diff --git a/.mxproject b/.mxproject index a7beff9..e61285e 100644 --- a/.mxproject +++ b/.mxproject @@ -1,29 +1,27 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_system.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_usart.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_bus.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_utils.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_rcc.h;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_gpio.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_dma.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_pwr.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_exti.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_usart.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_rcc.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_utils.c;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_system.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_usart.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_bus.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_utils.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_rcc.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f103xb.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f1xx.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\system_stm32f1xx.h;Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_system.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_tim.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_bus.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_rcc.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_utils.h;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_gpio.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_pwr.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_exti.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_tim.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_dma.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_rcc.c;Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_utils.c;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_gpio.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_pwr.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_system.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_exti.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_tim.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_dma.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_bus.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_cortex.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_rcc.h;Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_ll_utils.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f103xb.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f1xx.h;Drivers\CMSIS\Device\ST\STM32F1xx\Include\system_stm32f1xx.h;Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedKeilFiles] -SourceFiles=..\Core\Src\main.c;..\Core\Src\gpio.c;..\Core\Src\dma.c;..\Core\Src\usart.c;..\Core\Src\stm32f1xx_it.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_gpio.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_dma.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_pwr.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_exti.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_usart.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_rcc.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_utils.c;..\Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;..\Core\Src\system_stm32f1xx.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_gpio.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_dma.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_pwr.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_exti.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_usart.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_rcc.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_utils.c;..\Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;..\Core\Src\system_stm32f1xx.c;;; +SourceFiles=..\Core\Src\main.c;..\Core\Src\gpio.c;..\Core\Src\tim.c;..\Core\Src\stm32f1xx_it.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_gpio.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_pwr.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_exti.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_tim.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_dma.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_rcc.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_utils.c;..\Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;..\Core\Src\system_stm32f1xx.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_gpio.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_pwr.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_exti.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_tim.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_dma.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_rcc.c;..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_utils.c;..\Drivers\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c;..\Core\Src\system_stm32f1xx.c;;; HeaderPath=..\Drivers\STM32F1xx_HAL_Driver\Inc;..\Drivers\CMSIS\Device\ST\STM32F1xx\Include;..\Drivers\CMSIS\Include;..\Core\Inc; CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;HSI_VALUE:8000000;LSI_VALUE:40000;VDD_VALUE:3300;PREFETCH_ENABLE:1;STM32F103xB;USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;HSI_VALUE:8000000;LSI_VALUE:40000;VDD_VALUE:3300;PREFETCH_ENABLE:1; [PreviousGenFiles] AdvancedFolderStructure=true -HeaderFileListSize=6 +HeaderFileListSize=5 HeaderFiles#0=..\Core\Inc\gpio.h -HeaderFiles#1=..\Core\Inc\dma.h -HeaderFiles#2=..\Core\Inc\usart.h -HeaderFiles#3=..\Core\Inc\stm32f1xx_it.h -HeaderFiles#4=..\Core\Inc\stm32_assert.h -HeaderFiles#5=..\Core\Inc\main.h +HeaderFiles#1=..\Core\Inc\tim.h +HeaderFiles#2=..\Core\Inc\stm32f1xx_it.h +HeaderFiles#3=..\Core\Inc\stm32_assert.h +HeaderFiles#4=..\Core\Inc\main.h HeaderFolderListSize=1 HeaderPath#0=..\Core\Inc HeaderFiles=; -SourceFileListSize=5 +SourceFileListSize=4 SourceFiles#0=..\Core\Src\gpio.c -SourceFiles#1=..\Core\Src\dma.c -SourceFiles#2=..\Core\Src\usart.c -SourceFiles#3=..\Core\Src\stm32f1xx_it.c -SourceFiles#4=..\Core\Src\main.c +SourceFiles#1=..\Core\Src\tim.c +SourceFiles#2=..\Core\Src\stm32f1xx_it.c +SourceFiles#3=..\Core\Src\main.c SourceFolderListSize=1 SourcePath#0=..\Core\Src SourceFiles=; diff --git a/Core/Inc/dma.h b/Core/Inc/dma.h deleted file mode 100644 index f3b1a09..0000000 --- a/Core/Inc/dma.h +++ /dev/null @@ -1,52 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file dma.h - * @brief This file contains all the function prototypes for - * the dma.c file - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __DMA_H__ -#define __DMA_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* DMA memory to memory transfer handles -------------------------------------*/ - -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -void MX_DMA_Init(void); - -/* USER CODE BEGIN Prototypes */ - -/* USER CODE END Prototypes */ - -#ifdef __cplusplus -} -#endif - -#endif /* __DMA_H__ */ - diff --git a/Core/Inc/main.h b/Core/Inc/main.h index 5a9f639..b65bbf3 100644 --- a/Core/Inc/main.h +++ b/Core/Inc/main.h @@ -23,13 +23,11 @@ #define __MAIN_H #ifdef __cplusplus -extern "C" -{ +extern "C" { #endif - /* Includes ------------------------------------------------------------------*/ +/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_ll_dma.h" #include "stm32f1xx_ll_rcc.h" #include "stm32f1xx_ll_bus.h" #include "stm32f1xx_ll_system.h" @@ -37,38 +35,39 @@ extern "C" #include "stm32f1xx_ll_cortex.h" #include "stm32f1xx_ll_utils.h" #include "stm32f1xx_ll_pwr.h" -#include "stm32f1xx_ll_usart.h" +#include "stm32f1xx_ll_dma.h" +#include "stm32f1xx_ll_tim.h" #include "stm32f1xx_ll_gpio.h" #if defined(USE_FULL_ASSERT) #include "stm32_assert.h" #endif /* USE_FULL_ASSERT */ - /* Private includes ----------------------------------------------------------*/ - /* USER CODE BEGIN Includes */ +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ #include "lib.h" #include "bsp.h" - /* USER CODE END Includes */ +/* USER CODE END Includes */ - /* Exported types ------------------------------------------------------------*/ - /* USER CODE BEGIN ET */ +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ - /* USER CODE END ET */ +/* USER CODE END ET */ - /* Exported constants --------------------------------------------------------*/ - /* USER CODE BEGIN EC */ +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ - /* USER CODE END EC */ +/* USER CODE END EC */ - /* Exported macro ------------------------------------------------------------*/ - /* USER CODE BEGIN EM */ +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ - /* USER CODE END EM */ +/* USER CODE END EM */ - /* Exported functions prototypes ---------------------------------------------*/ - void Error_Handler(void); +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); /* USER CODE BEGIN EFP */ @@ -82,21 +81,21 @@ extern "C" #define OLDE_SCK_Pin LL_GPIO_PIN_13 #define OLDE_SCK_GPIO_Port GPIOB #ifndef NVIC_PRIORITYGROUP_0 -#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority, \ - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority, \ - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority, \ - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority, \ - 1 bit for subpriority */ -#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority, \ - 0 bit for subpriority */ +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority, + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority, + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority, + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority, + 1 bit for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority, + 0 bit for subpriority */ #endif - /* USER CODE BEGIN Private defines */ +/* USER CODE BEGIN Private defines */ - /* USER CODE END Private defines */ +/* USER CODE END Private defines */ #ifdef __cplusplus } diff --git a/Core/Inc/stm32f1xx_it.h b/Core/Inc/stm32f1xx_it.h index f63c4d9..4e9f758 100644 --- a/Core/Inc/stm32f1xx_it.h +++ b/Core/Inc/stm32f1xx_it.h @@ -55,10 +55,7 @@ void SVC_Handler(void); void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); -void PVD_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void USART1_IRQHandler(void); +void TIM2_IRQHandler(void); /* USER CODE BEGIN EFP */ /* USER CODE END EFP */ diff --git a/Core/Inc/usart.h b/Core/Inc/tim.h similarity index 88% rename from Core/Inc/usart.h rename to Core/Inc/tim.h index 3fc152e..23a1d2c 100644 --- a/Core/Inc/usart.h +++ b/Core/Inc/tim.h @@ -1,9 +1,9 @@ /* USER CODE BEGIN Header */ /** ****************************************************************************** - * @file usart.h + * @file tim.h * @brief This file contains all the function prototypes for - * the usart.c file + * the tim.c file ****************************************************************************** * @attention * @@ -18,8 +18,8 @@ */ /* USER CODE END Header */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USART_H__ -#define __USART_H__ +#ifndef __TIM_H__ +#define __TIM_H__ #ifdef __cplusplus extern "C" { @@ -36,7 +36,7 @@ extern "C" { /* USER CODE END Private defines */ -void MX_USART1_UART_Init(void); +void MX_TIM2_Init(void); /* USER CODE BEGIN Prototypes */ @@ -46,5 +46,5 @@ void MX_USART1_UART_Init(void); } #endif -#endif /* __USART_H__ */ +#endif /* __TIM_H__ */ diff --git a/Core/Src/dma.c b/Core/Src/dma.c deleted file mode 100644 index fc35945..0000000 --- a/Core/Src/dma.c +++ /dev/null @@ -1,59 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file dma.c - * @brief This file provides code for the configuration - * of all the requested memory to memory DMA transfers. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "dma.h" - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/*----------------------------------------------------------------------------*/ -/* Configure DMA */ -/*----------------------------------------------------------------------------*/ - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/** - * Enable DMA controller clock - */ -void MX_DMA_Init(void) -{ - - /* Init with LL driver */ - /* DMA controller clock enable */ - LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1); - - /* DMA interrupt init */ - /* DMA1_Channel4_IRQn interrupt configuration */ - NVIC_SetPriority(DMA1_Channel4_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); - NVIC_EnableIRQ(DMA1_Channel4_IRQn); - /* DMA1_Channel5_IRQn interrupt configuration */ - NVIC_SetPriority(DMA1_Channel5_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); - NVIC_EnableIRQ(DMA1_Channel5_IRQn); - -} - -/* USER CODE BEGIN 2 */ - -/* USER CODE END 2 */ - diff --git a/Core/Src/gpio.c b/Core/Src/gpio.c index 863da5b..d2c5251 100644 --- a/Core/Src/gpio.c +++ b/Core/Src/gpio.c @@ -73,7 +73,8 @@ void MX_GPIO_Init(void) /**/ GPIO_InitStruct.Pin = LL_GPIO_PIN_0|LL_GPIO_PIN_1|LL_GPIO_PIN_2|LL_GPIO_PIN_3 |LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7 - |LL_GPIO_PIN_8|LL_GPIO_PIN_11|LL_GPIO_PIN_12|LL_GPIO_PIN_15; + |LL_GPIO_PIN_8|LL_GPIO_PIN_9|LL_GPIO_PIN_10|LL_GPIO_PIN_11 + |LL_GPIO_PIN_12|LL_GPIO_PIN_15; GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG; LL_GPIO_Init(GPIOA, &GPIO_InitStruct); diff --git a/Core/Src/main.c b/Core/Src/main.c index 3e6d19d..10fcf91 100644 --- a/Core/Src/main.c +++ b/Core/Src/main.c @@ -18,8 +18,7 @@ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" -#include "dma.h" -#include "usart.h" +#include "tim.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ @@ -61,9 +60,9 @@ void SystemClock_Config(void); /* USER CODE END 0 */ /** - * @brief The application entry point. - * @retval int - */ + * @brief The application entry point. + * @retval int + */ int main(void) { /* USER CODE BEGIN 1 */ @@ -79,13 +78,8 @@ int main(void) /* System interrupt init*/ NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - /* Peripheral interrupt init*/ - /* PVD_IRQn interrupt configuration */ - NVIC_SetPriority(PVD_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 0, 0)); - NVIC_EnableIRQ(PVD_IRQn); - /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled - */ + */ LL_GPIO_AF_Remap_SWJ_NOJTAG(); /* USER CODE BEGIN Init */ @@ -101,8 +95,7 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); - MX_DMA_Init(); - MX_USART1_UART_Init(); + MX_TIM2_Init(); /* USER CODE BEGIN 2 */ my_mem_init(SRAMIN); // Initialize internal memory pool 1 board_init(); @@ -122,36 +115,39 @@ int main(void) } /** - * @brief System Clock Configuration - * @retval None - */ + * @brief System Clock Configuration + * @retval None + */ void SystemClock_Config(void) { LL_FLASH_SetLatency(LL_FLASH_LATENCY_2); - while (LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2) + while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_2) { } LL_RCC_HSE_Enable(); - /* Wait till HSE is ready */ - while (LL_RCC_HSE_IsReady() != 1) + /* Wait till HSE is ready */ + while(LL_RCC_HSE_IsReady() != 1) { + } LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9); LL_RCC_PLL_Enable(); - /* Wait till PLL is ready */ - while (LL_RCC_PLL_IsReady() != 1) + /* Wait till PLL is ready */ + while(LL_RCC_PLL_IsReady() != 1) { + } LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1); LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2); LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1); LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); - /* Wait till System clock is ready */ - while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) + /* Wait till System clock is ready */ + while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) { + } LL_Init1msTick(72000000); LL_SetSystemCoreClock(72000000); @@ -162,9 +158,9 @@ void SystemClock_Config(void) /* USER CODE END 4 */ /** - * @brief This function is executed in case of error occurrence. - * @retval None - */ + * @brief This function is executed in case of error occurrence. + * @retval None + */ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler_Debug */ @@ -176,14 +172,14 @@ void Error_Handler(void) /* USER CODE END Error_Handler_Debug */ } -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT /** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ void assert_failed(uint8_t *file, uint32_t line) { /* USER CODE BEGIN 6 */ diff --git a/Core/Src/stm32f1xx_it.c b/Core/Src/stm32f1xx_it.c index 936368d..82fed9b 100644 --- a/Core/Src/stm32f1xx_it.c +++ b/Core/Src/stm32f1xx_it.c @@ -1,20 +1,20 @@ /* USER CODE BEGIN Header */ /** - ****************************************************************************** - * @file stm32f1xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ + ****************************************************************************** + * @file stm32f1xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ @@ -22,6 +22,9 @@ #include "stm32f1xx_it.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ +#include "sys.h" +#include "flow.h" +#include "board.h" /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ @@ -199,58 +202,21 @@ void SysTick_Handler(void) /******************************************************************************/ /** - * @brief This function handles PVD interrupt through EXTI line 16. + * @brief This function handles TIM2 global interrupt. */ -void PVD_IRQHandler(void) +void TIM2_IRQHandler(void) { - /* USER CODE BEGIN PVD_IRQn 0 */ + /* USER CODE BEGIN TIM2_IRQn 0 */ - /* USER CODE END PVD_IRQn 0 */ - - /* USER CODE BEGIN PVD_IRQn 1 */ - - /* USER CODE END PVD_IRQn 1 */ -} - -/** - * @brief This function handles DMA1 channel4 global interrupt. - */ -void DMA1_Channel4_IRQHandler(void) -{ - /* USER CODE BEGIN DMA1_Channel4_IRQn 0 */ - - /* USER CODE END DMA1_Channel4_IRQn 0 */ - - /* USER CODE BEGIN DMA1_Channel4_IRQn 1 */ - - /* USER CODE END DMA1_Channel4_IRQn 1 */ -} - -/** - * @brief This function handles DMA1 channel5 global interrupt. - */ -void DMA1_Channel5_IRQHandler(void) -{ - /* USER CODE BEGIN DMA1_Channel5_IRQn 0 */ - - /* USER CODE END DMA1_Channel5_IRQn 0 */ - - /* USER CODE BEGIN DMA1_Channel5_IRQn 1 */ - - /* USER CODE END DMA1_Channel5_IRQn 1 */ -} - -/** - * @brief This function handles USART1 global interrupt. - */ -void USART1_IRQHandler(void) -{ - /* USER CODE BEGIN USART1_IRQn 0 */ - - /* USER CODE END USART1_IRQn 0 */ - /* USER CODE BEGIN USART1_IRQn 1 */ - - /* USER CODE END USART1_IRQn 1 */ + /* USER CODE END TIM2_IRQn 0 */ + /* USER CODE BEGIN TIM2_IRQn 1 */ + if (IS_TIM_IT_FLAG(TASK_TIM)) + { + TIM_IRQ_HANDLER(TASK_TIM); + LL_IncTick(); + FLOW_TICK_UPDATE(); + } + /* USER CODE END TIM2_IRQn 1 */ } /* USER CODE BEGIN 1 */ diff --git a/Core/Src/tim.c b/Core/Src/tim.c new file mode 100644 index 0000000..c568223 --- /dev/null +++ b/Core/Src/tim.c @@ -0,0 +1,64 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file tim.c + * @brief This file provides code for the configuration + * of the TIM instances. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "tim.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* TIM2 init function */ +void MX_TIM2_Init(void) +{ + + /* USER CODE BEGIN TIM2_Init 0 */ + + /* USER CODE END TIM2_Init 0 */ + + LL_TIM_InitTypeDef TIM_InitStruct = {0}; + + /* Peripheral clock enable */ + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2); + + /* TIM2 interrupt Init */ + NVIC_SetPriority(TIM2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),15, 0)); + NVIC_EnableIRQ(TIM2_IRQn); + + /* USER CODE BEGIN TIM2_Init 1 */ + + /* USER CODE END TIM2_Init 1 */ + TIM_InitStruct.Prescaler = 7199; + TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct.Autoreload = 99; + TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; + LL_TIM_Init(TIM2, &TIM_InitStruct); + LL_TIM_DisableARRPreload(TIM2); + LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL); + LL_TIM_SetTriggerOutput(TIM2, LL_TIM_TRGO_RESET); + LL_TIM_DisableMasterSlaveMode(TIM2); + /* USER CODE BEGIN TIM2_Init 2 */ + + /* USER CODE END TIM2_Init 2 */ + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Core/Src/usart.c b/Core/Src/usart.c deleted file mode 100644 index e15ef4a..0000000 --- a/Core/Src/usart.c +++ /dev/null @@ -1,115 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file usart.c - * @brief This file provides code for the configuration - * of the USART instances. - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ -/* Includes ------------------------------------------------------------------*/ -#include "usart.h" - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* USART1 init function */ - -void MX_USART1_UART_Init(void) -{ - - /* USER CODE BEGIN USART1_Init 0 */ - - /* USER CODE END USART1_Init 0 */ - - LL_USART_InitTypeDef USART_InitStruct = {0}; - - LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; - - /* Peripheral clock enable */ - LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1); - - LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA); - /**USART1 GPIO Configuration - PA9 ------> USART1_TX - PA10 ------> USART1_RX - */ - GPIO_InitStruct.Pin = LL_GPIO_PIN_9; - GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; - GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; - LL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = LL_GPIO_PIN_10; - GPIO_InitStruct.Mode = LL_GPIO_MODE_FLOATING; - LL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USART1 DMA Init */ - - /* USART1_RX Init */ - LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_5, LL_DMA_DIRECTION_PERIPH_TO_MEMORY); - - LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_5, LL_DMA_PRIORITY_LOW); - - LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_5, LL_DMA_MODE_NORMAL); - - LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_5, LL_DMA_PERIPH_NOINCREMENT); - - LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_5, LL_DMA_MEMORY_INCREMENT); - - LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_5, LL_DMA_PDATAALIGN_BYTE); - - LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_5, LL_DMA_MDATAALIGN_BYTE); - - /* USART1_TX Init */ - LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_4, LL_DMA_DIRECTION_MEMORY_TO_PERIPH); - - LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PRIORITY_LOW); - - LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MODE_NORMAL); - - LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PERIPH_NOINCREMENT); - - LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MEMORY_INCREMENT); - - LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PDATAALIGN_BYTE); - - LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MDATAALIGN_BYTE); - - /* USART1 interrupt Init */ - NVIC_SetPriority(USART1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); - NVIC_EnableIRQ(USART1_IRQn); - - /* USER CODE BEGIN USART1_Init 1 */ - - /* USER CODE END USART1_Init 1 */ - USART_InitStruct.BaudRate = 115200; - USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; - USART_InitStruct.StopBits = LL_USART_STOPBITS_1; - USART_InitStruct.Parity = LL_USART_PARITY_NONE; - USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; - USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; - USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16; - LL_USART_Init(USART1, &USART_InitStruct); - LL_USART_ConfigAsyncMode(USART1); - LL_USART_Enable(USART1); - /* USER CODE BEGIN USART1_Init 2 */ - - /* USER CODE END USART1_Init 2 */ - -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ diff --git a/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h b/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h new file mode 100644 index 0000000..f1bceb7 --- /dev/null +++ b/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h @@ -0,0 +1,3890 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_TIM_H +#define __STM32F1xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U /* 6: TIMx_CH4 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U /* 6: OC4M, OC4FE, OC4PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U /* 6: CC4S, IC4PSC, IC4F */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U /* 6: CC4P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U /* 6: OIS4 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + + + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of + @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity + * @{ + */ +#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ +#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State + * @{ + */ +#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(const TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS1N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS1N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity) +{ + __IO uint32_t tmpreg; + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity); + /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 || TIM15 || TIM16 || TIM17 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_TIM_H */ diff --git a/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h b/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h deleted file mode 100644 index ffe4192..0000000 --- a/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h +++ /dev/null @@ -1,2569 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_ll_usart.h - * @author MCD Application Team - * @brief Header file of USART LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_LL_USART_H -#define __STM32F1xx_LL_USART_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx.h" - -/** @addtogroup STM32F1xx_LL_Driver - * @{ - */ - -#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) - -/** @defgroup USART_LL USART - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup USART_LL_Private_Constants USART Private Constants - * @{ - */ - -/* Defines used for the bit position in the register and perform offsets*/ -#define USART_POSITION_GTPR_GT USART_GTPR_GT_Pos -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup USART_LL_Private_Macros USART Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup USART_LL_ES_INIT USART Exported Init structures - * @{ - */ - -/** - * @brief LL USART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/ - - uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref USART_LL_EC_STOPBITS. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref USART_LL_EC_PARITY. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/ - - uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. - This parameter can be a value of @ref USART_LL_EC_DIRECTION. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/ - - uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. - This parameter can be a value of @ref USART_LL_EC_HWCONTROL. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/ - - uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. - This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. - - This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/ - -} LL_USART_InitTypeDef; - -/** - * @brief LL USART Clock Init Structure definition - */ -typedef struct -{ - uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. - This parameter can be a value of @ref USART_LL_EC_CLOCK. - - USART HW configuration can be modified afterwards using unitary functions - @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). - For more details, refer to description of this function. */ - - uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref USART_LL_EC_POLARITY. - - USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity(). - For more details, refer to description of this function. */ - - uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref USART_LL_EC_PHASE. - - USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase(). - For more details, refer to description of this function. */ - - uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. - - USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput(). - For more details, refer to description of this function. */ - -} LL_USART_ClockInitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup USART_LL_Exported_Constants USART Exported Constants - * @{ - */ - -/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_USART_ReadReg function - * @{ - */ -#define LL_USART_SR_PE USART_SR_PE /*!< Parity error flag */ -#define LL_USART_SR_FE USART_SR_FE /*!< Framing error flag */ -#define LL_USART_SR_NE USART_SR_NE /*!< Noise detected flag */ -#define LL_USART_SR_ORE USART_SR_ORE /*!< Overrun error flag */ -#define LL_USART_SR_IDLE USART_SR_IDLE /*!< Idle line detected flag */ -#define LL_USART_SR_RXNE USART_SR_RXNE /*!< Read data register not empty flag */ -#define LL_USART_SR_TC USART_SR_TC /*!< Transmission complete flag */ -#define LL_USART_SR_TXE USART_SR_TXE /*!< Transmit data register empty flag */ -#define LL_USART_SR_LBD USART_SR_LBD /*!< LIN break detection flag */ -#define LL_USART_SR_CTS USART_SR_CTS /*!< CTS flag */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions - * @{ - */ -#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ -#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ -#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ -#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ -#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ -#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ -#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ -#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_DIRECTION Communication Direction - * @{ - */ -#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ -#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ -#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ -#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_PARITY Parity Control - * @{ - */ -#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ -#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ -#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_WAKEUP Wakeup - * @{ - */ -#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ -#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_DATAWIDTH Datawidth - * @{ - */ -#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ -#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling - * @{ - */ -#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ -#if defined(USART_CR1_OVER8) -#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ -#endif /* USART_OverSampling_Feature */ -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup USART_LL_EC_CLOCK Clock Signal - * @{ - */ - -#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ -#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse - * @{ - */ -#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ -#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_PHASE Clock Phase - * @{ - */ -#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ -#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_POLARITY Clock Polarity - * @{ - */ -#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ -#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_STOPBITS Stop Bits - * @{ - */ -#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ -#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ -#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ -#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_HWCONTROL Hardware Control - * @{ - */ -#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ -#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ -#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ -#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power - * @{ - */ -#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ -#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ -/** - * @} - */ - -/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length - * @{ - */ -#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ -#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup USART_LL_Exported_Macros USART Exported Macros - * @{ - */ - -/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in USART register - * @param __INSTANCE__ USART Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in USART register - * @param __INSTANCE__ USART Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper - * @{ - */ - -/** - * @brief Compute USARTDIV value according to Peripheral Clock and - * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) - * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance - * @param __BAUDRATE__ Baud rate value to achieve - * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case - */ -#define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(2*(__BAUDRATE__))) -#define __LL_USART_DIVMANT_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__))/100) -#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8\ - + 50) / 100) -/* UART BRR = mantissa + overflow + fraction - = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ -#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ - ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ - (__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0x07)) - -/** - * @brief Compute USARTDIV value according to Peripheral Clock and - * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) - * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance - * @param __BAUDRATE__ Baud rate value to achieve - * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case - */ -#define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(4*(__BAUDRATE__))) -#define __LL_USART_DIVMANT_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__))/100) -#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16)\ - + 50) / 100) -/* USART BRR = mantissa + overflow + fraction - = (USART DIVMANT << 4) + (USART DIVFRAQ & 0xF0) + (USART DIVFRAQ & 0x0F) */ -#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ - (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ - (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0x0F)) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup USART_LL_Exported_Functions USART Exported Functions - * @{ - */ - -/** @defgroup USART_LL_EF_Configuration Configuration functions - * @{ - */ - -/** - * @brief USART Enable - * @rmtoll CR1 UE LL_USART_Enable - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR1, USART_CR1_UE); -} - -/** - * @brief USART Disable (all USART prescalers and outputs are disabled) - * @note When USART is disabled, USART prescalers and outputs are stopped immediately, - * and current operations are discarded. The configuration of the USART is kept, but all the status - * flags, in the USARTx_SR are set to their default values. - * @rmtoll CR1 UE LL_USART_Disable - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR1, USART_CR1_UE); -} - -/** - * @brief Indicate if USART is enabled - * @rmtoll CR1 UE LL_USART_IsEnabled - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)); -} - -/** - * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) - * @rmtoll CR1 RE LL_USART_EnableDirectionRx - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); -} - -/** - * @brief Receiver Disable - * @rmtoll CR1 RE LL_USART_DisableDirectionRx - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); -} - -/** - * @brief Transmitter Enable - * @rmtoll CR1 TE LL_USART_EnableDirectionTx - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); -} - -/** - * @brief Transmitter Disable - * @rmtoll CR1 TE LL_USART_DisableDirectionTx - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); -} - -/** - * @brief Configure simultaneously enabled/disabled states - * of Transmitter and Receiver - * @rmtoll CR1 RE LL_USART_SetTransferDirection\n - * CR1 TE LL_USART_SetTransferDirection - * @param USARTx USART Instance - * @param TransferDirection This parameter can be one of the following values: - * @arg @ref LL_USART_DIRECTION_NONE - * @arg @ref LL_USART_DIRECTION_RX - * @arg @ref LL_USART_DIRECTION_TX - * @arg @ref LL_USART_DIRECTION_TX_RX - * @retval None - */ -__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) -{ - ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); -} - -/** - * @brief Return enabled/disabled states of Transmitter and Receiver - * @rmtoll CR1 RE LL_USART_GetTransferDirection\n - * CR1 TE LL_USART_GetTransferDirection - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_DIRECTION_NONE - * @arg @ref LL_USART_DIRECTION_RX - * @arg @ref LL_USART_DIRECTION_TX - * @arg @ref LL_USART_DIRECTION_TX_RX - */ -__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); -} - -/** - * @brief Configure Parity (enabled/disabled and parity mode if enabled). - * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. - * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position - * (9th or 8th bit depending on data width) and parity is checked on the received data. - * @rmtoll CR1 PS LL_USART_SetParity\n - * CR1 PCE LL_USART_SetParity - * @param USARTx USART Instance - * @param Parity This parameter can be one of the following values: - * @arg @ref LL_USART_PARITY_NONE - * @arg @ref LL_USART_PARITY_EVEN - * @arg @ref LL_USART_PARITY_ODD - * @retval None - */ -__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) -{ - MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); -} - -/** - * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) - * @rmtoll CR1 PS LL_USART_GetParity\n - * CR1 PCE LL_USART_GetParity - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_PARITY_NONE - * @arg @ref LL_USART_PARITY_EVEN - * @arg @ref LL_USART_PARITY_ODD - */ -__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); -} - -/** - * @brief Set Receiver Wake Up method from Mute mode. - * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod - * @param USARTx USART Instance - * @param Method This parameter can be one of the following values: - * @arg @ref LL_USART_WAKEUP_IDLELINE - * @arg @ref LL_USART_WAKEUP_ADDRESSMARK - * @retval None - */ -__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) -{ - MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); -} - -/** - * @brief Return Receiver Wake Up method from Mute mode - * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_WAKEUP_IDLELINE - * @arg @ref LL_USART_WAKEUP_ADDRESSMARK - */ -__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); -} - -/** - * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) - * @rmtoll CR1 M LL_USART_SetDataWidth - * @param USARTx USART Instance - * @param DataWidth This parameter can be one of the following values: - * @arg @ref LL_USART_DATAWIDTH_8B - * @arg @ref LL_USART_DATAWIDTH_9B - * @retval None - */ -__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) -{ - MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); -} - -/** - * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) - * @rmtoll CR1 M LL_USART_GetDataWidth - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_DATAWIDTH_8B - * @arg @ref LL_USART_DATAWIDTH_9B - */ -__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); -} - -#if defined(USART_CR1_OVER8) -/** - * @brief Set Oversampling to 8-bit or 16-bit mode - * @rmtoll CR1 OVER8 LL_USART_SetOverSampling - * @param USARTx USART Instance - * @param OverSampling This parameter can be one of the following values: - * @arg @ref LL_USART_OVERSAMPLING_16 - * @arg @ref LL_USART_OVERSAMPLING_8 - * @retval None - */ -__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) -{ - MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); -} - -/** - * @brief Return Oversampling mode - * @rmtoll CR1 OVER8 LL_USART_GetOverSampling - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_OVERSAMPLING_16 - * @arg @ref LL_USART_OVERSAMPLING_8 - */ -__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); -} - -#endif /* USART_OverSampling_Feature */ -/** - * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput - * @param USARTx USART Instance - * @param LastBitClockPulse This parameter can be one of the following values: - * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT - * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT - * @retval None - */ -__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); -} - -/** - * @brief Retrieve Clock pulse of the last data bit output configuration - * (Last bit Clock pulse output to the SCLK pin or not) - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT - * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT - */ -__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); -} - -/** - * @brief Select the phase of the clock output on the SCLK pin in synchronous mode - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CPHA LL_USART_SetClockPhase - * @param USARTx USART Instance - * @param ClockPhase This parameter can be one of the following values: - * @arg @ref LL_USART_PHASE_1EDGE - * @arg @ref LL_USART_PHASE_2EDGE - * @retval None - */ -__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); -} - -/** - * @brief Return phase of the clock output on the SCLK pin in synchronous mode - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CPHA LL_USART_GetClockPhase - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_PHASE_1EDGE - * @arg @ref LL_USART_PHASE_2EDGE - */ -__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); -} - -/** - * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CPOL LL_USART_SetClockPolarity - * @param USARTx USART Instance - * @param ClockPolarity This parameter can be one of the following values: - * @arg @ref LL_USART_POLARITY_LOW - * @arg @ref LL_USART_POLARITY_HIGH - * @retval None - */ -__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); -} - -/** - * @brief Return polarity of the clock output on the SCLK pin in synchronous mode - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CPOL LL_USART_GetClockPolarity - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_POLARITY_LOW - * @arg @ref LL_USART_POLARITY_HIGH - */ -__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); -} - -/** - * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @note Call of this function is equivalent to following function call sequence : - * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function - * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function - * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function - * @rmtoll CR2 CPHA LL_USART_ConfigClock\n - * CR2 CPOL LL_USART_ConfigClock\n - * CR2 LBCL LL_USART_ConfigClock - * @param USARTx USART Instance - * @param Phase This parameter can be one of the following values: - * @arg @ref LL_USART_PHASE_1EDGE - * @arg @ref LL_USART_PHASE_2EDGE - * @param Polarity This parameter can be one of the following values: - * @arg @ref LL_USART_POLARITY_LOW - * @arg @ref LL_USART_POLARITY_HIGH - * @param LBCPOutput This parameter can be one of the following values: - * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT - * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); -} - -/** - * @brief Enable Clock output on SCLK pin - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR2, USART_CR2_CLKEN); -} - -/** - * @brief Disable Clock output on SCLK pin - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); -} - -/** - * @brief Indicate if Clock output on SCLK pin is enabled - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)); -} - -/** - * @brief Set the length of the stop bits - * @rmtoll CR2 STOP LL_USART_SetStopBitsLength - * @param USARTx USART Instance - * @param StopBits This parameter can be one of the following values: - * @arg @ref LL_USART_STOPBITS_0_5 - * @arg @ref LL_USART_STOPBITS_1 - * @arg @ref LL_USART_STOPBITS_1_5 - * @arg @ref LL_USART_STOPBITS_2 - * @retval None - */ -__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); -} - -/** - * @brief Retrieve the length of the stop bits - * @rmtoll CR2 STOP LL_USART_GetStopBitsLength - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_STOPBITS_0_5 - * @arg @ref LL_USART_STOPBITS_1 - * @arg @ref LL_USART_STOPBITS_1_5 - * @arg @ref LL_USART_STOPBITS_2 - */ -__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); -} - -/** - * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) - * @note Call of this function is equivalent to following function call sequence : - * - Data Width configuration using @ref LL_USART_SetDataWidth() function - * - Parity Control and mode configuration using @ref LL_USART_SetParity() function - * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function - * @rmtoll CR1 PS LL_USART_ConfigCharacter\n - * CR1 PCE LL_USART_ConfigCharacter\n - * CR1 M LL_USART_ConfigCharacter\n - * CR2 STOP LL_USART_ConfigCharacter - * @param USARTx USART Instance - * @param DataWidth This parameter can be one of the following values: - * @arg @ref LL_USART_DATAWIDTH_8B - * @arg @ref LL_USART_DATAWIDTH_9B - * @param Parity This parameter can be one of the following values: - * @arg @ref LL_USART_PARITY_NONE - * @arg @ref LL_USART_PARITY_EVEN - * @arg @ref LL_USART_PARITY_ODD - * @param StopBits This parameter can be one of the following values: - * @arg @ref LL_USART_STOPBITS_0_5 - * @arg @ref LL_USART_STOPBITS_1 - * @arg @ref LL_USART_STOPBITS_1_5 - * @arg @ref LL_USART_STOPBITS_2 - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, - uint32_t StopBits) -{ - MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); - MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); -} - -/** - * @brief Set Address of the USART node. - * @note This is used in multiprocessor communication during Mute mode or Stop mode, - * for wake up with address mark detection. - * @rmtoll CR2 ADD LL_USART_SetNodeAddress - * @param USARTx USART Instance - * @param NodeAddress 4 bit Address of the USART node. - * @retval None - */ -__STATIC_INLINE void LL_USART_SetNodeAddress(USART_TypeDef *USARTx, uint32_t NodeAddress) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_ADD, (NodeAddress & USART_CR2_ADD)); -} - -/** - * @brief Return 4 bit Address of the USART node as set in ADD field of CR2. - * @note only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) - * @rmtoll CR2 ADD LL_USART_GetNodeAddress - * @param USARTx USART Instance - * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) - */ -__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD)); -} - -/** - * @brief Enable RTS HW Flow Control - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_RTSE); -} - -/** - * @brief Disable RTS HW Flow Control - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); -} - -/** - * @brief Enable CTS HW Flow Control - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_CTSE); -} - -/** - * @brief Disable CTS HW Flow Control - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); -} - -/** - * @brief Configure HW Flow Control mode (both CTS and RTS) - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n - * CR3 CTSE LL_USART_SetHWFlowCtrl - * @param USARTx USART Instance - * @param HardwareFlowControl This parameter can be one of the following values: - * @arg @ref LL_USART_HWCONTROL_NONE - * @arg @ref LL_USART_HWCONTROL_RTS - * @arg @ref LL_USART_HWCONTROL_CTS - * @arg @ref LL_USART_HWCONTROL_RTS_CTS - * @retval None - */ -__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) -{ - MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); -} - -/** - * @brief Return HW Flow Control configuration (both CTS and RTS) - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n - * CR3 CTSE LL_USART_GetHWFlowCtrl - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_HWCONTROL_NONE - * @arg @ref LL_USART_HWCONTROL_RTS - * @arg @ref LL_USART_HWCONTROL_CTS - * @arg @ref LL_USART_HWCONTROL_RTS_CTS - */ -__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); -} - -#if defined(USART_CR3_ONEBIT) -/** - * @brief Enable One bit sampling method - * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); -} - -/** - * @brief Disable One bit sampling method - * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); -} - -/** - * @brief Indicate if One bit sampling method is enabled - * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)); -} -#endif /* USART_OneBitSampling_Feature */ - -#if defined(USART_CR1_OVER8) -/** - * @brief Configure USART BRR register for achieving expected Baud Rate value. - * @note Compute and set USARTDIV value in BRR Register (full BRR content) - * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values - * @note Peripheral clock and Baud rate values provided as function parameters should be valid - * (Baud rate value != 0) - * @rmtoll BRR BRR LL_USART_SetBaudRate - * @param USARTx USART Instance - * @param PeriphClk Peripheral Clock - * @param OverSampling This parameter can be one of the following values: - * @arg @ref LL_USART_OVERSAMPLING_16 - * @arg @ref LL_USART_OVERSAMPLING_8 - * @param BaudRate Baud Rate - * @retval None - */ -__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling, - uint32_t BaudRate) -{ - if (OverSampling == LL_USART_OVERSAMPLING_8) - { - USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate)); - } - else - { - USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); - } -} - -/** - * @brief Return current Baud Rate value, according to USARTDIV present in BRR register - * (full BRR content), and to used Peripheral Clock and Oversampling mode values - * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. - * @rmtoll BRR BRR LL_USART_GetBaudRate - * @param USARTx USART Instance - * @param PeriphClk Peripheral Clock - * @param OverSampling This parameter can be one of the following values: - * @arg @ref LL_USART_OVERSAMPLING_16 - * @arg @ref LL_USART_OVERSAMPLING_8 - * @retval Baud Rate - */ -__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) -{ - uint32_t usartdiv = 0x0U; - uint32_t brrresult = 0x0U; - - usartdiv = USARTx->BRR; - - if (OverSampling == LL_USART_OVERSAMPLING_8) - { - if ((usartdiv & 0xFFF7U) != 0U) - { - usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; - brrresult = (PeriphClk * 2U) / usartdiv; - } - } - else - { - if ((usartdiv & 0xFFFFU) != 0U) - { - brrresult = PeriphClk / usartdiv; - } - } - return (brrresult); -} -#else -/** - * @brief Configure USART BRR register for achieving expected Baud Rate value. - * @note Compute and set USARTDIV value in BRR Register (full BRR content) - * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values - * @note Peripheral clock and Baud rate values provided as function parameters should be valid - * (Baud rate value != 0) - * @rmtoll BRR BRR LL_USART_SetBaudRate - * @param USARTx USART Instance - * @param PeriphClk Peripheral Clock - * @param BaudRate Baud Rate - * @retval None - */ -__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t BaudRate) -{ - USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); -} - -/** - * @brief Return current Baud Rate value, according to USARTDIV present in BRR register - * (full BRR content), and to used Peripheral Clock and Oversampling mode values - * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. - * @rmtoll BRR BRR LL_USART_GetBaudRate - * @param USARTx USART Instance - * @param PeriphClk Peripheral Clock - * @retval Baud Rate - */ -__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk) -{ - uint32_t usartdiv = 0x0U; - uint32_t brrresult = 0x0U; - - usartdiv = USARTx->BRR; - - if ((usartdiv & 0xFFFFU) != 0U) - { - brrresult = PeriphClk / usartdiv; - } - return (brrresult); -} -#endif /* USART_OverSampling_Feature */ - -/** - * @} - */ - -/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature - * @{ - */ - -/** - * @brief Enable IrDA mode - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll CR3 IREN LL_USART_EnableIrda - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_IREN); -} - -/** - * @brief Disable IrDA mode - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll CR3 IREN LL_USART_DisableIrda - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); -} - -/** - * @brief Indicate if IrDA mode is enabled - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll CR3 IREN LL_USART_IsEnabledIrda - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)); -} - -/** - * @brief Configure IrDA Power Mode (Normal or Low Power) - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode - * @param USARTx USART Instance - * @param PowerMode This parameter can be one of the following values: - * @arg @ref LL_USART_IRDA_POWER_NORMAL - * @arg @ref LL_USART_IRDA_POWER_LOW - * @retval None - */ -__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) -{ - MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); -} - -/** - * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_IRDA_POWER_NORMAL - * @arg @ref LL_USART_PHASE_2EDGE - */ -__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); -} - -/** - * @brief Set Irda prescaler value, used for dividing the USART clock source - * to achieve the Irda Low Power frequency (8 bits value) - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler - * @param USARTx USART Instance - * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) -{ - MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); -} - -/** - * @brief Return Irda prescaler value, used for dividing the USART clock source - * to achieve the Irda Low Power frequency (8 bits value) - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler - * @param USARTx USART Instance - * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) - */ -__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature - * @{ - */ - -/** - * @brief Enable Smartcard NACK transmission - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_NACK); -} - -/** - * @brief Disable Smartcard NACK transmission - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); -} - -/** - * @brief Indicate if Smartcard NACK transmission is enabled - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)); -} - -/** - * @brief Enable Smartcard mode - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll CR3 SCEN LL_USART_EnableSmartcard - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_SCEN); -} - -/** - * @brief Disable Smartcard mode - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll CR3 SCEN LL_USART_DisableSmartcard - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); -} - -/** - * @brief Indicate if Smartcard mode is enabled - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)); -} - -/** - * @brief Set Smartcard prescaler value, used for dividing the USART clock - * source to provide the SMARTCARD Clock (5 bits value) - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler - * @param USARTx USART Instance - * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 - * @retval None - */ -__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) -{ - MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); -} - -/** - * @brief Return Smartcard prescaler value, used for dividing the USART clock - * source to provide the SMARTCARD Clock (5 bits value) - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler - * @param USARTx USART Instance - * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) - */ -__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); -} - -/** - * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods - * (GT[7:0] bits : Guard time value) - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime - * @param USARTx USART Instance - * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) -{ - MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, GuardTime << USART_POSITION_GTPR_GT); -} - -/** - * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods - * (GT[7:0] bits : Guard time value) - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime - * @param USARTx USART Instance - * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) - */ -__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_POSITION_GTPR_GT); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature - * @{ - */ - -/** - * @brief Enable Single Wire Half-Duplex mode - * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not - * Half-Duplex mode is supported by the USARTx instance. - * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR3, USART_CR3_HDSEL); -} - -/** - * @brief Disable Single Wire Half-Duplex mode - * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not - * Half-Duplex mode is supported by the USARTx instance. - * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); -} - -/** - * @brief Indicate if Single Wire Half-Duplex mode is enabled - * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not - * Half-Duplex mode is supported by the USARTx instance. - * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature - * @{ - */ - -/** - * @brief Set LIN Break Detection Length - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen - * @param USARTx USART Instance - * @param LINBDLength This parameter can be one of the following values: - * @arg @ref LL_USART_LINBREAK_DETECT_10B - * @arg @ref LL_USART_LINBREAK_DETECT_11B - * @retval None - */ -__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) -{ - MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); -} - -/** - * @brief Return LIN Break Detection Length - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen - * @param USARTx USART Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_USART_LINBREAK_DETECT_10B - * @arg @ref LL_USART_LINBREAK_DETECT_11B - */ -__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) -{ - return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); -} - -/** - * @brief Enable LIN mode - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LINEN LL_USART_EnableLIN - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR2, USART_CR2_LINEN); -} - -/** - * @brief Disable LIN mode - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LINEN LL_USART_DisableLIN - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); -} - -/** - * @brief Indicate if LIN mode is enabled - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services - * @{ - */ - -/** - * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) - * @note In UART mode, the following bits must be kept cleared: - * - LINEN bit in the USART_CR2 register, - * - CLKEN bit in the USART_CR2 register, - * - SCEN bit in the USART_CR3 register, - * - IREN bit in the USART_CR3 register, - * - HDSEL bit in the USART_CR3 register. - * @note Call of this function is equivalent to following function call sequence : - * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function - * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function - * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function - * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function - * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function - * @note Other remaining configurations items related to Asynchronous Mode - * (as Baud Rate, Word length, Parity, ...) should be set using - * dedicated functions - * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n - * CR2 CLKEN LL_USART_ConfigAsyncMode\n - * CR3 SCEN LL_USART_ConfigAsyncMode\n - * CR3 IREN LL_USART_ConfigAsyncMode\n - * CR3 HDSEL LL_USART_ConfigAsyncMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) -{ - /* In Asynchronous mode, the following bits must be kept cleared: - - LINEN, CLKEN bits in the USART_CR2 register, - - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); -} - -/** - * @brief Perform basic configuration of USART for enabling use in Synchronous Mode - * @note In Synchronous mode, the following bits must be kept cleared: - * - LINEN bit in the USART_CR2 register, - * - SCEN bit in the USART_CR3 register, - * - IREN bit in the USART_CR3 register, - * - HDSEL bit in the USART_CR3 register. - * This function also sets the USART in Synchronous mode. - * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not - * Synchronous mode is supported by the USARTx instance. - * @note Call of this function is equivalent to following function call sequence : - * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function - * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function - * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function - * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function - * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function - * @note Other remaining configurations items related to Synchronous Mode - * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using - * dedicated functions - * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n - * CR2 CLKEN LL_USART_ConfigSyncMode\n - * CR3 SCEN LL_USART_ConfigSyncMode\n - * CR3 IREN LL_USART_ConfigSyncMode\n - * CR3 HDSEL LL_USART_ConfigSyncMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) -{ - /* In Synchronous mode, the following bits must be kept cleared: - - LINEN bit in the USART_CR2 register, - - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); - /* set the UART/USART in Synchronous mode */ - SET_BIT(USARTx->CR2, USART_CR2_CLKEN); -} - -/** - * @brief Perform basic configuration of USART for enabling use in LIN Mode - * @note In LIN mode, the following bits must be kept cleared: - * - STOP and CLKEN bits in the USART_CR2 register, - * - SCEN bit in the USART_CR3 register, - * - IREN bit in the USART_CR3 register, - * - HDSEL bit in the USART_CR3 register. - * This function also set the UART/USART in LIN mode. - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @note Call of this function is equivalent to following function call sequence : - * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function - * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function - * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function - * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function - * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function - * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function - * @note Other remaining configurations items related to LIN Mode - * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using - * dedicated functions - * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n - * CR2 STOP LL_USART_ConfigLINMode\n - * CR2 LINEN LL_USART_ConfigLINMode\n - * CR3 IREN LL_USART_ConfigLINMode\n - * CR3 SCEN LL_USART_ConfigLINMode\n - * CR3 HDSEL LL_USART_ConfigLINMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) -{ - /* In LIN mode, the following bits must be kept cleared: - - STOP and CLKEN bits in the USART_CR2 register, - - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); - /* Set the UART/USART in LIN mode */ - SET_BIT(USARTx->CR2, USART_CR2_LINEN); -} - -/** - * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode - * @note In Half Duplex mode, the following bits must be kept cleared: - * - LINEN bit in the USART_CR2 register, - * - CLKEN bit in the USART_CR2 register, - * - SCEN bit in the USART_CR3 register, - * - IREN bit in the USART_CR3 register, - * This function also sets the UART/USART in Half Duplex mode. - * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not - * Half-Duplex mode is supported by the USARTx instance. - * @note Call of this function is equivalent to following function call sequence : - * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function - * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function - * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function - * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function - * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function - * @note Other remaining configurations items related to Half Duplex Mode - * (as Baud Rate, Word length, Parity, ...) should be set using - * dedicated functions - * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n - * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n - * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n - * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n - * CR3 IREN LL_USART_ConfigHalfDuplexMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) -{ - /* In Half Duplex mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); - /* set the UART/USART in Half Duplex mode */ - SET_BIT(USARTx->CR3, USART_CR3_HDSEL); -} - -/** - * @brief Perform basic configuration of USART for enabling use in Smartcard Mode - * @note In Smartcard mode, the following bits must be kept cleared: - * - LINEN bit in the USART_CR2 register, - * - IREN bit in the USART_CR3 register, - * - HDSEL bit in the USART_CR3 register. - * This function also configures Stop bits to 1.5 bits and - * sets the USART in Smartcard mode (SCEN bit). - * Clock Output is also enabled (CLKEN). - * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not - * Smartcard feature is supported by the USARTx instance. - * @note Call of this function is equivalent to following function call sequence : - * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function - * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function - * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function - * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function - * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function - * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function - * @note Other remaining configurations items related to Smartcard Mode - * (as Baud Rate, Word length, Parity, ...) should be set using - * dedicated functions - * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n - * CR2 STOP LL_USART_ConfigSmartcardMode\n - * CR2 CLKEN LL_USART_ConfigSmartcardMode\n - * CR3 HDSEL LL_USART_ConfigSmartcardMode\n - * CR3 SCEN LL_USART_ConfigSmartcardMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) -{ - /* In Smartcard mode, the following bits must be kept cleared: - - LINEN bit in the USART_CR2 register, - - IREN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); - /* Configure Stop bits to 1.5 bits */ - /* Synchronous mode is activated by default */ - SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); - /* set the UART/USART in Smartcard mode */ - SET_BIT(USARTx->CR3, USART_CR3_SCEN); -} - -/** - * @brief Perform basic configuration of USART for enabling use in Irda Mode - * @note In IRDA mode, the following bits must be kept cleared: - * - LINEN bit in the USART_CR2 register, - * - STOP and CLKEN bits in the USART_CR2 register, - * - SCEN bit in the USART_CR3 register, - * - HDSEL bit in the USART_CR3 register. - * This function also sets the UART/USART in IRDA mode (IREN bit). - * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not - * IrDA feature is supported by the USARTx instance. - * @note Call of this function is equivalent to following function call sequence : - * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function - * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function - * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function - * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function - * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function - * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function - * @note Other remaining configurations items related to Irda Mode - * (as Baud Rate, Word length, Power mode, ...) should be set using - * dedicated functions - * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n - * CR2 CLKEN LL_USART_ConfigIrdaMode\n - * CR2 STOP LL_USART_ConfigIrdaMode\n - * CR3 SCEN LL_USART_ConfigIrdaMode\n - * CR3 HDSEL LL_USART_ConfigIrdaMode\n - * CR3 IREN LL_USART_ConfigIrdaMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) -{ - /* In IRDA mode, the following bits must be kept cleared: - - LINEN, STOP and CLKEN bits in the USART_CR2 register, - - SCEN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); - /* set the UART/USART in IRDA mode */ - SET_BIT(USARTx->CR3, USART_CR3_IREN); -} - -/** - * @brief Perform basic configuration of USART for enabling use in Multi processor Mode - * (several USARTs connected in a network, one of the USARTs can be the master, - * its TX output connected to the RX inputs of the other slaves USARTs). - * @note In MultiProcessor mode, the following bits must be kept cleared: - * - LINEN bit in the USART_CR2 register, - * - CLKEN bit in the USART_CR2 register, - * - SCEN bit in the USART_CR3 register, - * - IREN bit in the USART_CR3 register, - * - HDSEL bit in the USART_CR3 register. - * @note Call of this function is equivalent to following function call sequence : - * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function - * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function - * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function - * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function - * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function - * @note Other remaining configurations items related to Multi processor Mode - * (as Baud Rate, Wake Up Method, Node address, ...) should be set using - * dedicated functions - * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n - * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n - * CR3 SCEN LL_USART_ConfigMultiProcessMode\n - * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n - * CR3 IREN LL_USART_ConfigMultiProcessMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) -{ - /* In Multi Processor mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Check if the USART Parity Error Flag is set or not - * @rmtoll SR PE LL_USART_IsActiveFlag_PE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_PE) == (USART_SR_PE)); -} - -/** - * @brief Check if the USART Framing Error Flag is set or not - * @rmtoll SR FE LL_USART_IsActiveFlag_FE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_FE) == (USART_SR_FE)); -} - -/** - * @brief Check if the USART Noise error detected Flag is set or not - * @rmtoll SR NF LL_USART_IsActiveFlag_NE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_NE) == (USART_SR_NE)); -} - -/** - * @brief Check if the USART OverRun Error Flag is set or not - * @rmtoll SR ORE LL_USART_IsActiveFlag_ORE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_ORE) == (USART_SR_ORE)); -} - -/** - * @brief Check if the USART IDLE line detected Flag is set or not - * @rmtoll SR IDLE LL_USART_IsActiveFlag_IDLE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_IDLE) == (USART_SR_IDLE)); -} - -/** - * @brief Check if the USART Read Data Register Not Empty Flag is set or not - * @rmtoll SR RXNE LL_USART_IsActiveFlag_RXNE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_RXNE) == (USART_SR_RXNE)); -} - -/** - * @brief Check if the USART Transmission Complete Flag is set or not - * @rmtoll SR TC LL_USART_IsActiveFlag_TC - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_TC) == (USART_SR_TC)); -} - -/** - * @brief Check if the USART Transmit Data Register Empty Flag is set or not - * @rmtoll SR TXE LL_USART_IsActiveFlag_TXE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_TXE) == (USART_SR_TXE)); -} - -/** - * @brief Check if the USART LIN Break Detection Flag is set or not - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll SR LBD LL_USART_IsActiveFlag_LBD - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_LBD) == (USART_SR_LBD)); -} - -/** - * @brief Check if the USART CTS Flag is set or not - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll SR CTS LL_USART_IsActiveFlag_nCTS - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->SR, USART_SR_CTS) == (USART_SR_CTS)); -} - -/** - * @brief Check if the USART Send Break Flag is set or not - * @rmtoll CR1 SBK LL_USART_IsActiveFlag_SBK - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_SBK) == (USART_CR1_SBK)); -} - -/** - * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not - * @rmtoll CR1 RWU LL_USART_IsActiveFlag_RWU - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_RWU) == (USART_CR1_RWU)); -} - -/** - * @brief Clear Parity Error Flag - * @note Clearing this flag is done by a read access to the USARTx_SR - * register followed by a read access to the USARTx_DR register. - * @note Please also consider that when clearing this flag, other flags as - * NE, FE, ORE, IDLE would also be cleared. - * @rmtoll SR PE LL_USART_ClearFlag_PE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) -{ - __IO uint32_t tmpreg; - tmpreg = USARTx->SR; - (void) tmpreg; - tmpreg = USARTx->DR; - (void) tmpreg; -} - -/** - * @brief Clear Framing Error Flag - * @note Clearing this flag is done by a read access to the USARTx_SR - * register followed by a read access to the USARTx_DR register. - * @note Please also consider that when clearing this flag, other flags as - * PE, NE, ORE, IDLE would also be cleared. - * @rmtoll SR FE LL_USART_ClearFlag_FE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) -{ - __IO uint32_t tmpreg; - tmpreg = USARTx->SR; - (void) tmpreg; - tmpreg = USARTx->DR; - (void) tmpreg; -} - -/** - * @brief Clear Noise detected Flag - * @note Clearing this flag is done by a read access to the USARTx_SR - * register followed by a read access to the USARTx_DR register. - * @note Please also consider that when clearing this flag, other flags as - * PE, FE, ORE, IDLE would also be cleared. - * @rmtoll SR NF LL_USART_ClearFlag_NE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) -{ - __IO uint32_t tmpreg; - tmpreg = USARTx->SR; - (void) tmpreg; - tmpreg = USARTx->DR; - (void) tmpreg; -} - -/** - * @brief Clear OverRun Error Flag - * @note Clearing this flag is done by a read access to the USARTx_SR - * register followed by a read access to the USARTx_DR register. - * @note Please also consider that when clearing this flag, other flags as - * PE, NE, FE, IDLE would also be cleared. - * @rmtoll SR ORE LL_USART_ClearFlag_ORE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) -{ - __IO uint32_t tmpreg; - tmpreg = USARTx->SR; - (void) tmpreg; - tmpreg = USARTx->DR; - (void) tmpreg; -} - -/** - * @brief Clear IDLE line detected Flag - * @note Clearing this flag is done by a read access to the USARTx_SR - * register followed by a read access to the USARTx_DR register. - * @note Please also consider that when clearing this flag, other flags as - * PE, NE, FE, ORE would also be cleared. - * @rmtoll SR IDLE LL_USART_ClearFlag_IDLE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) -{ - __IO uint32_t tmpreg; - tmpreg = USARTx->SR; - (void) tmpreg; - tmpreg = USARTx->DR; - (void) tmpreg; -} - -/** - * @brief Clear Transmission Complete Flag - * @rmtoll SR TC LL_USART_ClearFlag_TC - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) -{ - WRITE_REG(USARTx->SR, ~(USART_SR_TC)); -} - -/** - * @brief Clear RX Not Empty Flag - * @rmtoll SR RXNE LL_USART_ClearFlag_RXNE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_RXNE(USART_TypeDef *USARTx) -{ - WRITE_REG(USARTx->SR, ~(USART_SR_RXNE)); -} - -/** - * @brief Clear LIN Break Detection Flag - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll SR LBD LL_USART_ClearFlag_LBD - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) -{ - WRITE_REG(USARTx->SR, ~(USART_SR_LBD)); -} - -/** - * @brief Clear CTS Interrupt Flag - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll SR CTS LL_USART_ClearFlag_nCTS - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) -{ - WRITE_REG(USARTx->SR, ~(USART_SR_CTS)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable IDLE Interrupt - * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); -} - -/** - * @brief Enable RX Not Empty Interrupt - * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); -} - -/** - * @brief Enable Transmission Complete Interrupt - * @rmtoll CR1 TCIE LL_USART_EnableIT_TC - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); -} - -/** - * @brief Enable TX Empty Interrupt - * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE); -} - -/** - * @brief Enable Parity Error Interrupt - * @rmtoll CR1 PEIE LL_USART_EnableIT_PE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); -} - -/** - * @brief Enable LIN Break Detection Interrupt - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR2, USART_CR2_LBDIE); -} - -/** - * @brief Enable Error Interrupt - * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing - * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). - * 0: Interrupt is inhibited - * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. - * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); -} - -/** - * @brief Enable CTS Interrupt - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); -} - -/** - * @brief Disable IDLE Interrupt - * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); -} - -/** - * @brief Disable RX Not Empty Interrupt - * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); -} - -/** - * @brief Disable Transmission Complete Interrupt - * @rmtoll CR1 TCIE LL_USART_DisableIT_TC - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); -} - -/** - * @brief Disable TX Empty Interrupt - * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); -} - -/** - * @brief Disable Parity Error Interrupt - * @rmtoll CR1 PEIE LL_USART_DisableIT_PE - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); -} - -/** - * @brief Disable LIN Break Detection Interrupt - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); -} - -/** - * @brief Disable Error Interrupt - * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing - * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). - * 0: Interrupt is inhibited - * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. - * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); -} - -/** - * @brief Disable CTS Interrupt - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); -} - -/** - * @brief Check if the USART IDLE Interrupt source is enabled or disabled. - * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)); -} - -/** - * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled. - * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)); -} - -/** - * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. - * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)); -} - -/** - * @brief Check if the USART TX Empty Interrupt is enabled or disabled. - * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)); -} - -/** - * @brief Check if the USART Parity Error Interrupt is enabled or disabled. - * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)); -} - -/** - * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. - * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not - * LIN feature is supported by the USARTx instance. - * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)); -} - -/** - * @brief Check if the USART Error Interrupt is enabled or disabled. - * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)); -} - -/** - * @brief Check if the USART CTS Interrupt is enabled or disabled. - * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not - * Hardware Flow control feature is supported by the USARTx instance. - * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_DMA_Management DMA_Management - * @{ - */ - -/** - * @brief Enable DMA Mode for reception - * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); -} - -/** - * @brief Disable DMA Mode for reception - * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); -} - -/** - * @brief Check if DMA Mode is enabled for reception - * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)); -} - -/** - * @brief Enable DMA Mode for transmission - * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) -{ - ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); -} - -/** - * @brief Disable DMA Mode for transmission - * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) -{ - ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); -} - -/** - * @brief Check if DMA Mode is enabled for transmission - * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX - * @param USARTx USART Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) -{ - return (READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)); -} - -/** - * @brief Get the data register address used for DMA transfer - * @rmtoll DR DR LL_USART_DMA_GetRegAddr - * @note Address of Data Register is valid for both Transmit and Receive transfers. - * @param USARTx USART Instance - * @retval Address of data register - */ -__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx) -{ - /* return address of DR register */ - return ((uint32_t) &(USARTx->DR)); -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_Data_Management Data_Management - * @{ - */ - -/** - * @brief Read Receiver Data register (Receive Data value, 8 bits) - * @rmtoll DR DR LL_USART_ReceiveData8 - * @param USARTx USART Instance - * @retval Value between Min_Data=0x00 and Max_Data=0xFF - */ -__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) -{ - return (uint8_t)(READ_BIT(USARTx->DR, USART_DR_DR)); -} - -/** - * @brief Read Receiver Data register (Receive Data value, 9 bits) - * @rmtoll DR DR LL_USART_ReceiveData9 - * @param USARTx USART Instance - * @retval Value between Min_Data=0x00 and Max_Data=0x1FF - */ -__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) -{ - return (uint16_t)(READ_BIT(USARTx->DR, USART_DR_DR)); -} - -/** - * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) - * @rmtoll DR DR LL_USART_TransmitData8 - * @param USARTx USART Instance - * @param Value between Min_Data=0x00 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) -{ - USARTx->DR = Value; -} - -/** - * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) - * @rmtoll DR DR LL_USART_TransmitData9 - * @param USARTx USART Instance - * @param Value between Min_Data=0x00 and Max_Data=0x1FF - * @retval None - */ -__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) -{ - USARTx->DR = Value & 0x1FFU; -} - -/** - * @} - */ - -/** @defgroup USART_LL_EF_Execution Execution - * @{ - */ - -/** - * @brief Request Break sending - * @rmtoll CR1 SBK LL_USART_RequestBreakSending - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR1, USART_CR1_SBK); -} - -/** - * @brief Put USART in Mute mode - * @rmtoll CR1 RWU LL_USART_RequestEnterMuteMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) -{ - SET_BIT(USARTx->CR1, USART_CR1_RWU); -} - -/** - * @brief Put USART in Active mode - * @rmtoll CR1 RWU LL_USART_RequestExitMuteMode - * @param USARTx USART Instance - * @retval None - */ -__STATIC_INLINE void LL_USART_RequestExitMuteMode(USART_TypeDef *USARTx) -{ - CLEAR_BIT(USARTx->CR1, USART_CR1_RWU); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions - * @{ - */ -ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); -ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); -void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); -ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); -void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_LL_USART_H */ - diff --git a/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c b/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c new file mode 100644 index 0000000..6e01d0f --- /dev/null +++ b/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c @@ -0,0 +1,1206 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_tim.c + * @author MCD Application Team + * @brief TIM LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_tim.h" +#include "stm32f1xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) + +/** @addtogroup TIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIM_LL_Private_Macros + * @{ + */ +#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) + +#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) + +#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ + || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM2)) + +#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ + || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) + +#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ + || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) + +#define IS_LL_TIM_OCIDLESTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCIDLESTATE_LOW) \ + || ((__VALUE__) == LL_TIM_OCIDLESTATE_HIGH)) + +#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) + +#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) + +#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) + +#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) + +#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) + +#define IS_LL_TIM_OSSR_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSR_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSR_ENABLE)) + +#define IS_LL_TIM_OSSI_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSI_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSI_ENABLE)) + +#define IS_LL_TIM_LOCK_LEVEL(__VALUE__) (((__VALUE__) == LL_TIM_LOCKLEVEL_OFF) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_1) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_2) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_3)) + +#define IS_LL_TIM_BREAK_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK_ENABLE)) + +#define IS_LL_TIM_BREAK_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK_POLARITY_HIGH)) + +#define IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(__VALUE__) (((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_DISABLE) \ + || ((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_ENABLE)) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_LL_Private_Functions TIM Private Functions + * @{ + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set TIMx registers to their reset values. + * @param TIMx Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: invalid TIMx instance + */ +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + + if (TIMx == TIM2) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); + } +#if defined(TIM1) + else if (TIMx == TIM1) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1); + } +#endif /* TIM1 */ +#if defined(TIM3) + else if (TIMx == TIM3) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); + } +#endif /* TIM3 */ +#if defined(TIM4) + else if (TIMx == TIM4) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4); + } +#endif /* TIM4 */ +#if defined(TIM5) + else if (TIMx == TIM5) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM5); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM5); + } +#endif /* TIM5 */ +#if defined(TIM6) + else if (TIMx == TIM6) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); + } +#endif /* TIM6 */ +#if defined (TIM7) + else if (TIMx == TIM7) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); + } +#endif /* TIM7 */ +#if defined(TIM8) + else if (TIMx == TIM8) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM8); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM8); + } +#endif /* TIM8 */ +#if defined(TIM9) + else if (TIMx == TIM9) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM9); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM9); + } +#endif /* TIM9 */ +#if defined(TIM10) + else if (TIMx == TIM10) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM10); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM10); + } +#endif /* TIM10 */ +#if defined(TIM11) + else if (TIMx == TIM11) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM11); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM11); + } +#endif /* TIM11 */ +#if defined(TIM12) + else if (TIMx == TIM12) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM12); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM12); + } +#endif /* TIM12 */ +#if defined(TIM13) + else if (TIMx == TIM13) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM13); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM13); + } +#endif /* TIM13 */ +#if defined(TIM14) + else if (TIMx == TIM14) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM14); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM14); + } +#endif /* TIM14 */ +#if defined(TIM15) + else if (TIMx == TIM15) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM15); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM15); + } +#endif /* TIM15 */ +#if defined(TIM16) + else if (TIMx == TIM16) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16); + } +#endif /* TIM16 */ +#if defined(TIM17) + else if (TIMx == TIM17) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17); + } +#endif /* TIM17 */ + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set the fields of the time base unit configuration data structure + * to their default values. + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) + * @retval None + */ +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) +{ + /* Set the default configuration */ + TIM_InitStruct->Prescaler = (uint16_t)0x0000; + TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct->Autoreload = 0xFFFFFFFFU; + TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; + TIM_InitStruct->RepetitionCounter = 0x00000000U; +} + +/** + * @brief Configure the TIMx time base unit. + * @param TIMx Timer Instance + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure + * (TIMx time base unit configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); + assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); + + tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); + + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); + } + + /* Write to TIMx CR1 */ + LL_TIM_WriteReg(TIMx, CR1, tmpcr1); + + /* Set the Autoreload value */ + LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); + + /* Set the Prescaler value */ + LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + LL_TIM_SetRepetitionCounter(TIMx, TIM_InitStruct->RepetitionCounter); + } + + /* Generate an update event to reload the Prescaler + and the repetition counter value (if applicable) immediately */ + LL_TIM_GenerateEvent_UPDATE(TIMx); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx output channel configuration data + * structure to their default values. + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure + * (the output channel configuration data structure) + * @retval None + */ +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + /* Set the default configuration */ + TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; + TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->OCNState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->CompareValue = 0x00000000U; + TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCNPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCIdleState = LL_TIM_OCIDLESTATE_LOW; + TIM_OC_InitStruct->OCNIdleState = LL_TIM_OCIDLESTATE_LOW; +} + +/** + * @brief Configure the TIMx output channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = OC1Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = OC2Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = OC3Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = OC4Config(TIMx, TIM_OC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Set the fields of the TIMx input channel configuration data + * structure to their default values. + * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration + * data structure) + * @retval None + */ +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; + TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; + TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the TIMx input channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data + * structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = IC1Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = IC2Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = IC3Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = IC4Config(TIMx, TIM_IC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Fills each TIM_EncoderInitStruct field with its default value + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface + * configuration data structure) + * @retval None + */ +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + /* Set the default configuration */ + TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; + TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the encoder interface of the timer instance. + * @param TIMx Timer Instance + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface + * configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Configure TI1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); + + /* Configure TI2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); + + /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Set encoder mode */ + LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx Hall sensor interface configuration data + * structure to their default values. + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface + * configuration data structure) + * @retval None + */ +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + /* Set the default configuration */ + TIM_HallSensorInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_HallSensorInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_HallSensorInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_HallSensorInitStruct->CommutationDelay = 0U; +} + +/** + * @brief Configure the Hall sensor interface of the timer instance. + * @note TIMx CH1, CH2 and CH3 inputs connected through a XOR + * to the TI1 input channel + * @note TIMx slave mode controller is configured in reset mode. + Selected internal trigger is TI1F_ED. + * @note Channel 1 is configured as input, IC1 is mapped on TRC. + * @note Captured value stored in TIMx_CCR1 correspond to the time elapsed + * between 2 changes on the inputs. It gives information about motor speed. + * @note Channel 2 is configured in output PWM 2 mode. + * @note Compare value stored in TIMx_CCR2 corresponds to the commutation delay. + * @note OC2REF is selected as trigger output on TRGO. + * @param TIMx Timer Instance + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor + * interface configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + uint32_t tmpcr2; + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_HallSensorInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ICPSC(TIM_HallSensorInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_HallSensorInitStruct->IC1Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx SMCR register value */ + tmpsmcr = LL_TIM_ReadReg(TIMx, SMCR); + + /* Connect TIMx_CH1, CH2 and CH3 pins to the TI1 input */ + tmpcr2 |= TIM_CR2_TI1S; + + /* OC2REF signal is used as trigger output (TRGO) */ + tmpcr2 |= LL_TIM_TRGO_OC2REF; + + /* Configure the slave mode controller */ + tmpsmcr &= (uint32_t)~(TIM_SMCR_TS | TIM_SMCR_SMS); + tmpsmcr |= LL_TIM_TS_TI1F_ED; + tmpsmcr |= LL_TIM_SLAVEMODE_RESET; + + /* Configure input channel 1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(LL_TIM_ACTIVEINPUT_TRC >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Prescaler >> 16U); + + /* Configure input channel 2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_OC2M | TIM_CCMR1_OC2FE | TIM_CCMR1_OC2PE | TIM_CCMR1_OC2CE); + tmpccmr1 |= (uint32_t)(LL_TIM_OCMODE_PWM2 << 8U); + + /* Set Channel 1 polarity and enable Channel 1 and Channel2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_HallSensorInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx SMCR */ + LL_TIM_WriteReg(TIMx, SMCR, tmpsmcr); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + /* Write to TIMx CCR2 */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_HallSensorInitStruct->CommutationDelay); + + return SUCCESS; +} + +/** + * @brief Set the fields of the Break and Dead Time configuration data structure + * to their default values. + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval None + */ +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->OSSRState = LL_TIM_OSSR_DISABLE; + TIM_BDTRInitStruct->OSSIState = LL_TIM_OSSI_DISABLE; + TIM_BDTRInitStruct->LockLevel = LL_TIM_LOCKLEVEL_OFF; + TIM_BDTRInitStruct->DeadTime = (uint8_t)0x00; + TIM_BDTRInitStruct->BreakState = LL_TIM_BREAK_DISABLE; + TIM_BDTRInitStruct->BreakPolarity = LL_TIM_BREAK_POLARITY_LOW; + TIM_BDTRInitStruct->AutomaticOutput = LL_TIM_AUTOMATICOUTPUT_DISABLE; +} + +/** + * @brief Configure the Break and Dead Time feature of the timer instance. + * @note As the bits AOE, BKP, BKE, OSSR, OSSI and DTG[7:0] can be write-locked + * depending on the LOCK configuration, it can be necessary to configure all of + * them during the first write access to the TIMx_BDTR register. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @param TIMx Timer Instance + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Break and Dead Time is initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + uint32_t tmpbdtr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OSSR_STATE(TIM_BDTRInitStruct->OSSRState)); + assert_param(IS_LL_TIM_OSSI_STATE(TIM_BDTRInitStruct->OSSIState)); + assert_param(IS_LL_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->LockLevel)); + assert_param(IS_LL_TIM_BREAK_STATE(TIM_BDTRInitStruct->BreakState)); + assert_param(IS_LL_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->BreakPolarity)); + assert_param(IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->AutomaticOutput)); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, TIM_BDTRInitStruct->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, TIM_BDTRInitStruct->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, TIM_BDTRInitStruct->OSSIState); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, TIM_BDTRInitStruct->OSSRState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput); + + /* Set TIMx_BDTR */ + LL_TIM_WriteReg(TIMx, BDTR, tmpbdtr); + + return SUCCESS; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup TIM_LL_Private_Functions TIM Private Functions + * @brief Private functions + * @{ + */ +/** + * @brief Configure the TIMx output channel 1. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); + + /* Set the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NP, TIM_OCInitStruct->OCNPolarity << 2U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NE, TIM_OCInitStruct->OCNState << 2U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1, TIM_OCInitStruct->OCIdleState); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1N, TIM_OCInitStruct->OCNIdleState << 1U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 2. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NP, TIM_OCInitStruct->OCNPolarity << 6U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NE, TIM_OCInitStruct->OCNState << 6U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2, TIM_OCInitStruct->OCIdleState << 2U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2N, TIM_OCInitStruct->OCNIdleState << 3U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 3. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NP, TIM_OCInitStruct->OCNPolarity << 10U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NE, TIM_OCInitStruct->OCNState << 10U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3, TIM_OCInitStruct->OCIdleState << 4U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3N, TIM_OCInitStruct->OCNIdleState << 5U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 4. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS4, TIM_OCInitStruct->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + + +/** + * @brief Configure the TIMx input channel 1. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC1E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC1P | TIM_CCER_CC1NP), + (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 2. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC2P | TIM_CCER_CC2NP), + ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 3. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC3E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC3P | TIM_CCER_CC3NP), + ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 4. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC4E Bit */ + MODIFY_REG(TIMx->CCER, + TIM_CCER_CC4P, + ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 || TIM15 || TIM16 || TIM17 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c b/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c deleted file mode 100644 index 4301d09..0000000 --- a/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c +++ /dev/null @@ -1,438 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_ll_usart.c - * @author MCD Application Team - * @brief USART LL module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_ll_usart.h" -#include "stm32f1xx_ll_rcc.h" -#include "stm32f1xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F1xx_LL_Driver - * @{ - */ - -#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) - -/** @addtogroup USART_LL - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup USART_LL_Private_Constants - * @{ - */ - -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup USART_LL_Private_Macros - * @{ - */ - -/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available - * divided by the smallest oversampling used on the USART (i.e. 8) */ -#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 4500000U) - -/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ -#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) - -#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ - || ((__VALUE__) == LL_USART_DIRECTION_RX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) - -#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ - || ((__VALUE__) == LL_USART_PARITY_EVEN) \ - || ((__VALUE__) == LL_USART_PARITY_ODD)) - -#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \ - || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) - -#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ - || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) - -#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ - || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) - -#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ - || ((__VALUE__) == LL_USART_PHASE_2EDGE)) - -#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ - || ((__VALUE__) == LL_USART_POLARITY_HIGH)) - -#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ - || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) - -#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_1) \ - || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_2)) - -#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USART_LL_Exported_Functions - * @{ - */ - -/** @addtogroup USART_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize USART registers (Registers restored to their default values). - * @param USARTx USART Instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: USART registers are de-initialized - * - ERROR: USART registers are not de-initialized - */ -ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(USARTx)); - - if (USARTx == USART1) - { - /* Force reset of USART clock */ - LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1); - - /* Release reset of USART clock */ - LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1); - } - else if (USARTx == USART2) - { - /* Force reset of USART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); - - /* Release reset of USART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); - } -#if defined(USART3) - else if (USARTx == USART3) - { - /* Force reset of USART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3); - - /* Release reset of USART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); - } -#endif /* USART3 */ -#if defined(UART4) - else if (USARTx == UART4) - { - /* Force reset of UART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4); - - /* Release reset of UART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4); - } -#endif /* UART4 */ -#if defined(UART5) - else if (USARTx == UART5) - { - /* Force reset of UART clock */ - LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5); - - /* Release reset of UART clock */ - LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5); - } -#endif /* UART5 */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Initialize USART registers according to the specified - * parameters in USART_InitStruct. - * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), - * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. - * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). - * @param USARTx USART Instance - * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure - * that contains the configuration information for the specified USART peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: USART registers are initialized according to USART_InitStruct content - * - ERROR: Problem occurred during USART Registers initialization - */ -ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct) -{ - ErrorStatus status = ERROR; - uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; - LL_RCC_ClocksTypeDef rcc_clocks; - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(USARTx)); - assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); - assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); - assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); - assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); - assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); - assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); -#if defined(USART_CR1_OVER8) - assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); -#endif /* USART_OverSampling_Feature */ - - /* USART needs to be in disabled state, in order to be able to configure some bits in - CRx registers */ - if (LL_USART_IsEnabled(USARTx) == 0U) - { - /*---------------------------- USART CR1 Configuration ----------------------- - * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: - * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value - * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value - * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value - * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. - */ -#if defined(USART_CR1_OVER8) - MODIFY_REG(USARTx->CR1, - (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | - USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), - (USART_InitStruct->DataWidth | USART_InitStruct->Parity | - USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); -#else - MODIFY_REG(USARTx->CR1, - (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | - USART_CR1_TE | USART_CR1_RE), - (USART_InitStruct->DataWidth | USART_InitStruct->Parity | - USART_InitStruct->TransferDirection)); -#endif /* USART_OverSampling_Feature */ - - /*---------------------------- USART CR2 Configuration ----------------------- - * Configure USARTx CR2 (Stop bits) with parameters: - * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. - * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). - */ - LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); - - /*---------------------------- USART CR3 Configuration ----------------------- - * Configure USARTx CR3 (Hardware Flow Control) with parameters: - * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value. - */ - LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); - - /*---------------------------- USART BRR Configuration ----------------------- - * Retrieve Clock frequency used for USART Peripheral - */ - LL_RCC_GetSystemClocksFreq(&rcc_clocks); - if (USARTx == USART1) - { - periphclk = rcc_clocks.PCLK2_Frequency; - } - else if (USARTx == USART2) - { - periphclk = rcc_clocks.PCLK1_Frequency; - } -#if defined(USART3) - else if (USARTx == USART3) - { - periphclk = rcc_clocks.PCLK1_Frequency; - } -#endif /* USART3 */ -#if defined(UART4) - else if (USARTx == UART4) - { - periphclk = rcc_clocks.PCLK1_Frequency; - } -#endif /* UART4 */ -#if defined(UART5) - else if (USARTx == UART5) - { - periphclk = rcc_clocks.PCLK1_Frequency; - } -#endif /* UART5 */ - else - { - /* Nothing to do, as error code is already assigned to ERROR value */ - } - - /* Configure the USART Baud Rate : - - valid baud rate value (different from 0) is required - - Peripheral clock as returned by RCC service, should be valid (different from 0). - */ - if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) - && (USART_InitStruct->BaudRate != 0U)) - { - status = SUCCESS; -#if defined(USART_CR1_OVER8) - LL_USART_SetBaudRate(USARTx, - periphclk, - USART_InitStruct->OverSampling, - USART_InitStruct->BaudRate); -#else - LL_USART_SetBaudRate(USARTx, - periphclk, - USART_InitStruct->BaudRate); -#endif /* USART_OverSampling_Feature */ - - /* Check BRR is greater than or equal to 16d */ - assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); - } - } - /* Endif (=> USART not in Disabled state => return ERROR) */ - - return (status); -} - -/** - * @brief Set each @ref LL_USART_InitTypeDef field to default value. - * @param USART_InitStruct Pointer to a @ref LL_USART_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ - -void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) -{ - /* Set USART_InitStruct fields to default values */ - USART_InitStruct->BaudRate = 9600U; - USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; - USART_InitStruct->StopBits = LL_USART_STOPBITS_1; - USART_InitStruct->Parity = LL_USART_PARITY_NONE ; - USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; - USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; -#if defined(USART_CR1_OVER8) - USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; -#endif /* USART_OverSampling_Feature */ -} - -/** - * @brief Initialize USART Clock related settings according to the - * specified parameters in the USART_ClockInitStruct. - * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), - * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. - * @param USARTx USART Instance - * @param USART_ClockInitStruct Pointer to a @ref LL_USART_ClockInitTypeDef structure - * that contains the Clock configuration information for the specified USART peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content - * - ERROR: Problem occurred during USART Registers initialization - */ -ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct) -{ - ErrorStatus status = SUCCESS; - - /* Check USART Instance and Clock signal output parameters */ - assert_param(IS_UART_INSTANCE(USARTx)); - assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); - - /* USART needs to be in disabled state, in order to be able to configure some bits in - CRx registers */ - if (LL_USART_IsEnabled(USARTx) == 0U) - { - /*---------------------------- USART CR2 Configuration -----------------------*/ - /* If Clock signal has to be output */ - if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE) - { - /* Deactivate Clock signal delivery : - * - Disable Clock Output: USART_CR2_CLKEN cleared - */ - LL_USART_DisableSCLKOutput(USARTx); - } - else - { - /* Ensure USART instance is USART capable */ - assert_param(IS_USART_INSTANCE(USARTx)); - - /* Check clock related parameters */ - assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); - assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); - assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); - - /*---------------------------- USART CR2 Configuration ----------------------- - * Configure USARTx CR2 (Clock signal related bits) with parameters: - * - Enable Clock Output: USART_CR2_CLKEN set - * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value - * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value - * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. - */ - MODIFY_REG(USARTx->CR2, - USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, - USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity | - USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); - } - } - /* Else (USART not in Disabled state => return ERROR */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. - * @param USART_ClockInitStruct Pointer to a @ref LL_USART_ClockInitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) -{ - /* Set LL_USART_ClockInitStruct fields with default values */ - USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; - USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ - USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ - USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - - diff --git a/MDK-ARM/motor.uvoptx b/MDK-ARM/motor.uvoptx index e037c0c..3ab2b27 100644 --- a/MDK-ARM/motor.uvoptx +++ b/MDK-ARM/motor.uvoptx @@ -125,7 +125,7 @@ 0 CMSIS_AGDI - -X"Any" -UAny -O206 -S0 -C0 -P00000000 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO65554 -TC10000000 -TT10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) 0 @@ -148,7 +148,56 @@ - + + + 0 + 0 + 241 + 1 +
134220930
+ 0 + 0 + 0 + 0 + 0 + 1 + ../Core/Src/stm32f1xx_it.c + + \\motor\../Core/Src/stm32f1xx_it.c\241 + + + 1 + 0 + 47 + 1 +
0
+ 0 + 0 + 0 + 0 + 0 + 0 + startup_stm32f103xb.s + + + + + 2 + 0 + 255 + 1 +
0
+ 0 + 0 + 0 + 0 + 0 + 0 + startup_stm32f103xb.s + + + + 0 @@ -191,6 +240,12 @@ + + + System Viewer\TIM4 + 35905 + + @@ -251,8 +306,8 @@ 0 0 0 - ../Core/Src/dma.c - dma.c + ../Core/Src/tim.c + tim.c 0 0 @@ -263,18 +318,6 @@ 0 0 0 - ../Core/Src/usart.c - usart.c - 0 - 0 - - - 2 - 6 - 1 - 0 - 0 - 0 ../Core/Src/stm32f1xx_it.c stm32f1xx_it.c 0 @@ -290,7 +333,7 @@ 0 3 - 7 + 6 1 0 0 @@ -310,7 +353,7 @@ 0 4 - 8 + 7 1 0 0 @@ -330,7 +373,7 @@ 0 5 - 9 + 8 1 0 0 @@ -342,7 +385,7 @@ 5 - 10 + 9 1 0 0 @@ -354,7 +397,7 @@ 5 - 11 + 10 1 0 0 @@ -366,7 +409,7 @@ 5 - 12 + 11 1 0 0 @@ -378,7 +421,7 @@ 5 - 13 + 12 1 0 0 @@ -390,7 +433,7 @@ 5 - 14 + 13 1 0 0 @@ -402,7 +445,7 @@ 5 - 15 + 14 1 0 0 @@ -414,7 +457,7 @@ 5 - 16 + 15 1 0 0 @@ -434,7 +477,7 @@ 0 6 - 17 + 16 1 0 0 @@ -446,7 +489,7 @@ 6 - 18 + 17 1 0 0 @@ -458,7 +501,7 @@ 6 - 19 + 18 1 0 0 @@ -470,7 +513,7 @@ 6 - 20 + 19 1 0 0 @@ -482,7 +525,7 @@ 6 - 21 + 20 1 0 0 @@ -494,7 +537,7 @@ 6 - 22 + 21 1 0 0 @@ -506,7 +549,7 @@ 6 - 23 + 22 1 0 0 @@ -518,7 +561,7 @@ 6 - 24 + 23 1 0 0 @@ -530,7 +573,7 @@ 6 - 25 + 24 1 0 0 @@ -542,7 +585,7 @@ 6 - 26 + 25 1 0 0 @@ -554,7 +597,7 @@ 6 - 27 + 26 1 0 0 @@ -566,7 +609,7 @@ 6 - 28 + 27 1 0 0 @@ -578,7 +621,7 @@ 6 - 29 + 28 1 0 0 @@ -590,7 +633,7 @@ 6 - 30 + 29 1 0 0 @@ -602,7 +645,7 @@ 6 - 31 + 30 1 0 0 @@ -622,7 +665,7 @@ 0 7 - 32 + 31 1 0 0 @@ -634,19 +677,7 @@ 7 - 33 - 1 - 0 - 0 - 0 - ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c - stm32f1xx_ll_dma.c - 0 - 0 - - - 7 - 34 + 32 1 0 0 @@ -658,7 +689,7 @@ 7 - 35 + 33 1 0 0 @@ -670,19 +701,31 @@ 7 - 36 + 34 1 0 0 0 - ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c - stm32f1xx_ll_usart.c + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c + stm32f1xx_ll_tim.c 0 0 7 - 37 + 35 + 1 + 0 + 0 + 0 + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c + stm32f1xx_ll_dma.c + 0 + 0 + + + 7 + 36 1 0 0 @@ -694,7 +737,7 @@ 7 - 38 + 37 1 0 0 @@ -714,7 +757,7 @@ 0 8 - 39 + 38 1 0 0 @@ -726,7 +769,7 @@ 8 - 40 + 39 1 0 0 diff --git a/MDK-ARM/motor.uvprojx b/MDK-ARM/motor.uvprojx index 1f5c832..8a50db2 100644 --- a/MDK-ARM/motor.uvprojx +++ b/MDK-ARM/motor.uvprojx @@ -18,12 +18,12 @@ STMicroelectronics Keil.STM32F1xx_DFP.1.1.0 http://www.keil.com/pack/ - IRAM(0x20000000,0x5000) IROM(0x08000000,0x10000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE + IRAM(0x20000000,0x2800) IROM(0x08000000,0x8000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE - UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)) + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103T6$Flash\STM32F10x_128.FLM)) 0 - $$Device:STM32F103C8$Device\Include\stm32f10x.h + $$Device:STM32F103T6$Device\Include\stm32f10x.h @@ -33,7 +33,7 @@ - $$Device:STM32F103C8$SVD\STM32F103xx.svd + $$Device:STM32F103T6$SVD\STM32F103xx.svd 0 0 @@ -246,12 +246,12 @@ 0 0x20000000 - 0x5000 + 0x2800 1 0x8000000 - 0x10000 + 0x8000 0 @@ -276,7 +276,7 @@ 1 0x8000000 - 0x10000 + 0x8000 1 @@ -301,7 +301,7 @@ 0 0x20000000 - 0x5000 + 0x2800 0 @@ -404,65 +404,9 @@ ../Core/Src/gpio.c - dma.c + tim.c 1 - ../Core/Src/dma.c - - - 2 - 0 - 0 - 0 - 0 - 1 - 2 - 2 - 2 - 2 - 11 - - - 1 - - - - 2 - 0 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 0 - 2 - 2 - 2 - 2 - 2 - 0 - 0 - 2 - 2 - 2 - 2 - 2 - - - - - - - - - - - - usart.c - 1 - ../Core/Src/usart.c + ../Core/Src/tim.c 2 @@ -579,6 +523,57 @@ uarts.c 1 ..\User\system\bsp\uarts.c + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + i2cs.c @@ -795,62 +790,6 @@ - - stm32f1xx_ll_dma.c - 1 - ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c - - - 2 - 0 - 0 - 0 - 0 - 1 - 2 - 2 - 2 - 2 - 11 - - - 1 - - - - 2 - 0 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 0 - 2 - 2 - 2 - 2 - 2 - 0 - 0 - 2 - 2 - 2 - 2 - 2 - - - - - - - - - - stm32f1xx_ll_pwr.c 1 @@ -964,9 +903,65 @@ - stm32f1xx_ll_usart.c + stm32f1xx_ll_tim.c 1 - ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_tim.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 2 + 2 + 2 + 2 + 11 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32f1xx_ll_dma.c + 1 + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c 2 diff --git a/MDK-ARM/motor/motor.hex b/MDK-ARM/motor/motor.hex index 24ec225..ed0fae5 100644 --- a/MDK-ARM/motor/motor.hex +++ b/MDK-ARM/motor/motor.hex @@ -1,361 +1,300 @@ :020000040800F2 -:100000006018002005010008690800089701000831 -:100010006508000871010008A50A0008000000003A -:10002000000000000000000000000000AD09000812 -:100030009501000800000000AF080008AF090008A3 -:100040001F010008AD0800081F0100081F0100087B +:100000008018002005010008A905000893010008D8 +:10001000A505000871010008A907000800000000FC +:10002000000000000000000000000000AF05000814 +:100030009101000800000000AD050008B1050008AE +:100040001F0100081F0100081F0100081F01000810 :100050001F0100081F0100081F0100081F01000800 :100060001F0100081F0100081F0100081F010008F0 -:100070001F0100081F0100089101000893010008FA +:100070001F0100081F0100081F0100081F010008E0 :100080001F0100081F0100081F0100081F010008D0 :100090001F0100081F0100081F0100081F010008C0 :1000A0001F0100081F0100081F0100081F010008B0 -:1000B0001F0100081F0100081F0100081F010008A0 +:1000B000A90600081F0100081F0100081F01000811 :1000C0001F0100081F0100081F0100081F01000890 -:1000D0001F010008A30A00081F0100081F010008F3 +:1000D0001F0100081F0100081F0100081F01000880 :1000E0001F0100081F0100081F010008DFF810D0E1 -:1000F00000F02CF8004800475D110008AFF30080C5 -:10010000601800200648804706480047FEE7FEE7E3 +:1000F00000F02CF800480047350E0008AFF30080F0 +:10010000801800200648804706480047FEE7FEE7C3 :10011000FEE7FEE7FEE7FEE7FEE7FEE7FEE7FEE7B7 -:10012000A10A0008ED000008D2B201E000F8012B9E +:10012000A5060008ED000008D2B201E000F8012B9E :10013000491EFBD270470022F6E710B513460A4667 :1001400004461946FFF7F0FF204610BD064C074D48 :1001500006E0E06840F0010394E807009847103497 -:10016000AC42F6D3FFF7C6FFE815000808160008F2 +:10016000AC42F6D3FFF7C6FFF811000818120008DA :1001700000BFFEE770B504460D4600BF2CB901F084 -:10018000E9F901E000BF00BFFCE700BF012070BD3E -:1001900070477047704700BFFEE7000008B505498B -:1001A00089690143034A91611146896901400091BF -:1001B00000BF08BD0010024008B505498969014328 -:1001C000034A9161114689690140009100BF08BD51 -:1001D0000010024030B54B1E054CE35CC35823F4BD -:1001E000405313434C1E024D2C5D035130BD0000A3 -:1001F0009815000830B54B1E054CE35CC35844F21B -:100200001004A34313434C1E014D2C5D035130BD1C -:100210009815000830B54B1E054CE35CC35823F01D -:10022000800313434C1E024D2C5D035130BD000072 -:100230009815000830B54B1E054CE35CC35823F4F9 -:10024000406313434C1E024D2C5D035130BD000032 -:100250009815000830B54B1E054CE35CC35823F0DD -:10026000200313434C1E024D2C5D035130BD000092 -:100270009815000830B54B1E054CE35CC35823F0BD -:10028000400313434C1E024D2C5D035130BD000052 -:100290009815000830B54B1E054CE35CC35823F499 -:1002A000407313434C1E024D2C5D035130BD0000C2 -:1002B000981500082DE9F04102460B461868C0F376 -:1002C0000F2595FAA5F0B0FA80F480E00120A04057 -:1002D000284000287AD0082C04D240F2011000FAFD -:1002E00004F106E0A4F108004FF00116864046F044 -:1002F0008061586808280ED11869D66826EA112648 -:100300000F0A97FAA7F7B7FA87F700FA07F73E43FD -:10031000D66000BF00BF586802EB116691FAA1FCDD -:10032000BCFA8CFC4FEA8C084FF00F0C0CFA08FC5E -:10033000376827EA0C0791FAA1FCBCFA8CFC4FEA5B -:100340008C0C00FA0CFC47EA0C07376000BF5868B9 -:10035000012802D05868092838D1986802EB116644 -:1003600091FAA1FCBCFA8CFC4FEA8C084FF0030C0C -:100370000CFA08FC376827EA0C0791FAA1FCBCFAD2 -:100380008CFC4FEA8C0C00FA0CFC47EA0C07376037 -:1003900000BFD86802EB116691FAA1FCBCFA8CFC94 -:1003A0004FEA8C084FF0040C0CFA08FC376827EA77 -:1003B0000C0791FAA1FCBCFA8CFC4FEA8C0C00FAF9 -:1003C0000CFC47EA0C07376000BF00BF641C25FA2D -:1003D00004F000287FF47AAFBDE8F081C1F30F226A -:1003E000426170474FF47A71B0FBF1F2521E4FF048 -:1003F000E0235A6100229A6105221A6100BF70470A -:1004000010B5044600F088FA2060206800F050FA29 -:100410006060606800F05CFAA060606800F06AFAF2 -:10042000E06010BD01490860704700000000002036 -:100430002DE9FF4104460D4601270026204600F025 -:1004400041F8002833D1E9686868084329690843FE -:10045000E16841F20C6291430843E060A8682169B9 -:1004600021F440510143216100BF6869616921F4B1 -:1004700040710143616100BF6846FFF7C1FF0E484C -:10048000844201D1039E08E00C48844201D1029EBF -:1004900003E00B48844200D1029E46B1286830B187 -:1004A0000027314620462A6800F011F800BF384680 -:1004B00004B0BDE8F0810000003801400044004075 -:1004C000004800400146C868C0F34030704770B52E -:1004D00001EBC10303EB01139400B3FBF4F301EB55 -:1004E000C10404EB01149500B4FBF5F46425B4FBDE -:1004F000F5F404EBC40505EB0414A3EB84033224E8 -:1005000004EB03136424B3FBF4F303F0F00301EBF7 -:10051000C10404EB01149500B4FBF5F46425B4FBAD -:10052000F5F403EB041401EBC10303EB0113950095 -:10053000B3FBF5F301EBC10505EB01159600B5FB27 -:10054000F6F56426B5FBF6F505EBC50606EB0515D5 -:10055000A3EB8503322505EB03136425B3FBF5F309 -:1005600003F00F0323449BB2836070BD38B50120B4 -:10057000144949690143134A5161114649690140CF -:10058000009100BF00BF00F09DFA05460022114611 -:1005900000F06CF9044621460E2000F09BFA0E2074 -:1005A00000F082FA00F08EFA05460022114600F0B3 -:1005B0005DF9044621460F2000F08CFA0F2000F070 -:1005C00073FA38BD0010024000B585B014216846AA -:1005D000FFF7B1FD1020FFF7E1FD2020FFF7DEFD62 -:1005E0000420FFF7DBFD0820FFF7D8FD1C491D485C -:1005F000FFF7F4FE1C491D48FFF7F0FE1848009075 -:1006000001200190022002900020039069461548C5 -:10061000FFF750FE164800900020019069461148EF -:10062000FFF748FE134800900020019069461248E9 -:10063000FFF740FE114800900020019069460B48EA -:10064000FFF738FE08480090012001900220029038 -:100650000020039069460548FFF72CFE05B000BD59 -:10066000200020040010014030003004000C014044 -:10067000C000C004FFFF990400080140FFFFCF0441 -:100680002DE9F0418CB01C2105A8FFF754FD142181 -:100690006846FFF750FD4FF48040FFF78DFD0420C2 -:1006A000FFF78AFD6848009009200190032002901E -:1006B0000020039069466548FFF7FCFD6448009000 -:1006C0000420019069466148FFF7F4FD00220521EE -:1006D0006048FFF78FFD002205215E48FFF77AFD95 -:1006E000002205215B48FFF7B5FD0022052159488E -:1006F000FFF7C0FD802205215648FFF78BFD002241 -:1007000005215448FFF7C6FD002205215148FFF797 -:1007100091FD102204214F48FFF76CFD00220421B7 -:100720004C48FFF757FD002204214A48FFF792FD8D -:10073000002204214748FFF79DFD802204214548FF -:10074000FFF768FD002204214248FFF7A3FD0022C5 -:1007500004214048FFF76EFD25213F4B1B68C3F382 -:100760000220002425460346C3F1070CBCF1040F08 -:1007700002D94FF0040C01E0C3F1070C674603F106 -:10078000040CBCF1070F02D24FF0000C01E0A3F102 -:10079000030C66464FF0010C0CFA07FCACF1010C9F -:1007A0000CEA040C0CFA06FC4FF0010808FA06F8F3 -:1007B000A8F1010808EA05084CEA080200BF002970 -:1007C00004DB1007030E2548435407E01007040E0E -:1007D00021480C3001F00F031B1FC45400BF25201B -:1007E000002809DB00F01F0201219140420992001C -:1007F00002F1E022C2F8001100BF4FF4E130059091 -:1008000000200690079008900C20099000200A9084 -:100810000B9005A91248FFF70BFE00BF10480069B6 -:1008200020F490400E4908610846406920F02A00F3 -:10083000486100BF00BF0846C06840F40050C8606F -:1008400000BF0CB0BDE8F0810200020400080140C6 -:1008500004000404000002400CED00E000E400E0AD -:100860000038014000BFFEE700BFFEE7F0B50346D9 -:100870000C4603F00701C1F10700042801D9042048 -:1008800001E0C1F107000646081D072801D200203B -:1008900000E0C81E05460120B040401E2040A84090 -:1008A0000127AF407F1E17403843F0BD70477047A7 -:1008B000014600BF0448406800F0F0000009034A08 -:1008C000125C21FA02F07047001002409F150008E8 -:1008D000014600BF0548406800F4E060044A02EBAE -:1008E0001020027821FA02F0704700000010024048 -:1008F000AF150008014600BF0548406800F460508D -:10090000044A02EBD020027821FA02F0704700007E -:1009100000100240AF15000810B5002400BF0B48BE -:10092000406800F00C0020B1042804D0082808D149 -:1009300003E0074C07E0064C05E000F00BF8044626 -:1009400001E0034C00BF00BF204610BD0010024074 -:1009500000127A000021002200BF1148406800F414 -:10096000803002461AB1B2F5803F0CD101E00D494A -:100970000BE000BF0A484068C0F34040401C0A4BEF -:10098000B3FBF0F101E0074900BF00BF00BF04481E -:10099000406800F47010022303EB90404843704716 -:1009A0000010024000093D0000127A0070477047B5 -:1009B00010B502203749096821F007010143354A83 -:1009C000116000BF00BF00BF3248006800F00700A0 -:1009D0000228F8D100BF3048006840F480302E492A -:1009E000086000BF00BF00BF2B480068C0F3404054 -:1009F0000028F8D04FF480304FF4E011264A5268B6 -:100A000022F47C1200F440330B431A43224B5A6009 -:100A100000BF00BF1846006840F0807019460860AB -:100A200000BF00BF00BF1C480068C0F34060002842 -:100A3000F8D000201849496821F0F0010143164A16 -:100A4000516000BF10151146496821F4E06101436F -:100A5000516000BF00201146496821F460510143F4 -:100A6000516000BF02201146496821F00301014393 -:100A7000516000BF00BF00BF0748406800F00C0095 -:100A80000828F8D10548FFF7ADFC0448FFF7CAFC79 -:100A900010BD0000002002400010024000A24A04E5 -:100AA0007047704700BFFEE7002809DB00F01F0217 -:100AB000012191404209920002F1E022C2F80011A6 -:100AC0007047000002480068C0F302207047000031 -:100AD0000CED00E010B5002804DB0A07130E054AF0 -:100AE000135406E00A07140E034A00F00F031B1FFD -:100AF000D45410BD00E400E018ED00E002E008C8A6 -:100B0000121F08C1002AFAD170477047002001E087 -:100B100001C1121F002AFBD170472DE9FC41044698 -:100B20000CB1012100E00021084640F26F21FFF7DF -:100B300021FB25462C462E686F68D7E90401CDE9D4 -:100B400000016868D0F80CC097E80F00E047204625 -:100B500000F05CFAD6E90401CDE900012868D0F87C -:100B600008C096E80F00E047204600F04FFAD6E9AB -:100B70000401CDE900012868D0F80CC096E80F0008 -:100B8000E047BDE8FC810000014601F1100000E0F3 -:100B9000001D02681AB9024A12689042F8D37047E1 -:100BA0001000002010B50648046803E02046FFF757 -:100BB000EBFF0446034800688442F7D310BD0000F1 -:100BC0000C000020100000202DE9FC4104460CB16F -:100BD000012100E00021084640F28B21FFF7CAFA0C -:100BE00025462C462E686F68D7E90401CDE900013F -:100BF0006868D0F808C097E80F00E047204600F08A -:100C000005FAD6E90401CDE900012868D0F808C04A -:100C100096E80F00E047204600F0F8F9D6E9040115 -:100C2000CDE900012868D0F80CC096E80F00E04735 -:100C3000BDE8FC810FB4DDE900108A68C0F30F2322 -:100C40001A40C0F30F239A4201D1012200E0002292 -:100C5000D0B204B070472DE9FC47054689460DB176 -:100C6000012100E0002108465F21FFF783FA4FF0E1 -:100C7000000AD0462C462668676800BF3AE0D7E9EC -:100C80000401CDE900016068D0F808C097E80F00C2 -:100C9000E047D6E90401CDE900012068D0F808C09A -:100CA00096E80F00E0474FEA48604FEA1068284690 -:100CB00000F0ACF9D7E90401CDE900016068D0F893 -:100CC00014C097E80F00E04718B108F1010000F0E8 -:100CD000FF08D6E90401CDE900012068D0F80CC076 -:100CE00096E80F00E047284600F090F90AF101006D -:100CF00000F0FF0ABAF1080FC1DBB9F1010F03D10F -:100D00002846FFF70AFF02E02846FFF75DFF40464E -:100D1000BDE8FC870FB4DDE90001C1F30F22426199 -:100D200000BF04B070470FB4DDE90001C1F30F222A -:100D3000026100BF04B070472DE9FC4104460CB1CC -:100D4000012100E0002108460F21FFF713FA254694 -:100D50002C462E686F68D7E90401CDE90001686868 -:100D6000D0F808C097E80F00E047D6E90401CDE9C4 -:100D700000012868D0F808C096E80F00E047204638 -:100D800000F044F9D7E90401CDE900016868D0F822 -:100D90000CC097E80F00E047204600F037F9D6E98D -:100DA0000401CDE900012868D0F80CC096E80F00D6 -:100DB000E047204600F02AF9BDE8FC812DE9FC411E -:100DC00004460CB1012100E0002108462D21FFF767 -:100DD000D1F925462C462E686F68D6E90401CDE985 -:100DE00000012868D0F80CC096E80F00E047D7E96A -:100DF0000401CDE900016868D0F80CC097E80F0045 -:100E0000E047204600F002F9D6E90401CDE90001EF -:100E10002868D0F808C096E80F00E047D7E9040139 -:100E2000CDE900016868D0F808C097E80F00E047F6 -:100E3000204600F0EBF8BDE8FC810FB430B5DDE9E9 -:100E40000301C268C1F30F2323EA020402EA030587 -:100E500044EA0544046100BF30BC5DF814FB2DE991 -:100E6000FC4104460CB1012100E00021084640216C -:100E7000FFF780F94FF0000825462C462E686F6872 -:100E8000D7E90401CDE900016868D0F808C097E807 -:100E90000F00E047D6E90401CDE900012868D0F849 -:100EA00008C096E80F00E047204600F0AFF80CE0DD -:100EB00008F1010000F0FF08B8F1FA0F05DD204647 -:100EC000FFF77CFF0020BDE8FC81D7E90401CDE9F4 -:100ED00000016868D0F814C097E80F00E0470028C8 -:100EE000E6D1D6E90401CDE900012868D0F80CC0AC -:100EF00096E80F00E047204600F088F80120E2E77E -:100F00002DE9FC47064688464FF000090EB1012145 -:100F100000E0002108468821FFF72CF934462768B5 -:100F200065684FF0000946E008F0800050B1D5E94F -:100F30000401CDE900016068D0F808C095E80F0011 -:100F4000E04709E0D5E90401CDE900016068D0F887 -:100F50000CC095E80F00E047D7E90401CDE9000196 -:100F60002068D0F808C097E80F00E047304600F04E -:100F70004DF84FEA48604FEA1068D7E90401CDE91F -:100F800000012068D0F80CC097E80F00E047304619 -:100F900000F03CF8B9F1070F09D1D5E90401CDE91A -:100FA00000016068D0F808C095E80F00E04709F13B -:100FB000010000F0FF09B9F1080FB5DBBDE8FC87BF -:100FC00070B506460D4600240BE0E00045FA00F03F -:100FD000C1B23046FFF794FF3046FFF740FF601C78 -:100FE000C4B2022CF1DB70BD0020014908607047DB -:100FF0000400002010B5024800F07AF810BD00008F -:101000000400002010B500F0FBF910BD70B50446D7 -:101010000CB1012100E00021084640F25921FFF700 -:10102000A9F80025258900E000BF281EA5F10101CF -:101030008DB2F9D170BD00002DE9F04105460E4694 -:1010400018273946002000F0BDF904460CB10121F3 -:1010500000E0002108463621FFF78CF82560666025 -:101060000548A0600548E0600548206105486061CA -:101070002046BDE8F0810000270D0008150D00088E -:101080003B0E0008350C0008F7B515465C263146C6 -:10109000002000F097F9044620466946082203E044 -:1010A00011F8013B00F8013B131EA2F10106B2B298 -:1010B000F6D100BF25810848A0630849E1630849CB -:1010C00021640849A164084961640849E164002079 -:1010D000A4F858002046FEBD390D0008BD0D0008DB -:1010E0005F0E0008570C0008010F0008C10F000830 -:1010F00038B5014600200090086810B1142821D1AD -:1011000016E000BF124B134CE068C3F30F2222EA33 -:10111000000400EA020544EA05440E4D2C6100BFBC -:1011200000BF0D480068486000BF1420086000BF81 -:10113000094A48681268101A642801D2002038BD94 -:1011400000BFDFE70020086000900320F7E7000001 -:1011500020002004001001404000002008B50120BC -:10116000484989690143474A9161114689690140AB -:10117000009100BF00BF00071146C9690143D1615A -:101180001146C9690140009100BF00BF032002461B -:101190003D4B19684FF6FF0319403C4B0B4343EAA4 -:1011A0000221394B196000BF01211B68C3F30220E3 -:1011B000002425460346C3F1070CBCF1040F02D9F5 -:1011C0004FF0040C01E0C3F1070C674603F1040C77 -:1011D000BCF1070F02D24FF0000C01E0A3F1030CA9 -:1011E00066464FF0010C0CFA07FCACF1010C0CEA5E -:1011F000040C0CFA06FC4FF0010808FA06F8A8F1F6 -:10120000010808EA05084CEA080200BF002904DBCF -:101210001007030E1E48435407E01007040E1A4837 -:101220000C3001F00F031B1FC45400BF0120002825 -:1012300009DB00F01F02012191404209920002F1F6 -:10124000E022C2F8001100BF00BF1248406820F041 -:10125000E06040F000700F49486000BFFFF7A8FB56 -:10126000FFF7B2F9FFF782F9FFF70AFA002000F062 -:1012700013F8FFF7C7FEFFF7B7FE01E0FFF7BAFE6E -:10128000FCE70000001002400CED00E00000FA0551 -:1012900000E400E00000014010B504460C4951F89C -:1012A00024104A000B4951F82400002100F09EF858 -:1012B000094951F824200749083951F82400002130 -:1012C00000F094F8012103480830015510BD0000DA -:1012D000D015000834000020E01500082DE9F04783 -:1012E00004460F460025A9462348005D20B9224840 -:1012F00018380168204688471FB94FF0FF30BDE815 -:10130000F0871E4850F82400B7FBF0F61B4850F851 -:101310002400B7FBF0F100FB117000B1761C1848F7 -:1013200050F82400451E22E01348083850F82400E5 -:1013300030F8150010B909F1010901E04FF000097A -:10134000B14513D14FF0000809E00B48083850F8B8 -:10135000240005EB080220F8126008F10108B045EE -:10136000F3D3064850F824006843C8E76D1E002DEB -:10137000DADA4FF0FF30C2E73C000020D815000851 -:10138000D015000810B501460023002207E00B48E5 -:1013900050F8210030F8120000B15B1C521C0848C4 -:1013A00050F821009042F2D864205843044C54F87D -:1013B0002140B0FBF4F0C0B210BD000034000020AA -:1013C000D015000870B504460E4631462046FFF79A -:1013D00085FF0546681C08B9002070BD024850F81A -:1013E00024002844F9E700002C00002030B5034613 -:1013F00001E003F8011B141EA2F10102F9D130BD76 -:101400001CB52F492F48FFF717FE00902E492D4895 -:10141000FFF712FE01900022DDE90001FFF734FE24 -:101420002A490860AE2000F055F8D52000F052F8A7 -:10143000802000F04FF8A82000F04CF83F2000F08A -:1014400049F8D32000F046F8002000F043F840208F -:1014500000F040F88D2000F03DF8142000F03AF83C -:10146000202000F037F8002000F034F8A12000F030 -:1014700031F8C82000F02EF8DA2000F02BF8122006 -:1014800000F028F8812000F025F8CF2000F022F8A5 -:10149000D92000F01FF8F12000F01CF8DB2000F04C -:1014A00019F8402000F016F8A42000F013F8A62048 -:1014B00000F010F8AF2000F00DF800F009F81CBDA6 -:1014C00020002004000C0140100010044400002003 -:1014D0007047000038B5044600208DF800008DF8F4 -:1014E00001401B480068816B19480068884718480C -:1014F00000687821426C16480068904714480068DC -:10150000016C1348006888479DF800101048006877 -:10151000426C0F48006890470D480068016C0C4809 -:10152000006888479DF8011009480068426C084827 -:101530000068904706480068016C054800688847C5 -:1015400003480068C16B02480068884738BD000046 -:101550004400002000BF00BF00BF00BF00BFBFF3BA -:101560004F8F00BF00BF00BF0948006800F4E06073 -:1015700008490843001D0649086000BF00BF00BFBE -:10158000BFF34F8F00BF00BF00BF00BF00BFFDE72C -:101590000CED00E00000FA05081C3044586C800097 -:1015A0000000000000000001020304060708090013 -:1015B000000000010203045F6C697374006C6973BE -:1015C0007420616C6C20636F6D6D616E640000004F -:1015D00000020000000000000800000008000000F9 -:1015E00000100000000000000816000800000020A5 -:1015F00058000000FC0A000860160008580000208F -:10160000081800000C0B00080024F4000000000083 -:1016100000000000000000000000000000000000CA -:101620000000000000000000000000009912000807 -:1016300085130008600000202000002060100020BA -:101640002200002000000000000000000000000058 -:10165000B7150008BD150008C6E533B4A50B000892 +:1001800001F801E000BF00BFFCE700BF012070BD27 +:10019000704700BFFEE7000008B5054989690143C3 +:1001A000034A9161114689690140009100BF08BD71 +:1001B000001002402DE9F04102460B461868C0F3DA +:1001C0000F2595FAA5F0B0FA80F480E00120A04058 +:1001D000284000287AD0082C04D240F2011000FAFE +:1001E00004F106E0A4F108004FF00116864046F045 +:1001F0008061586808280ED11869D66826EA112649 +:100200000F0A97FAA7F7B7FA87F700FA07F73E43FE +:10021000D66000BF00BF586802EB116691FAA1FCDE +:10022000BCFA8CFC4FEA8C084FF00F0C0CFA08FC5F +:10023000376827EA0C0791FAA1FCBCFA8CFC4FEA5C +:100240008C0C00FA0CFC47EA0C07376000BF5868BA +:10025000012802D05868092838D1986802EB116645 +:1002600091FAA1FCBCFA8CFC4FEA8C084FF0030C0D +:100270000CFA08FC376827EA0C0791FAA1FCBCFAD3 +:100280008CFC4FEA8C0C00FA0CFC47EA0C07376038 +:1002900000BFD86802EB116691FAA1FCBCFA8CFC95 +:1002A0004FEA8C084FF0040C0CFA08FC376827EA78 +:1002B0000C0791FAA1FCBCFA8CFC4FEA8C0C00FAFA +:1002C0000CFC47EA0C07376000BF00BF641C25FA2E +:1002D00004F000287FF47AAFBDE8F081C1F30F226B +:1002E0004261704702480068401C0149086070473D +:1002F0000C0000204FF47A71B0FBF1F2521E4FF067 +:10030000E0235A6100229A6105221A6100BF7047FA +:1003100001490860704700000000002010B5024647 +:1003200013681C48824208D0B2F1804F05D01A48A9 +:10033000824202D01948824204D123F070004C68F6 +:1003400040EA04031348824208D0B2F1804F05D03E +:100350001148824202D01148824204D123F44070F5 +:10036000CC6840EA040313608868D06200BF088844 +:10037000906200BF0748824203D10869106300BF42 +:1003800000BF00BF506940F00100506100BF002075 +:1003900010BD0000002C0140000400400008004097 +:1003A0000146086900F001007047000000B585B003 +:1003B00014216846FFF7BFFE1020FFF7EDFE202056 +:1003C000FFF7EAFE0420FFF7E7FE0820FFF7E4FE50 +:1003D0001C491D48FFF782FF1C491D48FFF77EFF9F +:1003E0001848009001200190022002900020039004 +:1003F00069461548FFF7DEFE164800900020019080 +:1004000069461148FFF7D6FE13480090002001907E +:1004100069461248FFF7CEFE114800900020019077 +:1004200069460B48FFF7C6FE08480090012001907E +:10043000022002900020039069460548FFF7BAFEAB +:1004400005B000BD20002004001001403000300441 +:10045000000C0140C000C004FFFF9F0400080140E1 +:10046000FFFFCF042DE9F04186B0142101A8FFF76A +:1004700062FE01204849C9690143474AD1611146DA +:10048000C9690140009100BF00BF1C21434B1B689C +:10049000C3F302200F2400250346C3F1070CBCF16F +:1004A000040F02D94FF0040C01E0C3F1070C6746BA +:1004B00003F1040CBCF1070F02D24FF0000C01E075 +:1004C000A3F1030C66464FF0010C0CFA07FCACF1EB +:1004D000010C0CEA040C0CFA06FC4FF0010808FAB7 +:1004E00006F8A8F1010808EA05084CEA080200BF6E +:1004F000002904DB1007030E2948435407E01007C6 +:10050000040E26480C3001F00F031B1FC45400BF1B +:100510001C20002809DB00F01F0201219140420944 +:10052000920002F1E022C2F8001100BF41F61F4024 +:10053000ADF8040000200290632003900020049096 +:1005400001A94FF08040FFF7E9FE00BF4FF0804067 +:10055000006820F080004FF08041086000BF00205C +:10056000896844F20702914301434FF08042916051 +:1005700000BF00BF1146496821F07001014351607E +:1005800000BF00BF1046806820F0800011468860E0 +:1005900000BF06B0BDE8F081001002400CED00E0A5 +:1005A00000E400E000BFFEE700BFFEE770477047D1 +:1005B0007047000010B502203749096821F0070193 +:1005C0000143354A116000BF00BF00BF32480068D8 +:1005D00000F007000228F8D100BF3048006840F45E +:1005E00080302E49086000BF00BF00BF2B48006864 +:1005F000C0F340400028F8D04FF480304FF4E011B1 +:10060000264A526822F47C1200F440330B431A430A +:10061000224B5A6000BF00BF1846006840F080704F +:100620001946086000BF00BF00BF1C480068C0F347 +:1006300040600028F8D000201849496821F0F001F6 +:100640000143164A516000BF10151146496821F454 +:10065000E0610143516000BF00201146496821F468 +:1006600060510143516000BF02201146496821F0EA +:1006700003010143516000BF00BF00BF074840684D +:1006800000F00C000828F8D10548FFF733FE0448B5 +:10069000FFF73EFE10BD00000020024000100240A7 +:1006A00000A24A047047000010B54FF08040FFF7E9 +:1006B00077FE012874D100BF00BF80070069C0F336 +:1006C000400068B100BF4FF08040C068C0F34000F8 +:1006D00030B100BF6FF002008107086100BF00BFAA +:1006E00000BF4FF080400069C0F3800070B100BFD0 +:1006F0004FF08040C068C0F3800038B100BF6FF099 +:1007000004004FF08041086100BF00BF00BF4FF000 +:1007100080400069C0F3C00070B100BF4FF080405E +:10072000C068C0F3C00038B100BF6FF008004FF0E0 +:100730008041086100BF00BF00BF4FF080400069EA +:10074000C0F3001070B100BF4FF08040C068C0F32C +:10075000001038B100BF6FF010004FF08041086109 +:1007600000BF00BF4FF08040FFF71AFE01280DD1F7 +:1007700000BF8007C06800F0010038B100BF6FF013 +:1007800001004FF08041086100BF00BF00BFFFF7CC +:10079000A9FD00BF03480068401C0249086000BF73 +:1007A00010BD00006000002000BFFEE702E008C8A6 +:1007B000121F08C1002AFAD170477047002001E0DB +:1007C00001C1121F002AFBD170472DE9FC410446EC +:1007D0000CB1012100E00021084640F26F21FFF733 +:1007E000C9FC25462C462E686F68D7E90401CDE97F +:1007F00000016868D0F80CC097E80F00E047204679 +:1008000000F070FAD6E90401CDE900012868D0F8BB +:1008100008C096E80F00E047204600F063FAD6E9EA +:100820000401CDE900012868D0F80CC096E80F005B +:10083000E047BDE8FC810000014601F1100000E046 +:10084000001D02681AB9024A12689042F8D3704734 +:100850002000002010B50648046803E02046FFF79A +:10086000EBFF0446034800688442F7D310BD000044 +:100870001C000020200000202DE9FC4104460CB1A2 +:10088000012100E00021084640F28B21FFF772FCB5 +:1008900025462C462E686F68D7E90401CDE9000192 +:1008A0006868D0F808C097E80F00E047204600F0DD +:1008B00019FAD6E90401CDE900012868D0F808C08A +:1008C00096E80F00E047204600F00CFAD6E9040154 +:1008D000CDE900012868D0F80CC096E80F00E04789 +:1008E000BDE8FC810FB4DDE900108A68C0F30F2376 +:1008F0001A40C0F30F239A4201D1012200E00022E6 +:10090000D0B204B070472DE9FC47054689460DB1C9 +:10091000012100E0002108465F21FFF72BFC4FF08A +:10092000000AD0462C462668676800BF3AE0D7E93F +:100930000401CDE900016068D0F808C097E80F0015 +:10094000E047D6E90401CDE900012068D0F808C0ED +:1009500096E80F00E0474FEA48604FEA10682846E3 +:1009600000F0C0F9D7E90401CDE900016068D0F8D2 +:1009700014C097E80F00E04718B108F1010000F03B +:10098000FF08D6E90401CDE900012068D0F80CC0C9 +:1009900096E80F00E047284600F0A4F90AF10100AC +:1009A00000F0FF0ABAF1080FC1DBB9F1010F03D162 +:1009B0002846FFF70AFF02E02846FFF75DFF4046A2 +:1009C000BDE8FC870FB4DDE90001C1F30F224261ED +:1009D00000BF04B070470FB4DDE90001C1F30F227E +:1009E000026100BF04B070472DE9FC4104460CB120 +:1009F000012100E0002108460F21FFF7BBFB25463F +:100A00002C462E686F68D7E90401CDE900016868BB +:100A1000D0F808C097E80F00E047D6E90401CDE917 +:100A200000012868D0F808C096E80F00E04720468B +:100A300000F058F9D7E90401CDE900016868D0F861 +:100A40000CC097E80F00E047204600F04BF9D6E9CC +:100A50000401CDE900012868D0F80CC096E80F0029 +:100A6000E047204600F03EF9BDE8FC812DE9FC415D +:100A700004460CB1012100E0002108462D21FFF7BA +:100A800079FB25462C462E686F68D6E90401CDE92E +:100A900000012868D0F80CC096E80F00E047D7E9BD +:100AA0000401CDE900016868D0F80CC097E80F0098 +:100AB000E047204600F016F9D6E90401CDE900012F +:100AC0002868D0F808C096E80F00E047D7E904018D +:100AD000CDE900016868D0F808C097E80F00E0474A +:100AE000204600F0FFF8BDE8FC810FB430B5DDE929 +:100AF0000301C268C1F30F2323EA020402EA0305DB +:100B000044EA0544046100BF30BC5DF814FB2DE9E4 +:100B1000FC4104460CB1012100E0002108464021BF +:100B2000FFF728FB4FF0000825462C462E686F681B +:100B3000D7E90401CDE900016868D0F808C097E85A +:100B40000F00E047D6E90401CDE900012868D0F89C +:100B500008C096E80F00E047204600F0C3F80CE01C +:100B600008F1010000F0FF08B8F1FA0F05DD20469A +:100B7000FFF77CFF0020BDE8FC81D7E90401CDE947 +:100B800000016868D0F814C097E80F00E04700281B +:100B9000E6D1D6E90401CDE900012868D0F80CC0FF +:100BA00096E80F00E047204600F09CF80120E2E7BD +:100BB0002DE9FC47064688464FF000090EB1012199 +:100BC00000E0002108468821FFF7D4FA3446276860 +:100BD00065684FF0000946E008F0800050B1D5E9A3 +:100BE0000401CDE900016068D0F808C095E80F0065 +:100BF000E04709E0D5E90401CDE900016068D0F8DB +:100C00000CC095E80F00E047D7E90401CDE90001E9 +:100C10002068D0F808C097E80F00E047304600F0A1 +:100C200061F84FEA48604FEA1068D7E90401CDE95E +:100C300000012068D0F80CC097E80F00E04730466C +:100C400000F050F8B9F1070F09D1D5E90401CDE959 +:100C500000016068D0F808C095E80F00E04709F18E +:100C6000010000F0FF09B9F1080FB5DBBDE8FC8712 +:100C700070B506460D4600240BE0E00045FA00F092 +:100C8000C1B23046FFF794FF3046FFF740FF601CCB +:100C9000C4B2022CF1DB70BD00200B49086000BF1C +:100CA00000BF4FF08040006840F001004FF08041ED +:100CB000086000BF00BF0846C06840F00100C8607F +:100CC00000BF00BF704700000400002010B50248BC +:100CD00000F07AF810BD00000400002010B500F00C +:100CE000A7F910BD70B504460CB1012100E0002148 +:100CF000084640F25921FFF73DFA0025258900E01A +:100D000000BF281EA5F101018DB2F9D170BD000010 +:100D10002DE9F04105460E4618273946002000F01F +:100D200069F904460CB1012100E000210846362192 +:100D3000FFF720FA256066600548A0600548E0607E +:100D400005482061054860612046BDE8F08100004B +:100D5000D7090008C5090008EB0A0008E5080008E3 +:100D6000F7B515465C263146002000F043F90446ED +:100D700020466946082203E011F8013B00F8013BD8 +:100D8000131EA2F10106B2B2F6D100BF25810848B8 +:100D9000A0630849E163084921640849A16408493E +:100DA00061640849E1640020A4F858002046FEBDB3 +:100DB000E90900086D0A00080F0B00080709000880 +:100DC000B10B0008710C000838B5014600200090F6 +:100DD000086810B1152821D116E000BF124B134C42 +:100DE000E068C3F30F2222EA000400EA020544EAA5 +:100DF00005440E4D2C6100BF00BF0D4800684860DF +:100E000000BF1520086000BF094A48681268101A20 +:100E1000642801D2002038BD00BFDFE70020086051 +:100E200000900320F7E7000020002004001001409C +:100E30006000002008B501201F49896901431E4A4E +:100E40009161114689690140009100BF00BF000710 +:100E50001146C9690143D1611146C9690140009138 +:100E600000BF00BF03200246144B19684FF6FF0372 +:100E70001940134B0B4343EA0221104B196000BF8A +:100E800000BF1048406820F0E06040F000700D495D +:100E9000486000BFFFF78EFBFFF788FAFFF7E2FA22 +:100EA000002000F011F8FFF719FFFFF7F5FE01E051 +:100EB000FFF70CFFFCE70000001002400CED00E023 +:100EC0000000FA050000014010B504460C4951F835 +:100ED00024104A000B4951F82400002100F09EF82C +:100EE000094951F824200749083951F82400002104 +:100EF00000F094F8012103480830015510BD0000AE +:100F0000E011000854000020F01100082DE9F0471E +:100F100004460F460025A9462348005D20B9224813 +:100F200018380168204688471FB94FF0FF30BDE8E8 +:100F3000F0871E4850F82400B7FBF0F61B4850F825 +:100F40002400B7FBF0F100FB117000B1761C1848CB +:100F500050F82400451E22E01348083850F82400B9 +:100F600030F8150010B909F1010901E04FF000094E +:100F7000B14513D14FF0000809E00B48083850F88C +:100F8000240005EB080220F8126008F10108B045C2 +:100F9000F3D3064850F824006843C8E76D1E002DBF +:100FA000DADA4FF0FF30C2E75C000020E8110008F9 +:100FB000E011000810B501460023002207E00B48AD +:100FC00050F8210030F8120000B15B1C521C084898 +:100FD00050F821009042F2D864205843044C54F851 +:100FE0002140B0FBF4F0C0B210BD0000540000205E +:100FF000E011000870B504460E4631462046FFF762 +:1010000085FF0546681C08B9002070BD024850F8ED +:1010100024002844F9E700004C00002030B50346C6 +:1010200001E003F8011B141EA2F10102F9D130BD49 +:101030001CB52F492F48FFF76BFE00902E492D4815 +:10104000FFF766FE01900022DDE90001FFF788FE50 +:101050002A490860AE2000F055F8D52000F052F87B +:10106000802000F04FF8A82000F04CF83F2000F05E +:1010700049F8D32000F046F8002000F043F8402063 +:1010800000F040F88D2000F03DF8142000F03AF810 +:10109000202000F037F8002000F034F8A12000F004 +:1010A00031F8C82000F02EF8DA2000F02BF81220DA +:1010B00000F028F8812000F025F8CF2000F022F879 +:1010C000D92000F01FF8F12000F01CF8DB2000F020 +:1010D00019F8402000F016F8A42000F013F8A6201C +:1010E00000F010F8AF2000F00DF800F009F81CBD7A +:1010F00020002004000C01401000100464000020B7 +:101100007047000038B5044600208DF800008DF8C7 +:1011100001401B480068816B1948006888471848DF +:1011200000687821426C16480068904714480068AF +:10113000016C1348006888479DF80010104800684B +:10114000426C0F48006890470D480068016C0C48DD +:10115000006888479DF8011009480068426C0848FB +:101160000068904706480068016C05480068884799 +:1011700003480068C16B02480068884738BD00001A +:101180006400002000BF00BF00BF00BF00BFBFF36E +:101190004F8F00BF00BF00BF0948006800F4E06047 +:1011A00008490843001D0649086000BF00BF00BF92 +:1011B000BFF34F8F00BF00BF00BF00BF00BFFDE700 +:1011C0000CED00E00000FA055F6C697374006C6957 +:1011D000737420616C6C20636F6D6D616E640000D0 +:1011E00000020000000000000800000008000000ED +:1011F000001000000000000018120008000000208D +:1012000078000000AC070008901200087800002069 +:1012100008180000BC0700080024F40000000000CB +:1012200000000000000000000000000000000000BE +:1012300000000000000000000000000000000000AE +:10124000000000000000000000000000000000009E +:10125000000000000000000000000000C90E0008AF +:10126000B50F000880000020400000208010002002 +:10127000420000200000000000000000000000000C +:10128000C8110008CE110008C6E533B4550800089F :04000005080000ED02 :00000001FF diff --git a/User/application/app.c b/User/application/app.c index fcc2927..6516b29 100644 --- a/User/application/app.c +++ b/User/application/app.c @@ -1,5 +1,6 @@ #include "app.h" +#include "board.h" #include "flow.h" static struct flow idle_fw; // 空闲任务 /** @@ -42,4 +43,6 @@ void app_run(void) void app_init(void) { FL_INIT(&idle_fw); // 空闲任务 + + ENABLE_TIM(TASK_TIM); } diff --git a/User/board/board.h b/User/board/board.h index ab03acd..0394bc2 100644 --- a/User/board/board.h +++ b/User/board/board.h @@ -2,5 +2,8 @@ #define __BOARD_H__ #include "lib.h" #include "ssd1306_oled.h" + +#define TASK_TIM TIM2 + void board_init(void); #endif diff --git a/User/system/bsp/bsp.h b/User/system/bsp/bsp.h index a1fc982..1f61a3b 100644 --- a/User/system/bsp/bsp.h +++ b/User/system/bsp/bsp.h @@ -18,7 +18,7 @@ #include "dmas.h" #include "tims.h" // #include "pwms.h" -#include "uarts.h" +// #include "uarts.h" // #include "eeprom.h" // #include "spis.h" #include "i2cs.h" diff --git a/motor.ioc b/motor.ioc index c1af37c..56954af 100644 --- a/motor.ioc +++ b/motor.ioc @@ -2,38 +2,16 @@ CAD.formats= CAD.pinconfig= CAD.provider= -Dma.Request0=USART1_RX -Dma.Request1=USART1_TX -Dma.RequestsNb=2 -Dma.USART1_RX.0.Direction=DMA_PERIPH_TO_MEMORY -Dma.USART1_RX.0.Instance=DMA1_Channel5 -Dma.USART1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART1_RX.0.MemInc=DMA_MINC_ENABLE -Dma.USART1_RX.0.Mode=DMA_NORMAL -Dma.USART1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART1_RX.0.PeriphInc=DMA_PINC_DISABLE -Dma.USART1_RX.0.Priority=DMA_PRIORITY_LOW -Dma.USART1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority -Dma.USART1_TX.1.Direction=DMA_MEMORY_TO_PERIPH -Dma.USART1_TX.1.Instance=DMA1_Channel4 -Dma.USART1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART1_TX.1.MemInc=DMA_MINC_ENABLE -Dma.USART1_TX.1.Mode=DMA_NORMAL -Dma.USART1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART1_TX.1.PeriphInc=DMA_PINC_DISABLE -Dma.USART1_TX.1.Priority=DMA_PRIORITY_LOW -Dma.USART1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority File.Version=6 GPIO.groupedBy=Group By Peripherals KeepUserPlacement=false Mcu.CPN=STM32F103C8T6 Mcu.Family=STM32F1 -Mcu.IP0=DMA -Mcu.IP1=NVIC -Mcu.IP2=RCC -Mcu.IP3=SYS -Mcu.IP4=USART1 -Mcu.IPNb=5 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IP3=TIM2 +Mcu.IPNb=4 Mcu.Name=STM32F103C(8-B)Tx Mcu.Package=LQFP48 Mcu.Pin0=PC13-TAMPER-RTC @@ -41,12 +19,11 @@ Mcu.Pin1=PD0-OSC_IN Mcu.Pin2=PD1-OSC_OUT Mcu.Pin3=PB12 Mcu.Pin4=PB13 -Mcu.Pin5=PA9 -Mcu.Pin6=PA10 -Mcu.Pin7=PA13 -Mcu.Pin8=PA14 -Mcu.Pin9=VP_SYS_VS_Systick -Mcu.PinsNb=10 +Mcu.Pin5=PA13 +Mcu.Pin6=PA14 +Mcu.Pin7=VP_SYS_VS_Systick +Mcu.Pin8=VP_TIM2_VS_ClockSourceINT +Mcu.PinsNb=9 Mcu.ThirdParty0=RealThread.RT-Thread.3.1.5 Mcu.ThirdPartyNb=1 Mcu.UserConstants= @@ -54,28 +31,21 @@ Mcu.UserName=STM32F103C8Tx MxCube.Version=6.9.2 MxDb.Version=DB.6.0.92 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false -NVIC.DMA1_Channel4_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true -NVIC.DMA1_Channel5_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.ForceEnableDMAVector=true NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false -NVIC.PVD_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false -NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true +NVIC.TIM2_IRQn=true\:15\:0\:true\:false\:true\:true\:true\:true NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false -PA10.Mode=Asynchronous -PA10.Signal=USART1_RX PA13.Mode=Serial_Wire PA13.Signal=SYS_JTMS-SWDIO PA14.Mode=Serial_Wire PA14.Signal=SYS_JTCK-SWCLK -PA9.Mode=Asynchronous -PA9.Signal=USART1_TX PB12.GPIOParameters=GPIO_Label PB12.GPIO_Label=OLED_SDA PB12.Signal=GPIO_Output @@ -120,7 +90,7 @@ ProjectManager.ToolChainLocation= ProjectManager.UAScriptAfterPath= ProjectManager.UAScriptBeforePath= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-LL-false,2-MX_GPIO_Init-GPIO-false-LL-true,3-MX_DMA_Init-DMA-false-LL-true,4-MX_USART1_UART_Init-USART1-false-LL-true +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-LL-false,2-MX_GPIO_Init-GPIO-false-LL-true,3-MX_TIM4_Init-TIM4-false-LL-true,3-MX_TIM2_Init-TIM2-false-LL-true RCC.ADCFreqValue=36000000 RCC.AHBFreq_Value=72000000 RCC.APB1CLKDivider=RCC_HCLK_DIV2 @@ -150,8 +120,11 @@ RealThread.RT-Thread.3.1.5.RT_USING_COMPONENTS_INIT=1 RealThread.RT-Thread.3.1.5.RT_USING_CONSOLE=0 RealThread.RT-Thread.3.1.5.RT_USING_DEVICE=1 RealThread.RT-Thread.3.1.5_SwParameter=RTOSJjkernel\:true;RTOSJjshell\:true;RTOSJjdevice\:true; -USART1.IPParameters=VirtualMode -USART1.VirtualMode=VM_ASYNC +TIM2.IPParameters=Prescaler,Period +TIM2.Period=99 +TIM2.Prescaler=7199 VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick +VP_TIM2_VS_ClockSourceINT.Mode=Internal +VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT board=custom