signal_generator/LWIP/App/lwip.c

/* USER CODE BEGIN Header */
/**
 ******************************************************************************
 * File Name          : LWIP.c
 * @file lwip.c
 *                      middleWare.
 ******************************************************************************
 * @attention
 *
 * Copyright (c) 2024 STMicroelectronics.
 * All rights reserved.
 *
 * This software is licensed under terms that can be found in the LICENSE file
 * in the root directory of this software component.
 * If no LICENSE file comes with this software, it is provided AS-IS.
 *
 ******************************************************************************
 */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "lwip.h"
#include "lwip/init.h"
#include "lwip/netif.h"
#if defined(__CC_ARM) /* MDK ARM Compiler */
#include "lwip/sio.h"
#endif /* MDK ARM Compiler */
#include "ethernetif.h"

/* USER CODE BEGIN 0 */
#include "user_flash.h"
/* USER CODE END 0 */
/* Private function prototypes -----------------------------------------------*/
static void ethernet_link_status_updated(struct netif *netif);
/* ETH Variables initialization ----------------------------------------------*/
void Error_Handler(void);

/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/* Variables Initialization */
struct netif gnetif;
ip4_addr_t ipaddr;
ip4_addr_t netmask;
ip4_addr_t gw;
uint8_t IP_ADDRESS[4];
uint8_t NETMASK_ADDRESS[4];
uint8_t GATEWAY_ADDRESS[4];

/* USER CODE BEGIN 2 */

/* USER CODE END 2 */

/**
 * LwIP initialization function
 */
void MX_LWIP_Init(void)
{
  /* IP addresses initialization */
  IP_ADDRESS[0] = 192;
  IP_ADDRESS[1] = 168;
  IP_ADDRESS[2] = 1;
  IP_ADDRESS[3] = 100;
  NETMASK_ADDRESS[0] = 255;
  NETMASK_ADDRESS[1] = 255;
  NETMASK_ADDRESS[2] = 255;
  NETMASK_ADDRESS[3] = 0;
  GATEWAY_ADDRESS[0] = 192;
  GATEWAY_ADDRESS[1] = 168;
  GATEWAY_ADDRESS[2] = 1;
  GATEWAY_ADDRESS[3] = 29;

  /* USER CODE BEGIN IP_ADDRESSES */
  /* USER CODE END IP_ADDRESSES */

  /* Initilialize the LwIP stack with RTOS */
  tcpip_init(NULL, NULL);

  /* IP addresses initialization without DHCP (IPv4) */
  IP4_ADDR(&ipaddr, IP_ADDRESS[0], IP_ADDRESS[1], IP_ADDRESS[2], IP_ADDRESS[3]);
  IP4_ADDR(&netmask, NETMASK_ADDRESS[0], NETMASK_ADDRESS[1], NETMASK_ADDRESS[2], NETMASK_ADDRESS[3]);
  IP4_ADDR(&gw, GATEWAY_ADDRESS[0], GATEWAY_ADDRESS[1], GATEWAY_ADDRESS[2], GATEWAY_ADDRESS[3]);

  /* add the network interface (IPv4/IPv6) with RTOS */
  netif_add(&gnetif, &ipaddr, &netmask, &gw, NULL, &ethernetif_init, &tcpip_input);

  /* Registers the default network interface */
  netif_set_default(&gnetif);

  if (netif_is_link_up(&gnetif))
  {
    /* When the netif is fully configured this function must be called */
    netif_set_up(&gnetif);
  }
  else
  {
    /* When the netif link is down this function must be called */
    netif_set_down(&gnetif);
  }

  /* Set the link callback function, this function is called on change of link status*/
  netif_set_link_callback(&gnetif, ethernet_link_status_updated);

  /* Create the Ethernet link handler thread */
  /* USER CODE BEGIN H7_OS_THREAD_DEF_CREATE_CMSIS_RTOS_V1 */
  osThreadDef(EthLink, ethernet_link_thread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE * 2);
  osThreadCreate(osThread(EthLink), &gnetif);
  /* USER CODE END H7_OS_THREAD_DEF_CREATE_CMSIS_RTOS_V1 */

  /* USER CODE BEGIN 3 */
  flash_read_data(FLASH_USER_START_ADDR, IP_ADDRESS, 4);
  if (IP_ADDRESS[0] == 192)
  {
    IP4_ADDR(&ipaddr, IP_ADDRESS[0], IP_ADDRESS[1], IP_ADDRESS[2], IP_ADDRESS[3]);
    gnetif.ip_addr = ipaddr;
  }
  /* USER CODE END 3 */
}

#ifdef USE_OBSOLETE_USER_CODE_SECTION_4
/* Kept to help code migration. (See new 4_1, 4_2... sections) */
/* Avoid to use this user section which will become obsolete. */
/* USER CODE BEGIN 4 */
/* USER CODE END 4 */
#endif

/**
 * @brief  Notify the User about the network interface config status
 * @param  netif: the network interface
 * @retval None
 */
static void ethernet_link_status_updated(struct netif *netif)
{
  if (netif_is_up(netif))
  {
    /* USER CODE BEGIN 5 */
    /* USER CODE END 5 */
  }
  else /* netif is down */
  {
    /* USER CODE BEGIN 6 */
    /* USER CODE END 6 */
  }
}

#if defined(__CC_ARM) /* MDK ARM Compiler */
/**
 * Opens a serial device for communication.
 *
 * @param devnum device number
 * @return handle to serial device if successful, NULL otherwise
 */
sio_fd_t sio_open(u8_t devnum)
{
  sio_fd_t sd;

  /* USER CODE BEGIN 7 */
  sd = 0; // dummy code
          /* USER CODE END 7 */

  return sd;
}

/**
 * Sends a single character to the serial device.
 *
 * @param c character to send
 * @param fd serial device handle
 *
 * @note This function will block until the character can be sent.
 */
void sio_send(u8_t c, sio_fd_t fd)
{
  /* USER CODE BEGIN 8 */
  /* USER CODE END 8 */
}

/**
 * Reads from the serial device.
 *
 * @param fd serial device handle
 * @param data pointer to data buffer for receiving
 * @param len maximum length (in bytes) of data to receive
 * @return number of bytes actually received - may be 0 if aborted by sio_read_abort
 *
 * @note This function will block until data can be received. The blocking
 * can be cancelled by calling sio_read_abort().
 */
u32_t sio_read(sio_fd_t fd, u8_t *data, u32_t len)
{
  u32_t recved_bytes;

  /* USER CODE BEGIN 9 */
  recved_bytes = 0; // dummy code
                    /* USER CODE END 9 */
  return recved_bytes;
}

/**
 * Tries to read from the serial device. Same as sio_read but returns
 * immediately if no data is available and never blocks.
 *
 * @param fd serial device handle
 * @param data pointer to data buffer for receiving
 * @param len maximum length (in bytes) of data to receive
 * @return number of bytes actually received
 */
u32_t sio_tryread(sio_fd_t fd, u8_t *data, u32_t len)
{
  u32_t recved_bytes;

  /* USER CODE BEGIN 10 */
  recved_bytes = 0; // dummy code
                    /* USER CODE END 10 */
  return recved_bytes;
}
#endif /* MDK ARM Compiler */