361 lines
12 KiB
C
361 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l0xx_hal_adc_ex.c
|
|
* @author MCD Application Team
|
|
* @brief This file provides firmware functions to manage the following
|
|
* functionalities of the Analog to Digital Convertor (ADC)
|
|
* peripheral:
|
|
* + Peripheral Control functions
|
|
* Other functions (generic functions) are available in file
|
|
* "stm32l0xx_hal_adc.c".
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@verbatim
|
|
[..]
|
|
(@) Sections "ADC peripheral features" and "How to use this driver" are
|
|
available in file of generic functions "stm32l0xx_hal_adc.c".
|
|
[..]
|
|
@endverbatim
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l0xx_hal.h"
|
|
|
|
/** @addtogroup STM32L0xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup ADCEx ADCEx
|
|
* @brief ADC Extended HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_ADC_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
|
|
/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/* Fixed timeout values for ADC calibration, enable settling time, disable */
|
|
/* settling time. */
|
|
/* Values defined to be higher than worst cases: low clock frequency, */
|
|
/* maximum prescaler. */
|
|
/* Unit: ms */
|
|
#define ADC_CALIBRATION_TIMEOUT 10U
|
|
|
|
/* Delay for VREFINT stabilization time. */
|
|
/* Internal reference startup time max value is 3ms (refer to device datasheet, parameter TVREFINT). */
|
|
/* Unit: ms */
|
|
#define SYSCFG_BUF_VREFINT_ENABLE_TIMEOUT (3U)
|
|
|
|
/* Delay for TEMPSENSOR stabilization time. */
|
|
/* Temperature sensor startup time max value is 10us (refer to device datasheet, parameter tSTART). */
|
|
/* Unit: ms */
|
|
#define SYSCFG_BUF_TEMPSENSOR_ENABLE_TIMEOUT (1U)
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions
|
|
* @brief Extended IO operation functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Perform the ADC calibration.
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Perform an ADC automatic self-calibration
|
|
* Calibration prerequisite: ADC must be disabled (execute this
|
|
* function before HAL_ADC_Start() or after HAL_ADC_Stop() ).
|
|
* @note Calibration factor can be read after calibration, using function
|
|
* HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]).
|
|
* @param hadc ADC handle
|
|
* @param SingleDiff Selection of single-ended or differential input
|
|
* This parameter can be only of the following values:
|
|
* @arg ADC_SINGLE_ENDED: Channel in mode input single ended
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff)
|
|
{
|
|
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t backup_setting_adc_dma_transfer = 0U; /* Note: Variable not declared as volatile because register read is already declared as volatile */
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hadc);
|
|
|
|
/* Calibration prerequisite: ADC must be disabled. */
|
|
if (ADC_IS_ENABLE(hadc) == RESET)
|
|
{
|
|
/* Set ADC state */
|
|
ADC_STATE_CLR_SET(hadc->State,
|
|
HAL_ADC_STATE_REG_BUSY,
|
|
HAL_ADC_STATE_BUSY_INTERNAL);
|
|
|
|
/* Disable ADC DMA transfer request during calibration */
|
|
/* Note: Specificity of this STM32 series: Calibration factor is */
|
|
/* available in data register and also transferred by DMA. */
|
|
/* To not insert ADC calibration factor among ADC conversion data */
|
|
/* in array variable, DMA transfer must be disabled during */
|
|
/* calibration. */
|
|
backup_setting_adc_dma_transfer = READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG);
|
|
CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG);
|
|
|
|
/* Start ADC calibration */
|
|
hadc->Instance->CR |= ADC_CR_ADCAL;
|
|
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait for calibration completion */
|
|
while (HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADCAL))
|
|
{
|
|
if ((HAL_GetTick() - tickstart) > ADC_CALIBRATION_TIMEOUT)
|
|
{
|
|
/* New check to avoid false timeout detection in case of preemption */
|
|
if (HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADCAL))
|
|
{
|
|
/* Update ADC state machine to error */
|
|
ADC_STATE_CLR_SET(hadc->State,
|
|
HAL_ADC_STATE_BUSY_INTERNAL,
|
|
HAL_ADC_STATE_ERROR_INTERNAL);
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hadc);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Restore ADC DMA transfer request after calibration */
|
|
SET_BIT(hadc->Instance->CFGR1, backup_setting_adc_dma_transfer);
|
|
|
|
/* Set ADC state */
|
|
ADC_STATE_CLR_SET(hadc->State,
|
|
HAL_ADC_STATE_BUSY_INTERNAL,
|
|
HAL_ADC_STATE_READY);
|
|
}
|
|
else
|
|
{
|
|
/* Update ADC state machine to error */
|
|
SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
|
|
|
|
tmp_hal_status = HAL_ERROR;
|
|
}
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hadc);
|
|
|
|
/* Return function status */
|
|
return tmp_hal_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the calibration factor.
|
|
* @param hadc ADC handle.
|
|
* @param SingleDiff This parameter can be only:
|
|
* @arg ADC_SINGLE_ENDED: Channel in mode input single ended.
|
|
* @retval Calibration value.
|
|
*/
|
|
uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
|
|
assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff));
|
|
|
|
/* Return the ADC calibration value */
|
|
return ((hadc->Instance->CALFACT) & 0x0000007FU);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the calibration factor to overwrite automatic conversion result.
|
|
* ADC must be enabled and no conversion is ongoing.
|
|
* @param hadc ADC handle
|
|
* @param SingleDiff This parameter can be only:
|
|
* @arg ADC_SINGLE_ENDED: Channel in mode input single ended.
|
|
* @param CalibrationFactor Calibration factor (coded on 7 bits maximum)
|
|
* @retval HAL state
|
|
*/
|
|
HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor)
|
|
{
|
|
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
|
|
assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff));
|
|
assert_param(IS_ADC_CALFACT(CalibrationFactor));
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hadc);
|
|
|
|
/* Verification of hardware constraints before modifying the calibration */
|
|
/* factors register: ADC must be enabled, no conversion on going. */
|
|
if ((ADC_IS_ENABLE(hadc) != RESET) &&
|
|
(ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET))
|
|
{
|
|
/* Set the selected ADC calibration value */
|
|
hadc->Instance->CALFACT &= ~ADC_CALFACT_CALFACT;
|
|
hadc->Instance->CALFACT |= CalibrationFactor;
|
|
}
|
|
else
|
|
{
|
|
/* Update ADC state machine to error */
|
|
SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
|
|
/* Update ADC state machine to error */
|
|
SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
|
|
|
|
/* Update ADC state machine to error */
|
|
tmp_hal_status = HAL_ERROR;
|
|
}
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hadc);
|
|
|
|
/* Return function status */
|
|
return tmp_hal_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the buffer of Vrefint for the ADC, required when device is in mode low-power (low-power run, low-power sleep or stop mode)
|
|
* This function must be called before function HAL_ADC_Init()
|
|
* (in case of previous ADC operations: function HAL_ADC_DeInit() must be called first)
|
|
* For more details on procedure and buffer current consumption, refer to device reference manual.
|
|
* @note This is functional only if the LOCK is not set.
|
|
* @note This API is obsolete. This configuration is done in HAL_ADC_ConfigChannel().
|
|
* @retval None
|
|
*/
|
|
HAL_StatusTypeDef HAL_ADCEx_EnableVREFINT(void)
|
|
{
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Enable the Buffer for the ADC by setting ENBUF_SENSOR_ADC bit in the CFGR3 register */
|
|
SET_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_ENBUF_VREFINT_ADC);
|
|
|
|
/* Wait for Vrefint buffer effectively enabled */
|
|
/* Get tick count */
|
|
tickstart = HAL_GetTick();
|
|
|
|
while (HAL_IS_BIT_CLR(SYSCFG->CFGR3, SYSCFG_CFGR3_VREFINT_RDYF))
|
|
{
|
|
if ((HAL_GetTick() - tickstart) > SYSCFG_BUF_VREFINT_ENABLE_TIMEOUT)
|
|
{
|
|
/* New check to avoid false timeout detection in case of preemption */
|
|
if (HAL_IS_BIT_CLR(SYSCFG->CFGR3, SYSCFG_CFGR3_VREFINT_RDYF))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the Buffer Vrefint for the ADC.
|
|
* @note This is functional only if the LOCK is not set.
|
|
* @note This API is obsolete. This configuration is done in HAL_ADC_ConfigChannel().
|
|
* @retval None
|
|
*/
|
|
void HAL_ADCEx_DisableVREFINT(void)
|
|
{
|
|
/* Disable the Vrefint by resetting ENBUF_SENSOR_ADC bit in the CFGR3 register */
|
|
CLEAR_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_ENBUF_VREFINT_ADC);
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the buffer of temperature sensor for the ADC, required when device is in mode low-power (low-power run, low-power sleep or stop mode)
|
|
* This function must be called before function HAL_ADC_Init()
|
|
* (in case of previous ADC operations: function HAL_ADC_DeInit() must be called first)
|
|
* For more details on procedure and buffer current consumption, refer to device reference manual.
|
|
* @note This is functional only if the LOCK is not set.
|
|
* @note This API is obsolete. This configuration is done in HAL_ADC_ConfigChannel().
|
|
* @retval None
|
|
*/
|
|
HAL_StatusTypeDef HAL_ADCEx_EnableVREFINTTempSensor(void)
|
|
{
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Enable the Buffer for the ADC by setting ENBUF_SENSOR_ADC bit in the CFGR3 register */
|
|
SET_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_ENBUF_SENSOR_ADC);
|
|
|
|
/* Wait for Vrefint buffer effectively enabled */
|
|
/* Get tick count */
|
|
tickstart = HAL_GetTick();
|
|
|
|
while (HAL_IS_BIT_CLR(SYSCFG->CFGR3, SYSCFG_CFGR3_VREFINT_RDYF))
|
|
{
|
|
if ((HAL_GetTick() - tickstart) > SYSCFG_BUF_TEMPSENSOR_ENABLE_TIMEOUT)
|
|
{
|
|
/* New check to avoid false timeout detection in case of preemption */
|
|
if (HAL_IS_BIT_CLR(SYSCFG->CFGR3, SYSCFG_CFGR3_VREFINT_RDYF))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the VREFINT and Sensor for the ADC.
|
|
* @note This is functional only if the LOCK is not set.
|
|
* @note This API is obsolete. This configuration is done in HAL_ADC_ConfigChannel().
|
|
* @retval None
|
|
*/
|
|
void HAL_ADCEx_DisableVREFINTTempSensor(void)
|
|
{
|
|
/* Disable the Vrefint by resetting ENBUF_SENSOR_ADC bit in the CFGR3 register */
|
|
CLEAR_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_ENBUF_SENSOR_ADC);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|