#include "unity.h"
#include "eeprom_m95.h"

void setUp(void)
{
    // Set up code here
}

void tearDown(void)
{
    // Tear down code here
}

void test_eeprom_m95_read(void)
{
    // Test case for eeprom_m95_read function
    m95_number_e num = M95_1;
    uint32_t read_addr = 0x0000;
    uint8_t data[10];
    uint16_t length = 10;

    // Perform the read operation
    eeprom_m95_read(num, read_addr, data, length);

    // Add assertions here to verify the correctness of the read operation
    TEST_ASSERT_EQUAL_HEX8_ARRAY(expected_data, data, length);
}

void test_eeprom_m95_write(void)
{
    // Test case for eeprom_m95_write function
    m95_number_e num = M95_1;
    uint32_t write_addr = 0x0000;
    uint8_t data[10] = {0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF, 0x11, 0x22, 0x33, 0x44};
    uint16_t length = 10;

    // Perform the write operation
    eeprom_m95_write(num, write_addr, data, length);

    // Add assertions here to verify the correctness of the write operation
    // You can perform a subsequent read operation to verify the written data
}

void test_eeprom_m95_enable(void)
{
    // Test case for eeprom_m95_enable function
    // Perform the enable operation
    eeprom_m95_enable();

    // Add assertions here to verify the correctness of the enable operation
    // You can check the status of the M95 EEPROM to ensure it is enabled
}

void test_eeprom_m95_disable(void)
{
    // Test case for eeprom_m95_disable function
    // Perform the disable operation
    eeprom_m95_disable();

    // Add assertions here to verify the correctness of the disable operation
    // You can check the status of the M95 EEPROM to ensure it is disabled
}

void test_eeprom_m95_init(void)
{
    // Test case for eeprom_m95_init function
    m95_number_e num = M95_1;

    // Perform the initialization
    eeprom_m95_init(num);

    // Add assertions here to verify the correctness of the initialization
    // You can check the values of the initialized variables and perform any necessary checks
}

void test_eeprom_m95_dinit(void)
{
    // Test case for eeprom_m95_dinit function
    m95_number_e num = M95_1;

    // Perform the deinitialization
    eeprom_m95_dinit(num);

    // Add assertions here to verify the correctness of the deinitialization
    // You can check the status of the M95 EEPROM to ensure it is properly deinitialized
}

void test_eeprom_m95_test(void)
{
    // Test case for eeprom_m95_test function
    m95_number_e num = M95_1;

    // Perform the test
    eeprom_m95_test(num);

    // Add assertions here to verify the correctness of the test
    // You can check the results of the test and perform any necessary checks
}

int main(void)
{
    UNITY_BEGIN();

    RUN_TEST(test_eeprom_m95_read);
    RUN_TEST(test_eeprom_m95_write);
    RUN_TEST(test_eeprom_m95_enable);
    RUN_TEST(test_eeprom_m95_disable);
    RUN_TEST(test_eeprom_m95_init);
    RUN_TEST(test_eeprom_m95_dinit);
    RUN_TEST(test_eeprom_m95_test);

    return UNITY_END();
}