void DMA1_Stream3_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream4 global interrupt.
+ * @brief This function handles DMA1 stream4 global interrupt.
-  */
+ */
 void DMA1_Stream4_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream4_IRQn 0 */
@@ -285,8 +285,8 @@ void DMA1_Stream4_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream5 global interrupt.
+ * @brief This function handles DMA1 stream5 global interrupt.
-  */
+ */
 void DMA1_Stream5_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream5_IRQn 0 */
@@ -299,8 +299,8 @@ void DMA1_Stream5_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream6 global interrupt.
+ * @brief This function handles DMA1 stream6 global interrupt.
-  */
+ */
 void DMA1_Stream6_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream6_IRQn 0 */
@@ -313,8 +313,8 @@ void DMA1_Stream6_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles EXTI line[9:5] interrupts.
+ * @brief This function handles EXTI line[9:5] interrupts.
-  */
+ */
 void EXTI9_5_IRQHandler(void)
 {
   /* USER CODE BEGIN EXTI9_5_IRQn 0 */
@@ -322,20 +322,13 @@ void EXTI9_5_IRQHandler(void)
   /* USER CODE END EXTI9_5_IRQn 0 */
   HAL_GPIO_EXTI_IRQHandler(EC11_KEY_Pin);
   /* USER CODE BEGIN EXTI9_5_IRQn 1 */
-  if (ec11_data.confirm_key_flag == 1)
+
-  {
-    ec11_data.confirm_key_flag = 2;
-  }
-  else if (ec11_data.confirm_key_flag == 0)
-  {
-    ec11_data.confirm_key_flag = 1;
-  }
   /* USER CODE END EXTI9_5_IRQn 1 */
 }
 
 /**
-  * @brief This function handles TIM4 global interrupt.
+ * @brief This function handles TIM4 global interrupt.
-  */
+ */
 void TIM4_IRQHandler(void)
 {
   /* USER CODE BEGIN TIM4_IRQn 0 */
@@ -348,8 +341,8 @@ void TIM4_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles USART1 global interrupt.
+ * @brief This function handles USART1 global interrupt.
-  */
+ */
 void USART1_IRQHandler(void)
 {
   /* USER CODE BEGIN USART1_IRQn 0 */
@@ -362,8 +355,8 @@ void USART1_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles USART2 global interrupt.
+ * @brief This function handles USART2 global interrupt.
-  */
+ */
 void USART2_IRQHandler(void)
 {
   /* USER CODE BEGIN USART2_IRQn 0 */
@@ -375,8 +368,8 @@ void USART2_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles USART3 global interrupt.
+ * @brief This function handles USART3 global interrupt.
-  */
+ */
 void USART3_IRQHandler(void)
 {
   /* USER CODE BEGIN USART3_IRQn 0 */
@@ -389,8 +382,8 @@ void USART3_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA1 stream7 global interrupt.
+ * @brief This function handles DMA1 stream7 global interrupt.
-  */
+ */
 void DMA1_Stream7_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA1_Stream7_IRQn 0 */
@@ -403,8 +396,8 @@ void DMA1_Stream7_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles UART4 global interrupt.
+ * @brief This function handles UART4 global interrupt.
-  */
+ */
 void UART4_IRQHandler(void)
 {
   /* USER CODE BEGIN UART4_IRQn 0 */
@@ -416,8 +409,8 @@ void UART4_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles UART5 global interrupt.
+ * @brief This function handles UART5 global interrupt.
-  */
+ */
 void UART5_IRQHandler(void)
 {
   /* USER CODE BEGIN UART5_IRQn 0 */
@@ -428,8 +421,8 @@ void UART5_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA2 stream1 global interrupt.
+ * @brief This function handles DMA2 stream1 global interrupt.
-  */
+ */
 void DMA2_Stream1_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA2_Stream1_IRQn 0 */
@@ -442,8 +435,8 @@ void DMA2_Stream1_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA2 stream2 global interrupt.
+ * @brief This function handles DMA2 stream2 global interrupt.
-  */
+ */
 void DMA2_Stream2_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA2_Stream2_IRQn 0 */
@@ -456,8 +449,8 @@ void DMA2_Stream2_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles Ethernet global interrupt.
+ * @brief This function handles Ethernet global interrupt.
-  */
+ */
 void ETH_IRQHandler(void)
 {
   /* USER CODE BEGIN ETH_IRQn 0 */
@@ -470,8 +463,8 @@ void ETH_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA2 stream6 global interrupt.
+ * @brief This function handles DMA2 stream6 global interrupt.
-  */
+ */
 void DMA2_Stream6_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA2_Stream6_IRQn 0 */
@@ -484,8 +477,8 @@ void DMA2_Stream6_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles DMA2 stream7 global interrupt.
+ * @brief This function handles DMA2 stream7 global interrupt.
-  */
+ */
 void DMA2_Stream7_IRQHandler(void)
 {
   /* USER CODE BEGIN DMA2_Stream7_IRQn 0 */
@@ -498,8 +491,8 @@ void DMA2_Stream7_IRQHandler(void)
 }
 
 /**
-  * @brief This function handles USART6 global interrupt.
+ * @brief This function handles USART6 global interrupt.
-  */
+ */
 void USART6_IRQHandler(void)
 {
   /* USER CODE BEGIN USART6_IRQn 0 */

LCD/signal generator/current_out.tft

@@ -0,0 +1 @@
+<DrawPage name="current_out" bk_transparent="0" bk_color="255;255;255" bk_image="" size_option="0" width="240" height="320"><item name="Button1" id="1" type="button" button_type="1" focus="0" notify_disable="1" key_code="a" key_type="0" init_state="0" button_style="0" longpress_delay="0" url_down="" url_up="" popup_menu_id="0" input_text_id="0" switch="" switch_effect="0" switch_area="0" switch_area_left="0" switch_area_right="0" switch_area_top="0" switch_area_bottom="0" action="" xOffset="0" yOffset="0" width="320" height="59" cut_up="0" cut_up_offset_x="0" cut_up_offset_y="0" cut_down="0" cut_down_offset_x="0" cut_down_offset_y="0" custom_data_up="" custom_data_down="" external_data_up="" external_data_down="" external_data_delay="100" child_screen="0" need_login="0" login_password="888888" show_text_state="1" font="10" font_color_up="0;0;0" font_color_down="0;0;0" text_state_up="第一路输出控制" text_state_down="第二路输出控制" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Button2" id="2" type="button" button_type="1" focus="1" notify_disable="0" key_code="a" key_type="0" init_state="1" button_style="0" longpress_delay="0" url_down="Images\780.jpg" url_up="" popup_menu_id="0" input_text_id="0" switch="" switch_effect="0" switch_area="0" switch_area_left="0" switch_area_right="0" switch_area_top="0" switch_area_bottom="0" action="" xOffset="4" yOffset="70" width="60" height="60" cut_up="0" cut_up_offset_x="0" cut_up_offset_y="0" cut_down="0" cut_down_offset_x="0" cut_down_offset_y="0" custom_data_up="" custom_data_down="" external_data_up="" external_data_down="" external_data_delay="100" child_screen="0" need_login="0" login_password="888888" show_text_state="0" font="7" font_color_up="255;255;255" font_color_down="255;255;255" text_state_up="" text_state_down="" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Button3" id="3" type="button" button_type="1" focus="1" notify_disable="0" key_code="a" key_type="0" init_state="0" button_style="0" longpress_delay="0" url_down="images\780.jpg" url_up="" popup_menu_id="0" input_text_id="0" switch="" switch_effect="0" switch_area="0" switch_area_left="0" switch_area_right="0" switch_area_top="0" switch_area_bottom="0" action="" xOffset="4" yOffset="150" width="60" height="60" cut_up="0" cut_up_offset_x="4" cut_up_offset_y="150" cut_down="0" cut_down_offset_x="0" cut_down_offset_y="0" custom_data_up="" custom_data_down="" external_data_up="" external_data_down="" external_data_delay="100" child_screen="0" need_login="0" login_password="888888" show_text_state="0" font="7" font_color_up="255;255;255" font_color_down="255;255;255" text_state_up="" text_state_down="" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Slider1" id="4" type="slider" xOffset="71" yOffset="70" width="245" height="60" value="0" start_value="0" end_value="20" input="1" notify="0" direction="0" mark_type="0" mark_count="10" mark_color="0;0;0" show_value="1" left_space="24" right_space="24" bkg_type="1" bkg_image_path="" bkg_color="255;255;255" cursor_type="0" cursor_direction="0" cursor_offset="14" cursor_width="24" cursor_height="24" cursor_image_path="" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Slider2" id="5" type="slider" xOffset="69" yOffset="150" width="245" height="60" value="0" start_value="0" end_value="20" input="1" notify="0" direction="0" mark_type="0" mark_count="10" mark_color="0;0;0" show_value="1" left_space="24" right_space="24" bkg_type="1" bkg_image_path="" bkg_color="255;255;255" cursor_type="0" cursor_direction="0" cursor_offset="14" cursor_width="24" cursor_height="24" cursor_image_path="" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/></DrawPage>

LCD/signal generator/dciot_build/private/ctrlboard.ini

@@ -0,0 +1,24 @@
+[tcpip]
+dhcp=n
+ipaddr=192.168.1.100
+netmask=255.255.255.0
+gw=192.168.1.1
+dns=192.168.1.1
+server_port=5050
+remote_ip=192.168.1.200
+network_transfer=0
+network_mode=0
+
+[ctrlboard]
+lcd_width=320
+lcd_height=240
+baudrate=115200
+enable_keysound=0
+audiolevel=100
+
+[wifi]
+wifi_mode=0
+ssid=
+password=
+secumode=0
+

LCD/signal generator/dciot_build/private/ctrlboard.ini.crc

@@ -0,0 +1 @@
+<EFBFBD>uc<EFBFBD>

LCD/signal generator/dciot_build/private/main.lua

@@ -0,0 +1,37 @@
+------------------------------------
+-- 提示
+-- 如果使用其他Lua编辑工具编辑此文档，请将VisualTFT软件中打开的此文件编辑器视图关闭，
+-- 因为VisualTFT具有自动保存功能，其他软件修改时不能同步到VisualTFT编辑视图，
+-- VisualTFT定时保存时，其他软件修改的内容将被恢复。
+--
+-- Attention
+-- If you use other Lua Editor to edit this file, please close the file editor view 
+-- opened in the VisualTFT, Because VisualTFT has an automatic save function, 
+-- other Lua Editor cannot be synchronized to the VisualTFT edit view when it is modified.
+-- When VisualTFT saves regularly, the content modified by other Lua Editor will be restored.
+------------------------------------
+
+--下面列出了常用的回调函数
+--更多功能请阅读<<LUA脚本API.pdf>>
+
+
+--初始化函数
+--function on_init()
+--end
+
+--定时回调函数，系统每隔1秒钟自动调用。
+--function on_systick()
+--end
+
+--定时器超时回调函数，当设置的定时器超时时，执行此回调函数，timer_id为对应的定时器ID
+--function on_timer(timer_id)
+--end
+
+--用户通过触摸修改控件后，执行此回调函数。
+--点击按钮控件，修改文本控件、修改滑动条都会触发此事件。
+--function on_control_notify(screen,control,value)
+--end
+
+--当画面切换时，执行此回调函数，screen为目标画面。
+--function on_screen_change(screen)
+--end

LCD/signal generator/dciot_build/private/truefont/truefont.ini

@@ -0,0 +1,2 @@
+[setting]
+font0=wqymicrohei.ttf

LCD/signal generator/font/fonts.xml

@@ -0,0 +1,32 @@
+<fonts ttf="wqyMicroHei.ttf">
+  <font id="0" type="2" name="ASC_CHS_8" width="4" height="8"/>
+  <font id="1" type="2" name="ASC_CHS_10" width="5" height="10"/>
+  <font id="2" type="2" name="ASC_CHS_12" width="6" height="12"/>
+  <font id="3" type="2" name="ASC_CHS_14" width="7" height="14"/>
+  <font id="4" type="2" name="ASC_CHS_16" width="8" height="16"/>
+  <font id="5" type="2" name="ASC_CHS_18" width="9" height="18"/>
+  <font id="6" type="2" name="ASC_CHS_20" width="10" height="20"/>
+  <font id="7" type="2" name="ASC_CHS_22" width="11" height="22"/>
+  <font id="8" type="2" name="ASC_CHS_24" width="12" height="24"/>
+  <font id="9" type="2" name="ASC_CHS_26" width="13" height="26"/>
+  <font id="10" type="2" name="ASC_CHS_28" width="14" height="28"/>
+  <font id="11" type="2" name="ASC_CHS_30" width="15" height="30"/>
+  <font id="12" type="2" name="ASC_CHS_32" width="16" height="32"/>
+  <font id="13" type="2" name="ASC_CHS_36" width="18" height="36"/>
+  <font id="14" type="2" name="ASC_CHS_40" width="20" height="40"/>
+  <font id="15" type="2" name="ASC_CHS_44" width="22" height="44"/>
+  <font id="16" type="2" name="ASC_CHS_48" width="24" height="48"/>
+  <font id="17" type="2" name="ASC_CHS_52" width="26" height="52"/>
+  <font id="18" type="2" name="ASC_CHS_56" width="28" height="56"/>
+  <font id="19" type="2" name="ASC_CHS_60" width="30" height="60"/>
+  <font id="20" type="2" name="ASC_CHS_64" width="32" height="64"/>
+  <font id="21" type="2" name="ASC_CHS_80" width="40" height="80"/>
+  <font id="22" type="2" name="ASC_CHS_96" width="48" height="96"/>
+  <font id="23" type="2" name="ASC_CHS_112" width="56" height="112"/>
+  <font id="24" type="2" name="ASC_CHS_128" width="64" height="128"/>
+  <font id="25" type="2" name="ASC_CHS_144" width="72" height="144"/>
+  <font id="26" type="2" name="ASC_CHS_160" width="80" height="160"/>
+  <font id="27" type="2" name="ASC_CHS_176" width="88" height="176"/>
+  <font id="28" type="2" name="ASC_CHS_192" width="96" height="192"/>
+  <font id="29" type="2" name="ASC_CHS_200" width="100" height="200"/>
+</fonts>

LCD/signal generator/main.lua

@@ -0,0 +1,37 @@
+------------------------------------
+-- 提示
+-- 如果使用其他Lua编辑工具编辑此文档，请将VisualTFT软件中打开的此文件编辑器视图关闭，
+-- 因为VisualTFT具有自动保存功能，其他软件修改时不能同步到VisualTFT编辑视图，
+-- VisualTFT定时保存时，其他软件修改的内容将被恢复。
+--
+-- Attention
+-- If you use other Lua Editor to edit this file, please close the file editor view 
+-- opened in the VisualTFT, Because VisualTFT has an automatic save function, 
+-- other Lua Editor cannot be synchronized to the VisualTFT edit view when it is modified.
+-- When VisualTFT saves regularly, the content modified by other Lua Editor will be restored.
+------------------------------------
+
+--下面列出了常用的回调函数
+--更多功能请阅读<<LUA脚本API.pdf>>
+
+
+--初始化函数
+--function on_init()
+--end
+
+--定时回调函数，系统每隔1秒钟自动调用。
+--function on_systick()
+--end
+
+--定时器超时回调函数，当设置的定时器超时时，执行此回调函数，timer_id为对应的定时器ID
+--function on_timer(timer_id)
+--end
+
+--用户通过触摸修改控件后，执行此回调函数。
+--点击按钮控件，修改文本控件、修改滑动条都会触发此事件。
+--function on_control_notify(screen,control,value)
+--end
+
+--当画面切换时，执行此回调函数，screen为目标画面。
+--function on_screen_change(screen)
+--end

LCD/signal generator/monitoring.tft

@@ -0,0 +1,2 @@
+<DrawPage name="monitoring" bk_transparent="0" bk_color="255;255;255" bk_image="" size_option="0" width="240" height="320"><item name="Text_Display2" id="5" type="text_display" text="" tipinfo="" font="4" encode="1" show_bkg_style="0" fore_color="102;255;102" bkg_color="0;255;0" bkg_image_path="" xOffset="35" yOffset="200" width="45" height="40" input_mode="0" variant="0" text_type="0" text_len_max="255" password="0" focus_rect="0" text_align="1" text_align_v="1" value_limit="0" value_precision="0" max_value="100" min_value="0" keyboard_init="0" keyboard_position="0" keyboard_x="0" keyboard_y="0" art_digit="0" art_digit_icon="" half_width_dot="0" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Text_Display4" id="6" type="text_display" text="" tipinfo="" font="4" encode="1" show_bkg_style="0" fore_color="255;0;0" bkg_color="0;255;0" bkg_image_path="" xOffset="115" yOffset="200" width="45" height="40" input_mode="0" variant="0" text_type="0" text_len_max="255" password="0" focus_rect="0" text_align="1" text_align_v="1" value_limit="0" value_precision="0" max_value="100" min_value="0" keyboard_init="0" keyboard_position="0" keyboard_x="0" keyboard_y="0" art_digit="0" art_digit_icon="" half_width_dot="0" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Text_Display6" id="7" type="text_display" text="" tipinfo="" font="4" encode="1" show_bkg_style="0" fore_color="0;0;255" bkg_color="0;255;0" bkg_image_path="" xOffset="195" yOffset="200" width="45" height="40" input_mode="0" variant="0" text_type="0" text_len_max="255" password="0" focus_rect="0" text_align="1" text_align_v="1" value_limit="0" value_precision="0" max_value="100" min_value="0" keyboard_init="0" keyboard_position="0" keyboard_x="0" keyboard_y="0" art_digit="0" art_digit_icon="" half_width_dot="0" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Text_Display8" id="8" type="text_display" text="" tipinfo="" font="4" encode="1" show_bkg_style="0" fore_color="204;204;0" bkg_color="0;255;0" bkg_image_path="" xOffset="275" yOffset="200" width="45" height="40" input_mode="0" variant="0" text_type="0" text_len_max="255" password="0" focus_rect="0" text_align="1" text_align_v="1" value_limit="0" value_precision="0" max_value="100" min_value="0" keyboard_init="0" keyboard_position="0" keyboard_x="0" keyboard_y="0" art_digit="0" art_digit_icon="" half_width_dot="0" bind_variant="" show_condition="0" condition_variant="" condition_value="0"/><item name="Text1" id="1" type="text" multi_lang="1" text_align="1" text_align_v="1" text="SW1:
+" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="4" encode="0" show_bk="0" fore_color="0;128;0" bk_color="255;255;255" xOffset="0" yOffset="200" width="35" height="40" row_gap="0" col_gap="0"/><item name="Text2" id="2" type="text" multi_lang="1" text_align="1" text_align_v="1" text="SW2:" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="4" encode="0" show_bk="0" fore_color="255;0;0" bk_color="255;255;255" xOffset="80" yOffset="200" width="35" height="40" row_gap="0" col_gap="0"/><item name="Text3" id="3" type="text" multi_lang="1" text_align="1" text_align_v="1" text="S.P:" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="4" encode="0" show_bk="0" fore_color="0;0;255" bk_color="255;255;255" xOffset="160" yOffset="200" width="35" height="40" row_gap="0" col_gap="0"/><item name="Text4" id="4" type="text" multi_lang="1" text_align="1" text_align_v="1" text="A.P:" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="4" encode="0" show_bk="0" fore_color="204;204;0" bk_color="255;255;255" xOffset="240" yOffset="200" width="35" height="40" row_gap="0" col_gap="0"/><item name="Line1" id="9" type="line" x0="23" y0="0" x1="23" y1="190" pen_width="1" pen_color="0;0;0"/><item name="Text5" id="10" type="text" multi_lang="1" text_align="0" text_align_v="0" text="100" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="3" encode="0" show_bk="0" fore_color="0;0;0" bk_color="255;255;255" xOffset="1" yOffset="10" width="34" height="21" row_gap="0" col_gap="0"/><item name="Text6" id="11" type="text" multi_lang="1" text_align="0" text_align_v="0" text="50" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="3" encode="0" show_bk="0" fore_color="0;0;0" bk_color="255;255;255" xOffset="5" yOffset="100" width="34" height="21" row_gap="0" col_gap="0"/><item name="Text7" id="12" type="text" multi_lang="1" text_align="0" text_align_v="0" text="0" text1="" text2="" text3="" text4="" text5="" text6="" text7="" text8="" text9="" text10="" text11="" text12="" text13="" text14="" text15="" font="3" encode="0" show_bk="0" fore_color="0;0;0" bk_color="255;255;255" xOffset="1" yOffset="185" width="34" height="21" row_gap="0" col_gap="0"/><item name="Line2" id="13" type="line" x0="23" y0="190" x1="315" y1="190" pen_width="1" pen_color="0;0;0"/><item name="Graph1" id="14" type="graph" xOffset="25" yOffset="23" width="288" height="164" sample_count="260" sample_depth="1" anti_aliasing="1" direction="0" line_width="1" scale="1" start_value="0" end_value="100" channel_count="4" channel_color0="0;128;0" channel_color1="255;0;0" channel_color2="0;0;255" channel_color3="204;204;0" channel_color4="255;255;255" channel_color5="255;255;255" channel_color6="255;255;255" channel_color7="255;255;255"/></DrawPage>

LCD/signal generator/output/DefineID.h

@@ -0,0 +1,29 @@
+//创建画面current_out的命令索引ID
+#define  _SCREEN_CURRENT_OUT                                                   0
+
+//创建画面monitoring的命令索引ID
+#define  _SCREEN_MONITORING                                                    1
+
+#define  _BTN_CURRENT_OUT_BUTTON1                                              1
+
+#define  _BTN_CURRENT_OUT_BUTTON2                                              2
+
+//画面current_out中按钮Button3按下时的图片
+#define  _IMG_CURRENT_OUT_BUTTON3_DOWN                                         0
+
+#define  _BTN_CURRENT_OUT_BUTTON3                                              3
+
+#define  _SLIDER_CURRENT_OUT_SLIDER1                                           4
+
+#define  _SLIDER_CURRENT_OUT_SLIDER2                                           5
+
+#define  _TXT_DIS__MONITORING_TEXT_DISPLAY2                                    5
+
+#define  _TXT_DIS__MONITORING_TEXT_DISPLAY4                                    6
+
+#define  _TXT_DIS__MONITORING_TEXT_DISPLAY6                                    7
+
+#define  _TXT_DIS__MONITORING_TEXT_DISPLAY8                                    8
+
+#define  _GRAPH_MONITORING_GRAPH1                                             14
+

LCD/signal generator/output/charset.txt

@@ -0,0 +1,2 @@
+ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz`1234567890-=[];',./~!@#$%^&*()_+{}:"<>? 年月日时分秒星期一二三四五六日
+第路输出控制

LCD/signal generator/output/controls.xml

@@ -0,0 +1 @@
+<controls count="10"><control type="16" count="3"/><control type="17" count="4"/><control type="19" count="2"/><control type="24" count="1"/></controls>

LCD/signal generator/output/signal generator.tftres

@@ -0,0 +1,13 @@
+<Resource>
+    <pages>
+        <page name="current_out" id="0" />
+        <page name="monitoring" id="1" />
+    </pages>
+    <images>
+        <image id="0" url="e:\work\项目资料\显示屏工程\signal generator\Images\780.jpg" effect_width="60" effect_height="60" />
+        <image id="1" url="C:\Users\WANGXU~1\AppData\Local\Temp\slider_0_4.png" effect_width="60" effect_height="245" />
+        <image id="2" url="C:\Users\WANGXU~1\AppData\Local\Temp\cursor_0_0.png" effect_width="24" effect_height="24" />
+        <image id="3" url="C:\Users\WANGXU~1\AppData\Local\Temp\slider_0_5.png" effect_width="60" effect_height="245" />
+    </images>
+    <waves />
+</Resource>

LCD/signal generator/output/truefont/truefont.ini

@@ -0,0 +1,2 @@
+[setting]
+font0=wqymicrohei.ttf

LCD/signal generator/signal generator.tftprj

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<VisualTFT Name="signal generator" OutputDirectory="output\" StartupPage="current_out" StartupAction="" StartupActionLoop="1" DeviceType="28000" DeviceEnableControl="1" DeviceEnableTouchPane="1" DeviceEnableBuzzer="2" DeviceEnableCRC="0" DeviceBaudRate="7" DeviceCoordinateUpdateMode="4" DeviceControlNotify="3" DeviceScreenNotify="1" DeviceScreenRvs="1" DeviceBacklightAutoControl="0" DeviceBacklightTime="10" DeviceBacklightOn="200" DeviceBacklightOff="50" DeviceBacklightNotify="0" DeviceLockConfig="1" DeviceStartupVoice="0" DeviceVoiceVolume="100" DeviceEnableSlidingScreen="0" BeginSlidingScreen="" EndSlidingScreen="" CompatibleScreenRotate="1" AddResourceFloder="1" FastRefreshScreen="0" DelayInitScreen="0" ImageDithering="1" ImageFormat="1" JPEGQuality="95" StartupLogo="" DHCP="0" IPAddress="192.168.1.100" NetMask="255.255.255.0" Gateway="192.168.1.1" DNS="192.168.1.1" NetworkMode="0" ServerAddress="192.168.1.200" ServicePort="5050" NetworkTransfer="0" WifiMode="0" WifiSSID="" WifiPassword="" FlashType="1" PartitionSize0="100" PartitionSize1="10" PartitionSize2="0" Repartition="1" FormatPartition="1" UartDownloadSpeed="0" PKGSetting="0" PKGControl="1" PKGImage="1" PKGFont="1" PKGOther="1" Version="1.0" EnableSlidingRange="0" EnableKeysound="0" BacklightAutoControl="0" BacklightNotify="0" StandbyPage="" ServerPort="5050" WifiSSI="">
+  <Pages><Page RelativePath="current_out.tft"/><Page RelativePath="monitoring.tft"/></Pages>
+  <Images/>
+  <Waves/>
+</VisualTFT>

MDK-ARM/signal_generator.uvoptx

@@ -154,14 +154,14 @@
           <Type>0</Type>
           <LineNumber>1404</LineNumber>
           <EnabledFlag>1</EnabledFlag>
-          <Address>134235956</Address>
+          <Address>134235972</Address>
           <ByteObject>0</ByteObject>
           <HtxType>0</HtxType>
           <ManyObjects>0</ManyObjects>
           <SizeOfObject>0</SizeOfObject>
           <BreakByAccess>0</BreakByAccess>
           <BreakIfRCount>1</BreakIfRCount>
-          <Filename>../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c</Filename>
+          <Filename>E:\WORK\浠ｇ爜-椤圭洰\positioner_testing\signal_generator\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</Filename>
           <ExecCommand></ExecCommand>
           <Expression>\\signal_generator\../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c\1404</Expression>
         </Bp>
@@ -450,7 +450,7 @@
 
   <Group>
     <GroupName>Drivers/STM32F4xx_HAL_Driver</GroupName>
-    <tvExp>1</tvExp>
+    <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>

MDK-ARM/signal_generator.uvprojx

@@ -16,8 +16,8 @@
         <TargetCommonOption>
           <Device>STM32F407VGTx</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32F4xx_DFP.2.17.1</PackID>
+          <PackID>Keil.STM32F4xx_DFP.2.12.0</PackID>
-          <PackURL>https://www.keil.com/pack/</PackURL>
+          <PackURL>http://www.keil.com/pack</PackURL>
           <Cpu>IRAM(0x20000000-0x2001BFFF) IRAM2(0x2001C000-0x2001FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) FPU2 CPUTYPE("Cortex-M4") TZ</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>

User/driver/uart_lcd.c

@@ -1,9 +1,10 @@
 #include "uart_lcd.h"
 #include "usart.h"
 #include "lwip.h"
-
+#include "tim.h"
 extern ip4_addr_t ipaddr;
 uart_lcd_t uart_lcd_state = {0};
+extern float current_buff[2];
 uint8_t uart_lcd_data[24] = {0xEE, 0xB1, 0x12, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x02, 0x00, 0x01, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0xFF, 0xFC, 0xFF, 0xFF};
 
 static void uart_lcd_current_channel1(void);
@@ -20,7 +21,18 @@ static void uart_lcd_current_channel2(void)
 {
     dma_usart_send(&huart4, uart_lcd_data2, ARRAY_LEN(uart_lcd_data2));
 }
-
+uint8_t uart_lcd_data3[9] = {0xEE, 0xB1, 0x00, 0x00, 0x00, 0xFF, 0xFC, 0xFF, 0xFF};
+static void uart_lcd_page1(void)
+{
+    uart_lcd_state.page_num = 0;
+    dma_usart_send(&huart4, uart_lcd_data3, ARRAY_LEN(uart_lcd_data3));
+}
+uint8_t uart_lcd_data4[9] = {0xEE, 0xB1, 0x00, 0x00, 0x01, 0xFF, 0xFC, 0xFF, 0xFF};
+static void uart_lcd_page2(void)
+{
+    uart_lcd_state.page_num = 1;
+    dma_usart_send(&huart4, uart_lcd_data4, ARRAY_LEN(uart_lcd_data4));
+}
 /**
  * @brief 通过UART向LCD屏幕绘制IP地址
  *
@@ -96,3 +108,133 @@ void uart_lcd_channel_switch(uint8_t channel)
         break;
     }
 }
+
+void uart_lcd_page_switch(uint8_t page)
+{
+
+    switch (page)
+    {
+    case 0:
+        uart_lcd_page1();
+        break;
+    case 1:
+        uart_lcd_page2();
+        break;
+    default:
+        uart_lcd_page1();
+        break;
+    }
+    // HAL_Delay(100);
+}
+void uart_lcd_ecll_control_current_out(void)
+{
+    if (ec11_data.confirm_key_flag == 0)
+    {
+    }
+    else if (ec11_data.confirm_key_flag == 1) // 确认按键确认电流输出
+    {
+        ec11_data.confirm_key_flag_last++;
+        if (ec11_data.confirm_key_flag_last > 2)
+        {
+            current_buff[0] = (float)uart_lcd_state.current_value[0];
+            current_buff[1] = (float)uart_lcd_state.current_value[1];
+            ec11_data.confirm_key_flag_last = 0;
+            ec11_data.confirm_key_flag = 0;
+        }
+    }
+    else if (ec11_data.confirm_key_flag == 2) // 切换通道按键确认状<E8AEA4>??
+    {
+        ec11_data.confirm_key_flag_last++;
+        if (ec11_data.confirm_key_flag_last > 2)
+        {
+            if (uart_lcd_state.key_state[0] == 1)
+            {
+                uart_lcd_state.key_state[0] = 0;
+                uart_lcd_state.key_state[1] = 1;
+                uart_lcd_state.key_state[2] = 0;
+            }
+            else if (uart_lcd_state.key_state[0] == 0)
+            {
+                uart_lcd_state.key_state[0] = 1;
+                uart_lcd_state.key_state[1] = 0;
+                uart_lcd_state.key_state[2] = 1;
+            }
+            ec11_data.confirm_key_flag_last = 0;
+            ec11_data.confirm_key_flag = 0;
+            uart_lcd_channel_switch(uart_lcd_state.key_state[0]);
+        }
+    }
+    else if (ec11_data.confirm_key_flag == 3) // 切换界面
+    {
+
+        if (uart_lcd_state.page_num == 0)
+        {
+            uart_lcd_state.page_num = 1;
+        }
+        else if (uart_lcd_state.page_num == 1)
+        {
+            uart_lcd_state.page_num = 0;
+        }
+        ec11_data.confirm_key_flag_last = 0;
+        ec11_data.confirm_key_flag = 0;
+        uart_lcd_page_switch(uart_lcd_state.page_num);
+    }
+}
+
+void uart_lcd_ec11_control_current(void)
+{
+    if (uart_lcd_state.page_num == 0) // 当前页面为电流调节页面时，才对EC11编码器进行计数处理
+    {
+        ec11_data.direction = __HAL_TIM_IS_TIM_COUNTING_DOWN(&htim1);
+        ec11_data.encode_num = (short)__HAL_TIM_GET_COUNTER(&htim1);
+
+        if ((ec11_data.direction == 0) && (ec11_data.encode_num > ec11_data.encode_num_last))
+        {
+            if (uart_lcd_state.key_state[0] == 0)
+            {
+                uart_lcd_state.current_value[0] += 1;
+                if (uart_lcd_state.current_value[0] > 20)
+                {
+                    uart_lcd_state.current_value[0] = 20;
+                }
+            }
+            else if (uart_lcd_state.key_state[0] == 1)
+            {
+                uart_lcd_state.current_value[1] += 1;
+                if (uart_lcd_state.current_value[1] > 20)
+                {
+                    uart_lcd_state.current_value[1] = 20;
+                }
+            }
+            uart_lcd_current_out(uart_lcd_state.key_state[0]);
+        }
+        if ((ec11_data.direction == 1) && (ec11_data.encode_num < ec11_data.encode_num_last))
+        {
+            if (uart_lcd_state.key_state[0] == 0)
+            {
+                if (uart_lcd_state.current_value[0] < 2)
+                {
+                    uart_lcd_state.current_value[0] = 0;
+                }
+                else
+                {
+                    uart_lcd_state.current_value[0] -= 1;
+                }
+            }
+            else if (uart_lcd_state.key_state[0] == 1)
+            {
+                if (uart_lcd_state.current_value[1] < 2)
+                {
+                    uart_lcd_state.current_value[1] = 0;
+                }
+                else
+                {
+                    uart_lcd_state.current_value[1] -= 1;
+                }
+            }
+            uart_lcd_current_out(uart_lcd_state.key_state[0]);
+        }
+
+        ec11_data.encode_num_last = ec11_data.encode_num;
+    }
+}

User/driver/uart_lcd.h

@@ -1,3 +1,11 @@
+/*
+ * @Author: wangxujie wangxujie@wuxismart.com
+ * @Date: 2025-03-10 15:05:20
+ * @LastEditors: wangxujie wangxujie@wuxismart.com
+ * @LastEditTime: 2025-07-28 16:17:11
+ * @FilePath: \signal_generator\User\driver\uart_lcd.h
+ * @Description: 这是默认设置,请设置`customMade`, 打开koroFileHeader查看配置 进行设置: https://github.com/OBKoro1/koro1FileHeader/wiki/%E9%85%8D%E7%BD%AE
+ */
 #ifndef __UART_LCD_H__
 #define __UART_LCD_H__
 
@@ -25,4 +33,7 @@ void uart_lcd_draw_ipaddr(void);
 void uart_lcd_init(void);
 void uart_lcd_current_out(uint8_t channel);
 void uart_lcd_channel_switch(uint8_t channel);
+void uart_lcd_page_switch(uint8_t page);
+void uart_lcd_ecll_control_current_out(void);
+void uart_lcd_ec11_control_current(void);
 #endif