xushenghao
/
system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

新增freertos

This commit is contained in:
许晟昊 2025-01-02 18:30:46 +08:00
parent 549e659082
commit 089e8cc04c
48 changed files with 38348 additions and 66 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

84
bsp/bsp.c
View File

@ -1,8 +1,4 @@
#include "stm32l4xx_ll_pwr.h"
#include "stm32l4xx_ll_bus.h"
#include "stm32l4xx_ll_exti.h"
#include "stm32l4xx_ll_system.h"
#include "bsp.h"
#define EXIT_LINE LL_EXTI_LINE_16
@ -18,24 +14,24 @@ pvd_irq_handle_cb pvd_irq_handle_cb_func = NULL;
*/
void pvd_configuration(uint32_t pwr_level, pvd_irq_handle_cb call)
{
pvd_irq_handle_cb_func = call;
// 启用电源时钟
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
// pvd_irq_handle_cb_func = call;
// // 启用电源时钟
// LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
// 设置PVD电平阈值，例如设置为2.4V LL_PWR_PVDLEVEL_2
LL_PWR_SetPVDLevel(pwr_level);
// // 设置PVD电平阈值，例如设置为2.4V LL_PWR_PVDLEVEL_2
// LL_PWR_SetPVDLevel(pwr_level);
// 启用PVD
LL_PWR_EnablePVD();
// // 启用PVD
// LL_PWR_EnablePVD();
// 配置PVD中断
LL_EXTI_EnableIT_0_31(EXIT_LINE); // PVD连接到EXTI Line
LL_EXTI_EnableRisingTrig_0_31(EXIT_LINE);
LL_EXTI_EnableFallingTrig_0_31(EXIT_LINE);
// // 配置PVD中断
// LL_EXTI_EnableIT_0_31(EXIT_LINE); // PVD连接到EXTI Line
// LL_EXTI_EnableRisingTrig_0_31(EXIT_LINE);
// LL_EXTI_EnableFallingTrig_0_31(EXIT_LINE);
// 启用PVD中断向量
NVIC_EnableIRQ(PVD_PVM_IRQn);
NVIC_SetPriority(PVD_PVM_IRQn, 0);
// // 启用PVD中断向量
// NVIC_EnableIRQ(PVD_PVM_IRQn);
// NVIC_SetPriority(PVD_PVM_IRQn, 0);
}
/**
@ -47,14 +43,14 @@ void pvd_configuration(uint32_t pwr_level, pvd_irq_handle_cb call)
*/
void pvd_irq_handle(void)
{
if (LL_EXTI_IsActiveFlag_0_31(EXIT_LINE))
{
LL_EXTI_ClearFlag_0_31(EXIT_LINE);
if (pvd_irq_handle_cb_func != NULL)
{
pvd_irq_handle_cb_func();
}
}
// if (LL_EXTI_IsActiveFlag_0_31(EXIT_LINE))
// {
// LL_EXTI_ClearFlag_0_31(EXIT_LINE);
// if (pvd_irq_handle_cb_func != NULL)
// {
// pvd_irq_handle_cb_func();
// }
// }
}
/**
@ -68,27 +64,27 @@ void pvd_irq_handle(void)
*/
void disable_debug_interface(void)
{
// 使能 SYSCFG 时钟
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
// // 使能 SYSCFG 时钟
// LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
// 关闭调试接口
LL_DBGMCU_DisableDBGStopMode();
LL_DBGMCU_DisableDBGStandbyMode();
LL_DBGMCU_DisableDBGSleepMode();
// // 关闭调试接口
// LL_DBGMCU_DisableDBGStopMode();
// LL_DBGMCU_DisableDBGStandbyMode();
// LL_DBGMCU_DisableDBGSleepMode();
// 关闭 SWD 和 JTAG 接口
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
// // 关闭 SWD 和 JTAG 接口
// LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
// 配置 SWDIO (PA13) 和 SWCLK (PA14) 引脚为普通 GPIO
GPIO_InitStruct.Pin = LL_GPIO_PIN_13 | LL_GPIO_PIN_14;
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
// // 配置 SWDIO (PA13) 和 SWCLK (PA14) 引脚为普通 GPIO
// GPIO_InitStruct.Pin = LL_GPIO_PIN_13 | LL_GPIO_PIN_14;
// GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
// GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
// LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
// 如果使用的是 JTAG 接口，还需要配置 JTDI (PA15), JTDO (PB3), 和 NJTRST (PB4) 引脚
GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
// // 如果使用的是 JTAG 接口，还需要配置 JTDI (PA15), JTDO (PB3), 和 NJTRST (PB4) 引脚
// GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
// LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = LL_GPIO_PIN_3 | LL_GPIO_PIN_4;
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
// GPIO_InitStruct.Pin = LL_GPIO_PIN_3 | LL_GPIO_PIN_4;
// LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
}

16
bsp/bsp.h
View File

@ -11,17 +11,17 @@
*/
#ifndef __BSP_H__
#define __BSP_H__
#include "dmas.h"
#include "gpios.h"
#include "adcs.h"
#include "dacs.h"
#include "tims.h"
#include "pwms.h"
#include "dmas.h"
// #include "adcs.h"
// #include "dacs.h"
// #include "tims.h"
// #include "pwms.h"
#include "uarts.h"
#include "eeprom.h"
#include "spis.h"
#include "i2cs.h"
// #include "eeprom.h"
// #include "spis.h"
// #include "i2cs.h"
///< 定义回调函数类型
typedef void (*pvd_irq_handle_cb)(void);

6
bsp/dmas.h
View File

@ -1,5 +1,5 @@
#ifndef __DMA_H__
#define __DMA_H__
#ifndef __DMAS_H__
#define __DMAS_H__
/**
* @brief 清除DMA传输完成标志
@ -132,4 +132,4 @@
} \
} while (__LINE__ == -1)
#endif // __DMA_H__
#endif // __DMAS_H__

6
bsp/uarts.c
View File

@ -104,7 +104,7 @@ void uart_recv_en(uart_t *uart, BOOL rx_err_en)
LL_DMA_DisableChannel(uart->dma, uart->dma_rx_channel);
// 配置RX DMA
LL_DMA_SetPeriphAddress(uart->dma, uart->dma_rx_channel, LL_USART_DMA_GetRegAddr(uart->huart, LL_USART_DMA_REG_DATA_RECEIVE));
LL_DMA_SetPeriphAddress(uart->dma, uart->dma_rx_channel, LL_USART_DMA_GetRegAddr(uart->huart));
LL_DMA_SetMemoryAddress(uart->dma, uart->dma_rx_channel, (uint32_t)uart->rxbuf);
LL_DMA_SetDataLength(uart->dma, uart->dma_rx_channel, uart->rxsize);
LL_DMA_EnableIT_TC(uart->dma, uart->dma_rx_channel);
@ -113,7 +113,7 @@ void uart_recv_en(uart_t *uart, BOOL rx_err_en)
LL_USART_EnableIT_IDLE(uart->huart);
// 配置TX DMA
LL_DMA_SetPeriphAddress(uart->dma, uart->dma_tx_channel, LL_USART_DMA_GetRegAddr(uart->huart, LL_USART_DMA_REG_DATA_TRANSMIT));
LL_DMA_SetPeriphAddress(uart->dma, uart->dma_tx_channel, LL_USART_DMA_GetRegAddr(uart->huart));
// 配置内存地址
LL_DMA_SetMemoryAddress(uart->dma, uart->dma_tx_channel, (uint32_t)uart->txbuf);
LL_DMA_EnableIT_TC(uart->dma, uart->dma_tx_channel);
@ -178,7 +178,7 @@ void uart_free(uart_t *uart)
*/
void uart_set_baudrate(USART_TypeDef *uart, uint32_t baudrate)
{
LL_USART_SetBaudRate(uart, SystemCoreClock, LL_USART_OVERSAMPLING_16, baudrate);
LL_USART_SetBaudRate(uart, SystemCoreClock, LL_USART_OVERSAMPLING_16);
}
/**

11
freertos/.git-blame-ignore-revs Normal file
View File

@ -0,0 +1,11 @@
# Normalize line endings and whitespace
ddd1e30018e74ad293cda0635018d636a6657f57
# Convert tabs to spaces (4)
8c77117c32e49a5070cd85e8920c36723997e465
# Apply uncrustify rules
587a83d647619bb0a508661c7bb4d6df89851582
2c530ba5c352fdf420d1b13709a3970f04e9e6c6
718178c68a1c863dd1a2eac7aea326a789d3bc52
a5dbc2b1de17e5468420d5a928d7392d799780e2

1
freertos/.gitattributes vendored Normal file
View File

@ -0,0 +1 @@
* text=auto

6
freertos/.gitmodules vendored Normal file
View File

@ -0,0 +1,6 @@
[submodule "ThirdParty/FreeRTOS-Kernel-Partner-Supported-Ports"]
path = portable/ThirdParty/Partner-Supported-Ports
url = https://github.com/FreeRTOS/FreeRTOS-Kernel-Partner-Supported-Ports
[submodule "ThirdParty/FreeRTOS-Kernel-Community-Supported-Ports"]
path = portable/ThirdParty/Community-Supported-Ports
url = https://github.com/FreeRTOS/FreeRTOS-Kernel-Community-Supported-Ports

269
freertos/CMakeLists.txt Normal file
View File

@ -0,0 +1,269 @@
cmake_minimum_required(VERSION 3.15)
# User is responsible to one mandatory option:
# FREERTOS_PORT, if not specified and native port detected, uses the native compile.
#
# User is responsible for one library target:
# freertos_config ,typically an INTERFACE library
#
# DEPRECATED: FREERTOS_CONFIG_FILE_DIRECTORY - but still supported if no freertos_config defined for now.
# May be removed at some point in the future.
#
# User can choose which heap implementation to use (either the implementations
# included with FreeRTOS [1..5] or a custom implementation) by providing the
# option FREERTOS_HEAP. When dynamic allocation is used, the user must specify a
# heap implementation. If the option is not set, the cmake will use no heap
# implementation (e.g. when only static allocation is used).
# `freertos_config` target defines the path to FreeRTOSConfig.h and optionally other freertos based config files
if(NOT TARGET freertos_config )
if (NOT DEFINED FREERTOS_CONFIG_FILE_DIRECTORY )
message(FATAL_ERROR " freertos_config target not specified. Please specify a cmake target that defines the include directory for FreeRTOSConfig.h:\n"
" add_library(freertos_config INTERFACE)\n"
" target_include_directories(freertos_config SYSTEM\n"
" INTERFACE\n"
" include) # The config file directory\n"
" target_compile_definitions(freertos_config\n"
" PUBLIC\n"
" projCOVERAGE_TEST=0)\n")
else()
message(WARNING " Using deprecated 'FREERTOS_CONFIG_FILE_DIRECTORY' - please update your project CMakeLists.txt file:\n"
" add_library(freertos_config INTERFACE)\n"
" target_include_directories(freertos_config SYSTEM\n"
" INTERFACE\n"
" include) # The config file directory\n"
" target_compile_definitions(freertos_config\n"
" PUBLIC\n"
" projCOVERAGE_TEST=0)\n")
endif()
endif()
# FreeRTOS port option
if(NOT FREERTOS_PORT)
message(WARNING " FREERTOS_PORT is not set. Please specify it from top-level CMake file (example):\n"
" set(FREERTOS_PORT GCC_ARM_CM4F CACHE STRING \"\")\n"
" or from CMake command line option:\n"
" -DFREERTOS_PORT=GCC_ARM_CM4F\n"
" \n"
" Available port options:\n"
" A_CUSTOM_PORT - Compiler: User Defined Target: User Defined\n"
" BCC_16BIT_DOS_FLSH186 - Compiler: BCC Target: 16 bit DOS Flsh186\n"
" BCC_16BIT_DOS_PC - Compiler: BCC Target: 16 bit DOS PC\n"
" CCS_ARM_CM3 - Compiler: CCS Target: ARM Cortex-M3\n"
" CCS_ARM_CM4F - Compiler: CCS Target: ARM Cortex-M4 with FPU\n"
" CCS_ARM_CR4 - Compiler: CCS Target: ARM Cortex-R4\n"
" CCS_MSP430X - Compiler: CCS Target: MSP430X\n"
" CODEWARRIOR_COLDFIRE_V1 - Compiler: CoreWarrior Target: ColdFire V1\n"
" CODEWARRIOR_COLDFIRE_V2 - Compiler: CoreWarrior Target: ColdFire V2\n"
" CODEWARRIOR_HCS12 - Compiler: CoreWarrior Target: HCS12\n"
" GCC_ARM_CA9 - Compiler: GCC Target: ARM Cortex-A9\n"
" GCC_ARM_AARCH64 - Compiler: GCC Target: ARM v8-A\n"
" GCC_ARM_AARCH64_SRE - Compiler: GCC Target: ARM v8-A SRE\n"
" GCC_ARM_CM0 - Compiler: GCC Target: ARM Cortex-M0\n"
" GCC_ARM_CM3 - Compiler: GCC Target: ARM Cortex-M3\n"
" GCC_ARM_CM3_MPU - Compiler: GCC Target: ARM Cortex-M3 with MPU\n"
" GCC_ARM_CM4_MPU - Compiler: GCC Target: ARM Cortex-M4 with MPU\n"
" GCC_ARM_CM4F - Compiler: GCC Target: ARM Cortex-M4 with FPU\n"
" GCC_ARM_CM7 - Compiler: GCC Target: ARM Cortex-M7\n"
" GCC_ARM_CM23_NONSECURE - Compiler: GCC Target: ARM Cortex-M23 non-secure\n"
" GCC_ARM_CM23_SECURE - Compiler: GCC Target: ARM Cortex-M23 secure\n"
" GCC_ARM_CM23_NTZ_NONSECURE - Compiler: GCC Target: ARM Cortex-M23 non-trustzone non-secure\n"
" GCC_ARM_CM33_NONSECURE - Compiler: GCC Target: ARM Cortex-M33 non-secure\n"
" GCC_ARM_CM33_SECURE - Compiler: GCC Target: ARM Cortex-M33 secure\n"
" GCC_ARM_CM33_NTZ_NONSECURE - Compiler: GCC Target: ARM Cortex-M33 non-trustzone non-secure\n"
" GCC_ARM_CM33_TFM - Compiler: GCC Target: ARM Cortex-M33 non-secure for TF-M\n"
" GCC_ARM_CM35P_NONSECURE - Compiler: GCC Target: ARM Cortex-M35P non-secure\n"
" GCC_ARM_CM35P_SECURE - Compiler: GCC Target: ARM Cortex-M35P secure\n"
" GCC_ARM_CM35P_NTZ_NONSECURE - Compiler: GCC Target: ARM Cortex-M35P non-trustzone non-secure\n"
" GCC_ARM_CM55_NONSECURE - Compiler: GCC Target: ARM Cortex-M55 non-secure\n"
" GCC_ARM_CM55_SECURE - Compiler: GCC Target: ARM Cortex-M55 secure\n"
" GCC_ARM_CM55_NTZ_NONSECURE - Compiler: GCC Target: ARM Cortex-M55 non-trustzone non-secure\n"
" GCC_ARM_CM55_TFM - Compiler: GCC Target: ARM Cortex-M55 non-secure for TF-M\n"
" GCC_ARM_CM85_NONSECURE - Compiler: GCC Target: ARM Cortex-M85 non-secure\n"
" GCC_ARM_CM85_SECURE - Compiler: GCC Target: ARM Cortex-M85 secure\n"
" GCC_ARM_CM85_NTZ_NONSECURE - Compiler: GCC Target: ARM Cortex-M85 non-trustzone non-secure\n"
" GCC_ARM_CM85_TFM - Compiler: GCC Target: ARM Cortex-M85 non-secure for TF-M\n"
" GCC_ARM_CR5 - Compiler: GCC Target: ARM Cortex-R5\n"
" GCC_ARM_CRX_MPU - Compiler: GCC Target: ARM Cortex-Rx with MPU\n"
" GCC_ARM_CRX_NOGIC - Compiler: GCC Target: ARM Cortex-Rx no GIC\n"
" GCC_ARM7_AT91FR40008 - Compiler: GCC Target: ARM7 Atmel AT91R40008\n"
" GCC_ARM7_AT91SAM7S - Compiler: GCC Target: ARM7 Atmel AT91SAM7S\n"
" GCC_ARM7_LPC2000 - Compiler: GCC Target: ARM7 LPC2000\n"
" GCC_ARM7_LPC23XX - Compiler: GCC Target: ARM7 LPC23xx\n"
" GCC_ATMEGA323 - Compiler: GCC Target: ATMega323\n"
" GCC_AVR32_UC3 - Compiler: GCC Target: AVR32 UC3\n"
" GCC_COLDFIRE_V2 - Compiler: GCC Target: ColdFire V2\n"
" GCC_CORTUS_APS3 - Compiler: GCC Target: CORTUS APS3\n"
" GCC_H8S2329 - Compiler: GCC Target: H8S2329\n"
" GCC_HCS12 - Compiler: GCC Target: HCS12\n"
" GCC_IA32_FLAT - Compiler: GCC Target: IA32 flat\n"
" GCC_MICROBLAZE - Compiler: GCC Target: MicroBlaze\n"
" GCC_MICROBLAZE_V8 - Compiler: GCC Target: MicroBlaze V8\n"
" GCC_MICROBLAZE_V9 - Compiler: GCC Target: MicroBlaze V9\n"
" GCC_MSP430F449 - Compiler: GCC Target: MSP430F449\n"
" GCC_NIOSII - Compiler: GCC Target: NiosII\n"
" GCC_PPC405_XILINX - Compiler: GCC Target: Xilinx PPC405\n"
" GCC_PPC440_XILINX - Compiler: GCC Target: Xilinx PPC440\n"
" GCC_RISC_V - Compiler: GCC Target: RISC-V\n"
" GCC_RISC_V_PULPINO_VEGA_RV32M1RM - Compiler: GCC Target: RISC-V Pulpino Vega RV32M1RM\n"
" GCC_RISC_V_GENERIC - Compiler: GCC Target: RISC-V with FREERTOS_RISCV_EXTENSION\n"
" GCC_RL78 - Compiler: GCC Target: Renesas RL78\n"
" GCC_RX100 - Compiler: GCC Target: Renesas RX100\n"
" GCC_RX200 - Compiler: GCC Target: Renesas RX200\n"
" GCC_RX600 - Compiler: GCC Target: Renesas RX600\n"
" GCC_RX600_V2 - Compiler: GCC Target: Renesas RX600 v2\n"
" GCC_RX700_V3_DPFPU - Compiler: GCC Target: Renesas RX700 v3 with DPFPU\n"
" GCC_STR75X - Compiler: GCC Target: STR75x\n"
" GCC_TRICORE_1782 - Compiler: GCC Target: TriCore 1782\n"
" GCC_ARC_EM_HS - Compiler: GCC Target: DesignWare ARC EM HS\n"
" GCC_ARC_V1 - Compiler: GCC Target: DesignWare ARC v1\n"
" GCC_ATMEGA - Compiler: GCC Target: ATmega\n"
" GCC_POSIX - Compiler: GCC Target: Posix\n"
" GCC_RP2040 - Compiler: GCC Target: RP2040 ARM Cortex-M0+\n"
" GCC_XTENSA_ESP32 - Compiler: GCC Target: Xtensa ESP32\n"
" GCC_AVRDX - Compiler: GCC Target: AVRDx\n"
" GCC_AVR_MEGA0 - Compiler: GCC Target: AVR Mega0\n"
" IAR_78K0K - Compiler: IAR Target: Renesas 78K0K\n"
" IAR_ARM_CA5_NOGIC - Compiler: IAR Target: ARM Cortex-A5 no GIC\n"
" IAR_ARM_CA9 - Compiler: IAR Target: ARM Cortex-A9\n"
" IAR_ARM_CM0 - Compiler: IAR Target: ARM Cortex-M0\n"
" IAR_ARM_CM3 - Compiler: IAR Target: ARM Cortex-M3\n"
" IAR_ARM_CM4F - Compiler: IAR Target: ARM Cortex-M4 with FPU\n"
" IAR_ARM_CM4F_MPU - Compiler: IAR Target: ARM Cortex-M4 with FPU and MPU\n"
" IAR_ARM_CM7 - Compiler: IAR Target: ARM Cortex-M7\n"
" IAR_ARM_CM23_NONSECURE - Compiler: IAR Target: ARM Cortex-M23 non-secure\n"
" IAR_ARM_CM23_SECURE - Compiler: IAR Target: ARM Cortex-M23 secure\n"
" IAR_ARM_CM23_NTZ_NONSECURE - Compiler: IAR Target: ARM Cortex-M23 non-trustzone non-secure\n"
" IAR_ARM_CM33_NONSECURE - Compiler: IAR Target: ARM Cortex-M33 non-secure\n"
" IAR_ARM_CM33_SECURE - Compiler: IAR Target: ARM Cortex-M33 secure\n"
" IAR_ARM_CM33_NTZ_NONSECURE - Compiler: IAR Target: ARM Cortex-M33 non-trustzone non-secure\n"
" IAR_ARM_CM35P_NONSECURE - Compiler: IAR Target: ARM Cortex-M35P non-secure\n"
" IAR_ARM_CM35P_SECURE - Compiler: IAR Target: ARM Cortex-M35P secure\n"
" IAR_ARM_CM35P_NTZ_NONSECURE - Compiler: IAR Target: ARM Cortex-M35P non-trustzone non-secure\n"
" IAR_ARM_CM55_NONSECURE - Compiler: IAR Target: ARM Cortex-M55 non-secure\n"
" IAR_ARM_CM55_SECURE - Compiler: IAR Target: ARM Cortex-M55 secure\n"
" IAR_ARM_CM55_NTZ_NONSECURE - Compiler: IAR Target: ARM Cortex-M55 non-trustzone non-secure\n"
" IAR_ARM_CM85_NONSECURE - Compiler: IAR Target: ARM Cortex-M85 non-secure\n"
" IAR_ARM_CM85_SECURE - Compiler: IAR Target: ARM Cortex-M85 secure\n"
" IAR_ARM_CM85_NTZ_NONSECURE - Compiler: IAR Target: ARM Cortex-M85 non-trustzone non-secure\n"
" IAR_ARM_CRX_NOGIC - Compiler: IAR Target: ARM Cortex-Rx no GIC\n"
" IAR_ATMEGA323 - Compiler: IAR Target: ATMega323\n"
" IAR_ATMEL_SAM7S64 - Compiler: IAR Target: Atmel SAM7S64\n"
" IAR_ATMEL_SAM9XE - Compiler: IAR Target: Atmel SAM9XE\n"
" IAR_AVR_AVRDX - Compiler: IAR Target: AVRDx\n"
" IAR_AVR_MEGA0 - Compiler: IAR Target: AVR Mega0\n"
" IAR_AVR32_UC3 - Compiler: IAR Target: AVR32 UC3\n"
" IAR_LPC2000 - Compiler: IAR Target: LPC2000\n"
" IAR_MSP430 - Compiler: IAR Target: MSP430\n"
" IAR_MSP430X - Compiler: IAR Target: MSP430X\n"
" IAR_RISC_V - Compiler: IAR Target: RISC-V\n"
" IAR_RISC_V_GENERIC - Compiler: IAR Target: RISC-V with FREERTOS_RISCV_EXTENSION\n"
" IAR_RL78 - Compiler: IAR Target: Renesas RL78\n"
" IAR_RX100 - Compiler: IAR Target: Renesas RX100\n"
" IAR_RX600 - Compiler: IAR Target: Renesas RX600\n"
" IAR_RX700_V3_DPFPU - Compiler: IAR Target: Renesas RX700 v3 with DPFPU\n"
" IAR_RX_V2 - Compiler: IAR Target: Renesas RX v2\n"
" IAR_STR71X - Compiler: IAR Target: STR71x\n"
" IAR_STR75X - Compiler: IAR Target: STR75x\n"
" IAR_STR91X - Compiler: IAR Target: STR91x\n"
" IAR_V850ES_FX3 - Compiler: IAR Target: Renesas V850ES/Fx3\n"
" IAR_V850ES_HX3 - Compiler: IAR Target: Renesas V850ES/Hx3\n"
" MIKROC_ARM_CM4F - Compiler: MikroC Target: ARM Cortex-M4 with FPU\n"
" MPLAB_PIC18F - Compiler: MPLAB Target: PIC18F\n"
" MPLAB_PIC24 - Compiler: MPLAB Target: PIC24\n"
" MPLAB_PIC32MEC14XX - Compiler: MPLAB Target: PIC32MEC14xx\n"
" MPLAB_PIC32MX - Compiler: MPLAB Target: PIC32MX\n"
" MPLAB_PIC32MZ - Compiler: MPLAB Target: PIC32MZ\n"
" MSVC_MINGW - Compiler: MSVC or MinGW Target: x86\n"
" OWATCOM_16BIT_DOS_FLSH186 - Compiler: Open Watcom Target: 16 bit DOS Flsh186\n"
" OWATCOM_16BIT_DOS_PC - Compiler: Open Watcom Target: 16 bit DOS PC\n"
" PARADIGM_TERN_EE_LARGE - Compiler: Paradigm Target: Tern EE large\n"
" PARADIGM_TERN_EE_SMALL - Compiler: Paradigm Target: Tern EE small\n"
" RENESAS_RX100 - Compiler: Renesas Target: RX100\n"
" RENESAS_RX200 - Compiler: Renesas Target: RX200\n"
" RENESAS_RX600 - Compiler: Renesas Target: RX600\n"
" RENESAS_RX600_V2 - Compiler: Renesas Target: RX600 v2\n"
" RENESAS_RX700_V3_DPFPU - Compiler: Renesas Target: RX700 v3 with DPFPU\n"
" RENESAS_SH2A_FPU - Compiler: Renesas Target: SH2A with FPU\n"
" ROWLEY_MSP430F449 - Compiler: Rowley Target: MSP430F449\n"
" RVDS_ARM_CA9 - Compiler: RVDS Target: ARM Cortex-A9\n"
" RVDS_ARM_CM0 - Compiler: RVDS Target: ARM Cortex-M0\n"
" RVDS_ARM_CM3 - Compiler: RVDS Target: ARM Cortex-M3\n"
" RVDS_ARM_CM4_MPU - Compiler: RVDS Target: ARM Cortex-M4 with MPU\n"
" RVDS_ARM_CM4F - Compiler: RVDS Target: ARM Cortex-M4 with FPU\n"
" RVDS_ARM_CM7 - Compiler: RVDS Target: ARM Cortex-M7\n"
" RVDS_ARM7_LPC21XX - Compiler: RVDS Target: ARM7 LPC21xx\n"
" SDCC_CYGNAL - Compiler: SDCC Target: Cygnal\n"
" SOFTUNE_MB91460 - Compiler: Softune Target: MB91460\n"
" SOFTUNE_MB96340 - Compiler: Softune Target: MB96340\n"
" TASKING_ARM_CM4F - Compiler: Tasking Target: ARM Cortex-M4 with FPU\n"
" TEMPLATE - Compiler: HOST Target: None\n"
" CDK_THEAD_CK802 - Compiler: CDK Target: T-head CK802\n"
" XCC_XTENSA - Compiler: XCC Target: Xtensa\n"
" WIZC_PIC18 - Compiler: WizC Target: PIC18")
# Native FREERTOS_PORT for Linux and Windows MINGW builds
if(UNIX)
message(STATUS " Auto-Detected Unix, setting FREERTOS_PORT=GCC_POSIX")
set(FREERTOS_PORT GCC_POSIX CACHE STRING "FreeRTOS port name")
elseif(MINGW)
message(STATUS " Auto-Detected MINGW, setting FREERTOS_PORT=MSVC_MINGW")
set(FREERTOS_PORT MSVC_MINGW CACHE STRING "FreeRTOS port name")
endif()
elseif((FREERTOS_PORT STREQUAL "A_CUSTOM_PORT") AND (NOT TARGET freertos_kernel_port) )
message(FATAL_ERROR " FREERTOS_PORT is set to A_CUSTOM_PORT. Please specify the custom port target with all necessary files. For example:\n"
" Assuming a directory of:\n"
" FreeRTOSCustomPort/\n"
" CMakeLists.txt\n"
" port.c\n"
" portmacro.h\n"
" Where FreeRTOSCustomPort/CMakeLists.txt is a modified version of:\n"
" add_library(freertos_kernel_port OBJECT)\n"
" target_sources(freertos_kernel_port\n"
" PRIVATE\n"
" port.c\n"
" portmacro.h)\n"
" add_library(freertos_kernel_port_headers INTERFACE)\n"
" target_include_directories(freertos_kernel_port_headers INTERFACE \n"
" .)\n"
" target_link_libraries(freertos_kernel_port\n"
" PRIVATE\n"
" freertos_kernel_port_headers\n"
" freertos_kernel_include)")
endif()
add_library(freertos_kernel STATIC)
########################################################################
add_subdirectory(include)
add_subdirectory(portable)
target_sources(freertos_kernel PRIVATE
croutine.c
event_groups.c
list.c
queue.c
stream_buffer.c
tasks.c
timers.c
)
if (DEFINED FREERTOS_HEAP )
# User specified a heap implementation add heap implementation to freertos_kernel.
target_sources(freertos_kernel PRIVATE
# If FREERTOS_HEAP is digit between 1 .. 5 - it is heap number, otherwise - it is path to custom heap source file
$<IF:$<BOOL:$<FILTER:${FREERTOS_HEAP},EXCLUDE,^[1-5]$>>,${FREERTOS_HEAP},portable/MemMang/heap_${FREERTOS_HEAP}.c>
)
endif()
target_link_libraries(freertos_kernel
PUBLIC
freertos_kernel_include
freertos_kernel_port_headers
PRIVATE
freertos_kernel_port
)
########################################################################

126
freertos/MISRA.md Normal file
View File

@ -0,0 +1,126 @@
# MISRA Compliance
FreeRTOS-Kernel conforms to [MISRA C:2012](https://www.misra.org.uk/misra-c)
guidelines, with the deviations listed below. Compliance is checked with
Coverity static analysis version 2023.6.1. Since the FreeRTOS kernel is
designed for small-embedded devices, it needs to have a very small memory
footprint and has to be efficient. To achieve that and to increase the
performance, it deviates from some MISRA rules. The specific deviations,
suppressed inline, are listed below.
Additionally, [MISRA configuration file](examples/coverity/coverity_misra.config)
contains project wide deviations.
### Suppressed with Coverity Comments
To find the violation references in the source files run grep on the source code
with ( Assuming rule 8.4 violation; with justification in point 1 ):
```
grep 'MISRA Ref 8.4.1' . -rI
```
#### Dir 4.7
MISRA C:2012 Dir 4.7: If a function returns error information, then that error
information shall be tested.
_Ref 4.7.1_
- `taskENTER_CRITICAL_FROM_ISR` returns the interrupt mask and not any error
information. Therefore, there is no need test the return value.
#### Rule 8.4
MISRA C:2012 Rule 8.4: A compatible declaration shall be visible when an
object or function with external linkage is defined.
_Ref 8.4.1_
- pxCurrentTCB(s) is defined with external linkage but it is only referenced
from the assembly code in the port files. Therefore, adding a declaration in
header file is not useful as the assembly code will still need to declare it
separately.
_Ref 8.4.2_
- xQueueRegistry is defined with external linkage because it is accessed by the
kernel unit tests. It is not meant to be directly accessed by the application
and therefore, not declared in a header file.
#### Rule 8.6
MISRA C:2012 Rule 8.6: An identifier with external linkage shall have exactly
one external definition.
_Ref 8.6.1_
- This rule prohibits an identifier with external linkage to have multiple
definitions or no definition. FreeRTOS hook functions are implemented in
the application and therefore, have no definition in the Kernel code.
#### Rule 11.1
MISRA C:2012 Rule 11.1: Conversions shall not be performed between a pointer to
function and any other type.
_Ref 11.1.1_
- The pointer to function is casted into void to avoid unused parameter
compiler warning when Stream Buffer's Tx and Rx Completed callback feature is
not used.
#### Rule 11.3
MISRA C:2012 Rule 11.3: A cast shall not be performed between a pointer to
object type and a pointer to a different object type.
_Ref 11.3.1_
- This rule prohibits casting a pointer to object into a pointer to a
different object because it may result in an incorrectly aligned pointer,
leading to undefined behavior. Even if the casting produces a correctly
aligned pointer, the behavior may be still undefined if the pointer is
used to access an object. FreeRTOS deliberately creates external aliases
for all the kernel object types (StaticEventGroup_t, StaticQueue_t,
StaticStreamBuffer_t, StaticTimer_t and StaticTask_t) for data hiding
purposes. The internal object types and the corresponding external
aliases are guaranteed to have the same size and alignment which is
checked using configASSERT.
#### Rule 11.5
MISRA C:2012 Rule 11.5: A conversion should not be performed from pointer to
void into pointer to object.
This rule prohibits conversion of a pointer to void into a pointer to
object because it may result in an incorrectly aligned pointer leading
to undefined behavior.
_Ref 11.5.1_
- The memory blocks returned by pvPortMalloc() are guaranteed to meet the
architecture alignment requirements specified by portBYTE_ALIGNMENT.
The casting of the pointer to void returned by pvPortMalloc() is,
therefore, safe because it is guaranteed to be aligned.
_Ref 11.5.2_
- The conversion from a pointer to void into a pointer to EventGroup_t is
safe because it is a pointer to EventGroup_t, which is returned to the
application at the time of event group creation for data hiding
purposes.
_Ref 11.5.3_
- The conversion from a pointer to void in list macros for list item owner
is safe because the type of the pointer stored and retrieved is the
same.
_Ref 11.5.4_
- The conversion from a pointer to void into a pointer to EventGroup_t is
safe because it is a pointer to EventGroup_t, which is passed as a
parameter to the xTimerPendFunctionCallFromISR API when the callback is
pended.
_Ref 11.5.5_
- The conversion from a pointer to void into a pointer to uint8_t is safe
because data storage buffers are implemented as uint8_t arrays for the
ease of sizing, alignment and access.
#### Rule 21.6
MISRA C-2012 Rule 21.6: The Standard Library input/output functions shall not
be used.
_Ref 21.6.1_
- The Standard Library function snprintf is used in vTaskListTasks and
vTaskGetRunTimeStatistics APIs, both of which are utility functions only and
are not considered part of core kernel implementation.

405
freertos/croutine.c Normal file
View File

@ -0,0 +1,405 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#include "FreeRTOS.h"
#include "task.h"
#include "croutine.h"
/* Remove the whole file if co-routines are not being used. */
#if ( configUSE_CO_ROUTINES != 0 )
/*
* Some kernel aware debuggers require data to be viewed to be global, rather
* than file scope.
*/
#ifdef portREMOVE_STATIC_QUALIFIER
#define static
#endif
/* Lists for ready and blocked co-routines. --------------------*/
static List_t pxReadyCoRoutineLists[ configMAX_CO_ROUTINE_PRIORITIES ]; /**< Prioritised ready co-routines. */
static List_t xDelayedCoRoutineList1; /**< Delayed co-routines. */
static List_t xDelayedCoRoutineList2; /**< Delayed co-routines (two lists are used - one for delays that have overflowed the current tick count. */
static List_t * pxDelayedCoRoutineList = NULL; /**< Points to the delayed co-routine list currently being used. */
static List_t * pxOverflowDelayedCoRoutineList = NULL; /**< Points to the delayed co-routine list currently being used to hold co-routines that have overflowed the current tick count. */
static List_t xPendingReadyCoRoutineList; /**< Holds co-routines that have been readied by an external event. They cannot be added directly to the ready lists as the ready lists cannot be accessed by interrupts. */
/* Other file private variables. --------------------------------*/
CRCB_t * pxCurrentCoRoutine = NULL;
static UBaseType_t uxTopCoRoutineReadyPriority = ( UBaseType_t ) 0U;
static TickType_t xCoRoutineTickCount = ( TickType_t ) 0U;
static TickType_t xLastTickCount = ( TickType_t ) 0U;
static TickType_t xPassedTicks = ( TickType_t ) 0U;
/* The initial state of the co-routine when it is created. */
#define corINITIAL_STATE ( 0 )
/*
* Place the co-routine represented by pxCRCB into the appropriate ready queue
* for the priority. It is inserted at the end of the list.
*
* This macro accesses the co-routine ready lists and therefore must not be
* used from within an ISR.
*/
#define prvAddCoRoutineToReadyQueue( pxCRCB ) \
do { \
if( ( pxCRCB )->uxPriority > uxTopCoRoutineReadyPriority ) \
{ \
uxTopCoRoutineReadyPriority = ( pxCRCB )->uxPriority; \
} \
vListInsertEnd( ( List_t * ) &( pxReadyCoRoutineLists[ ( pxCRCB )->uxPriority ] ), &( ( pxCRCB )->xGenericListItem ) ); \
} while( 0 )
/*
* Utility to ready all the lists used by the scheduler. This is called
* automatically upon the creation of the first co-routine.
*/
static void prvInitialiseCoRoutineLists( void );
/*
* Co-routines that are readied by an interrupt cannot be placed directly into
* the ready lists (there is no mutual exclusion). Instead they are placed in
* in the pending ready list in order that they can later be moved to the ready
* list by the co-routine scheduler.
*/
static void prvCheckPendingReadyList( void );
/*
* Macro that looks at the list of co-routines that are currently delayed to
* see if any require waking.
*
* Co-routines are stored in the queue in the order of their wake time -
* meaning once one co-routine has been found whose timer has not expired
* we need not look any further down the list.
*/
static void prvCheckDelayedList( void );
/*-----------------------------------------------------------*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex )
{
BaseType_t xReturn;
CRCB_t * pxCoRoutine;
traceENTER_xCoRoutineCreate( pxCoRoutineCode, uxPriority, uxIndex );
/* Allocate the memory that will store the co-routine control block. */
/* MISRA Ref 11.5.1 [Malloc memory assignment] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-115 */
/* coverity[misra_c_2012_rule_11_5_violation] */
pxCoRoutine = ( CRCB_t * ) pvPortMalloc( sizeof( CRCB_t ) );
if( pxCoRoutine )
{
/* If pxCurrentCoRoutine is NULL then this is the first co-routine to
* be created and the co-routine data structures need initialising. */
if( pxCurrentCoRoutine == NULL )
{
pxCurrentCoRoutine = pxCoRoutine;
prvInitialiseCoRoutineLists();
}
/* Check the priority is within limits. */
if( uxPriority >= configMAX_CO_ROUTINE_PRIORITIES )
{
uxPriority = configMAX_CO_ROUTINE_PRIORITIES - 1;
}
/* Fill out the co-routine control block from the function parameters. */
pxCoRoutine->uxState = corINITIAL_STATE;
pxCoRoutine->uxPriority = uxPriority;
pxCoRoutine->uxIndex = uxIndex;
pxCoRoutine->pxCoRoutineFunction = pxCoRoutineCode;
/* Initialise all the other co-routine control block parameters. */
vListInitialiseItem( &( pxCoRoutine->xGenericListItem ) );
vListInitialiseItem( &( pxCoRoutine->xEventListItem ) );
/* Set the co-routine control block as a link back from the ListItem_t.
* This is so we can get back to the containing CRCB from a generic item
* in a list. */
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xGenericListItem ), pxCoRoutine );
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xEventListItem ), pxCoRoutine );
/* Event lists are always in priority order. */
listSET_LIST_ITEM_VALUE( &( pxCoRoutine->xEventListItem ), ( ( TickType_t ) configMAX_CO_ROUTINE_PRIORITIES - ( TickType_t ) uxPriority ) );
/* Now the co-routine has been initialised it can be added to the ready
* list at the correct priority. */
prvAddCoRoutineToReadyQueue( pxCoRoutine );
xReturn = pdPASS;
}
else
{
xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
}
traceRETURN_xCoRoutineCreate( xReturn );
return xReturn;
}
/*-----------------------------------------------------------*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList )
{
TickType_t xTimeToWake;
traceENTER_vCoRoutineAddToDelayedList( xTicksToDelay, pxEventList );
/* Calculate the time to wake - this may overflow but this is
* not a problem. */
xTimeToWake = xCoRoutineTickCount + xTicksToDelay;
/* We must remove ourselves from the ready list before adding
* ourselves to the blocked list as the same list item is used for
* both lists. */
( void ) uxListRemove( ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
/* The list item will be inserted in wake time order. */
listSET_LIST_ITEM_VALUE( &( pxCurrentCoRoutine->xGenericListItem ), xTimeToWake );
if( xTimeToWake < xCoRoutineTickCount )
{
/* Wake time has overflowed. Place this item in the
* overflow list. */
vListInsert( ( List_t * ) pxOverflowDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
else
{
/* The wake time has not overflowed, so we can use the
* current block list. */
vListInsert( ( List_t * ) pxDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
if( pxEventList )
{
/* Also add the co-routine to an event list. If this is done then the
* function must be called with interrupts disabled. */
vListInsert( pxEventList, &( pxCurrentCoRoutine->xEventListItem ) );
}
traceRETURN_vCoRoutineAddToDelayedList();
}
/*-----------------------------------------------------------*/
static void prvCheckPendingReadyList( void )
{
/* Are there any co-routines waiting to get moved to the ready list? These
* are co-routines that have been readied by an ISR. The ISR cannot access
* the ready lists itself. */
while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE )
{
CRCB_t * pxUnblockedCRCB;
/* The pending ready list can be accessed by an ISR. */
portDISABLE_INTERRUPTS();
{
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( ( &xPendingReadyCoRoutineList ) );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
}
portENABLE_INTERRUPTS();
( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) );
prvAddCoRoutineToReadyQueue( pxUnblockedCRCB );
}
}
/*-----------------------------------------------------------*/
static void prvCheckDelayedList( void )
{
CRCB_t * pxCRCB;
xPassedTicks = xTaskGetTickCount() - xLastTickCount;
while( xPassedTicks )
{
xCoRoutineTickCount++;
xPassedTicks--;
/* If the tick count has overflowed we need to swap the ready lists. */
if( xCoRoutineTickCount == 0 )
{
List_t * pxTemp;
/* Tick count has overflowed so we need to swap the delay lists. If there are
* any items in pxDelayedCoRoutineList here then there is an error! */
pxTemp = pxDelayedCoRoutineList;
pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList;
pxOverflowDelayedCoRoutineList = pxTemp;
}
/* See if this tick has made a timeout expire. */
while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE )
{
pxCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList );
if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) )
{
/* Timeout not yet expired. */
break;
}
portDISABLE_INTERRUPTS();
{
/* The event could have occurred just before this critical
* section. If this is the case then the generic list item will
* have been moved to the pending ready list and the following
* line is still valid. Also the pvContainer parameter will have
* been set to NULL so the following lines are also valid. */
( void ) uxListRemove( &( pxCRCB->xGenericListItem ) );
/* Is the co-routine waiting on an event also? */
if( pxCRCB->xEventListItem.pxContainer )
{
( void ) uxListRemove( &( pxCRCB->xEventListItem ) );
}
}
portENABLE_INTERRUPTS();
prvAddCoRoutineToReadyQueue( pxCRCB );
}
}
xLastTickCount = xCoRoutineTickCount;
}
/*-----------------------------------------------------------*/
void vCoRoutineSchedule( void )
{
traceENTER_vCoRoutineSchedule();
/* Only run a co-routine after prvInitialiseCoRoutineLists() has been
* called. prvInitialiseCoRoutineLists() is called automatically when a
* co-routine is created. */
if( pxDelayedCoRoutineList != NULL )
{
/* See if any co-routines readied by events need moving to the ready lists. */
prvCheckPendingReadyList();
/* See if any delayed co-routines have timed out. */
prvCheckDelayedList();
/* Find the highest priority queue that contains ready co-routines. */
while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) )
{
if( uxTopCoRoutineReadyPriority == 0 )
{
/* No more co-routines to check. */
return;
}
--uxTopCoRoutineReadyPriority;
}
/* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
* of the same priority get an equal share of the processor time. */
listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
/* Call the co-routine. */
( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex );
}
traceRETURN_vCoRoutineSchedule();
}
/*-----------------------------------------------------------*/
static void prvInitialiseCoRoutineLists( void )
{
UBaseType_t uxPriority;
for( uxPriority = 0; uxPriority < configMAX_CO_ROUTINE_PRIORITIES; uxPriority++ )
{
vListInitialise( ( List_t * ) &( pxReadyCoRoutineLists[ uxPriority ] ) );
}
vListInitialise( ( List_t * ) &xDelayedCoRoutineList1 );
vListInitialise( ( List_t * ) &xDelayedCoRoutineList2 );
vListInitialise( ( List_t * ) &xPendingReadyCoRoutineList );
/* Start with pxDelayedCoRoutineList using list1 and the
* pxOverflowDelayedCoRoutineList using list2. */
pxDelayedCoRoutineList = &xDelayedCoRoutineList1;
pxOverflowDelayedCoRoutineList = &xDelayedCoRoutineList2;
}
/*-----------------------------------------------------------*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList )
{
CRCB_t * pxUnblockedCRCB;
BaseType_t xReturn;
traceENTER_xCoRoutineRemoveFromEventList( pxEventList );
/* This function is called from within an interrupt. It can only access
* event lists and the pending ready list. This function assumes that a
* check has already been made to ensure pxEventList is not empty. */
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
vListInsertEnd( ( List_t * ) &( xPendingReadyCoRoutineList ), &( pxUnblockedCRCB->xEventListItem ) );
if( pxUnblockedCRCB->uxPriority >= pxCurrentCoRoutine->uxPriority )
{
xReturn = pdTRUE;
}
else
{
xReturn = pdFALSE;
}
traceRETURN_xCoRoutineRemoveFromEventList( xReturn );
return xReturn;
}
/*-----------------------------------------------------------*/
/*
* Reset state in this file. This state is normally initialized at start up.
* This function must be called by the application before restarting the
* scheduler.
*/
void vCoRoutineResetState( void )
{
/* Lists for ready and blocked co-routines. */
pxDelayedCoRoutineList = NULL;
pxOverflowDelayedCoRoutineList = NULL;
/* Other file private variables. */
pxCurrentCoRoutine = NULL;
uxTopCoRoutineReadyPriority = ( UBaseType_t ) 0U;
xCoRoutineTickCount = ( TickType_t ) 0U;
xLastTickCount = ( TickType_t ) 0U;
xPassedTicks = ( TickType_t ) 0U;
}
/*-----------------------------------------------------------*/
#endif /* configUSE_CO_ROUTINES == 0 */

31
freertos/cspell.config.yaml Normal file
View File

@ -0,0 +1,31 @@
---
$schema: https://raw.githubusercontent.com/streetsidesoftware/cspell/main/cspell.schema.json
version: '0.2'
# Allows things like stringLength
allowCompoundWords: true
# Read files not to spell check from the git ignore
useGitignore: true
# Language settings for C
languageSettings:
- caseSensitive: false
enabled: true
languageId: c
locale: "*"
# Add a dictionary, and the path to the word list
dictionaryDefinitions:
- name: freertos-words
path: '.github/.cSpellWords.txt'
addWords: true
dictionaries:
- freertos-words
# Paths and files to ignore
ignorePaths:
- 'dependency'
- 'docs'
- 'ThirdParty'
- 'History.txt'

884
freertos/event_groups.c Normal file
View File

@ -0,0 +1,884 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/* Standard includes. */
#include <stdlib.h>
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
* all the API functions to use the MPU wrappers. That should only be done when
* task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/* FreeRTOS includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "timers.h"
#include "event_groups.h"
/* The MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined
* for the header files above, but not in this file, in order to generate the
* correct privileged Vs unprivileged linkage and placement. */
#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/* This entire source file will be skipped if the application is not configured
* to include event groups functionality. This #if is closed at the very bottom
* of this file. If you want to include event groups then ensure
* configUSE_EVENT_GROUPS is set to 1 in FreeRTOSConfig.h. */
#if ( configUSE_EVENT_GROUPS == 1 )
typedef struct EventGroupDef_t
{
EventBits_t uxEventBits;
List_t xTasksWaitingForBits; /**< List of tasks waiting for a bit to be set. */
#if ( configUSE_TRACE_FACILITY == 1 )
UBaseType_t uxEventGroupNumber;
#endif
#if ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
uint8_t ucStaticallyAllocated; /**< Set to pdTRUE if the event group is statically allocated to ensure no attempt is made to free the memory. */
#endif
} EventGroup_t;
/*-----------------------------------------------------------*/
/*
* Test the bits set in uxCurrentEventBits to see if the wait condition is met.
* The wait condition is defined by xWaitForAllBits. If xWaitForAllBits is
* pdTRUE then the wait condition is met if all the bits set in uxBitsToWaitFor
* are also set in uxCurrentEventBits. If xWaitForAllBits is pdFALSE then the
* wait condition is met if any of the bits set in uxBitsToWait for are also set
* in uxCurrentEventBits.
*/
static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits,
const EventBits_t uxBitsToWaitFor,
const BaseType_t xWaitForAllBits ) PRIVILEGED_FUNCTION;
/*-----------------------------------------------------------*/
#if ( configSUPPORT_STATIC_ALLOCATION == 1 )
EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t * pxEventGroupBuffer )
{
EventGroup_t * pxEventBits;
traceENTER_xEventGroupCreateStatic( pxEventGroupBuffer );
/* A StaticEventGroup_t object must be provided. */
configASSERT( pxEventGroupBuffer );
#if ( configASSERT_DEFINED == 1 )
{
/* Sanity check that the size of the structure used to declare a
* variable of type StaticEventGroup_t equals the size of the real
* event group structure. */
volatile size_t xSize = sizeof( StaticEventGroup_t );
configASSERT( xSize == sizeof( EventGroup_t ) );
}
#endif /* configASSERT_DEFINED */
/* The user has provided a statically allocated event group - use it. */
/* MISRA Ref 11.3.1 [Misaligned access] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-113 */
/* coverity[misra_c_2012_rule_11_3_violation] */
pxEventBits = ( EventGroup_t * ) pxEventGroupBuffer;
if( pxEventBits != NULL )
{
pxEventBits->uxEventBits = 0;
vListInitialise( &( pxEventBits->xTasksWaitingForBits ) );
#if ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
{
/* Both static and dynamic allocation can be used, so note that
* this event group was created statically in case the event group
* is later deleted. */
pxEventBits->ucStaticallyAllocated = pdTRUE;
}
#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
traceEVENT_GROUP_CREATE( pxEventBits );
}
else
{
/* xEventGroupCreateStatic should only ever be called with
* pxEventGroupBuffer pointing to a pre-allocated (compile time
* allocated) StaticEventGroup_t variable. */
traceEVENT_GROUP_CREATE_FAILED();
}
traceRETURN_xEventGroupCreateStatic( pxEventBits );
return pxEventBits;
}
#endif /* configSUPPORT_STATIC_ALLOCATION */
/*-----------------------------------------------------------*/
#if ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
EventGroupHandle_t xEventGroupCreate( void )
{
EventGroup_t * pxEventBits;
traceENTER_xEventGroupCreate();
/* MISRA Ref 11.5.1 [Malloc memory assignment] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-115 */
/* coverity[misra_c_2012_rule_11_5_violation] */
pxEventBits = ( EventGroup_t * ) pvPortMalloc( sizeof( EventGroup_t ) );
if( pxEventBits != NULL )
{
pxEventBits->uxEventBits = 0;
vListInitialise( &( pxEventBits->xTasksWaitingForBits ) );
#if ( configSUPPORT_STATIC_ALLOCATION == 1 )
{
/* Both static and dynamic allocation can be used, so note this
* event group was allocated statically in case the event group is
* later deleted. */
pxEventBits->ucStaticallyAllocated = pdFALSE;
}
#endif /* configSUPPORT_STATIC_ALLOCATION */
traceEVENT_GROUP_CREATE( pxEventBits );
}
else
{
traceEVENT_GROUP_CREATE_FAILED();
}
traceRETURN_xEventGroupCreate( pxEventBits );
return pxEventBits;
}
#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
/*-----------------------------------------------------------*/
EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
const EventBits_t uxBitsToWaitFor,
TickType_t xTicksToWait )
{
EventBits_t uxOriginalBitValue, uxReturn;
EventGroup_t * pxEventBits = xEventGroup;
BaseType_t xAlreadyYielded;
BaseType_t xTimeoutOccurred = pdFALSE;
traceENTER_xEventGroupSync( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTicksToWait );
configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
configASSERT( uxBitsToWaitFor != 0 );
#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
{
configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
}
#endif
vTaskSuspendAll();
{
uxOriginalBitValue = pxEventBits->uxEventBits;
( void ) xEventGroupSetBits( xEventGroup, uxBitsToSet );
if( ( ( uxOriginalBitValue | uxBitsToSet ) & uxBitsToWaitFor ) == uxBitsToWaitFor )
{
/* All the rendezvous bits are now set - no need to block. */
uxReturn = ( uxOriginalBitValue | uxBitsToSet );
/* Rendezvous always clear the bits. They will have been cleared
* already unless this is the only task in the rendezvous. */
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
xTicksToWait = 0;
}
else
{
if( xTicksToWait != ( TickType_t ) 0 )
{
traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor );
/* Store the bits that the calling task is waiting for in the
* task's event list item so the kernel knows when a match is
* found. Then enter the blocked state. */
vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | eventCLEAR_EVENTS_ON_EXIT_BIT | eventWAIT_FOR_ALL_BITS ), xTicksToWait );
/* This assignment is obsolete as uxReturn will get set after
* the task unblocks, but some compilers mistakenly generate a
* warning about uxReturn being returned without being set if the
* assignment is omitted. */
uxReturn = 0;
}
else
{
/* The rendezvous bits were not set, but no block time was
* specified - just return the current event bit value. */
uxReturn = pxEventBits->uxEventBits;
xTimeoutOccurred = pdTRUE;
}
}
}
xAlreadyYielded = xTaskResumeAll();
if( xTicksToWait != ( TickType_t ) 0 )
{
if( xAlreadyYielded == pdFALSE )
{
taskYIELD_WITHIN_API();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* The task blocked to wait for its required bits to be set - at this
* point either the required bits were set or the block time expired. If
* the required bits were set they will have been stored in the task's
* event list item, and they should now be retrieved then cleared. */
uxReturn = uxTaskResetEventItemValue();
if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 )
{
/* The task timed out, just return the current event bit value. */
taskENTER_CRITICAL();
{
uxReturn = pxEventBits->uxEventBits;
/* Although the task got here because it timed out before the
* bits it was waiting for were set, it is possible that since it
* unblocked another task has set the bits. If this is the case
* then it needs to clear the bits before exiting. */
if( ( uxReturn & uxBitsToWaitFor ) == uxBitsToWaitFor )
{
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
taskEXIT_CRITICAL();
xTimeoutOccurred = pdTRUE;
}
else
{
/* The task unblocked because the bits were set. */
}
/* Control bits might be set as the task had blocked should not be
* returned. */
uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES;
}
traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred );
/* Prevent compiler warnings when trace macros are not used. */
( void ) xTimeoutOccurred;
traceRETURN_xEventGroupSync( uxReturn );
return uxReturn;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToWaitFor,
const BaseType_t xClearOnExit,
const BaseType_t xWaitForAllBits,
TickType_t xTicksToWait )
{
EventGroup_t * pxEventBits = xEventGroup;
EventBits_t uxReturn, uxControlBits = 0;
BaseType_t xWaitConditionMet, xAlreadyYielded;
BaseType_t xTimeoutOccurred = pdFALSE;
traceENTER_xEventGroupWaitBits( xEventGroup, uxBitsToWaitFor, xClearOnExit, xWaitForAllBits, xTicksToWait );
/* Check the user is not attempting to wait on the bits used by the kernel
* itself, and that at least one bit is being requested. */
configASSERT( xEventGroup );
configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
configASSERT( uxBitsToWaitFor != 0 );
#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
{
configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
}
#endif
vTaskSuspendAll();
{
const EventBits_t uxCurrentEventBits = pxEventBits->uxEventBits;
/* Check to see if the wait condition is already met or not. */
xWaitConditionMet = prvTestWaitCondition( uxCurrentEventBits, uxBitsToWaitFor, xWaitForAllBits );
if( xWaitConditionMet != pdFALSE )
{
/* The wait condition has already been met so there is no need to
* block. */
uxReturn = uxCurrentEventBits;
xTicksToWait = ( TickType_t ) 0;
/* Clear the wait bits if requested to do so. */
if( xClearOnExit != pdFALSE )
{
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else if( xTicksToWait == ( TickType_t ) 0 )
{
/* The wait condition has not been met, but no block time was
* specified, so just return the current value. */
uxReturn = uxCurrentEventBits;
xTimeoutOccurred = pdTRUE;
}
else
{
/* The task is going to block to wait for its required bits to be
* set. uxControlBits are used to remember the specified behaviour of
* this call to xEventGroupWaitBits() - for use when the event bits
* unblock the task. */
if( xClearOnExit != pdFALSE )
{
uxControlBits |= eventCLEAR_EVENTS_ON_EXIT_BIT;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
if( xWaitForAllBits != pdFALSE )
{
uxControlBits |= eventWAIT_FOR_ALL_BITS;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* Store the bits that the calling task is waiting for in the
* task's event list item so the kernel knows when a match is
* found. Then enter the blocked state. */
vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | uxControlBits ), xTicksToWait );
/* This is obsolete as it will get set after the task unblocks, but
* some compilers mistakenly generate a warning about the variable
* being returned without being set if it is not done. */
uxReturn = 0;
traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor );
}
}
xAlreadyYielded = xTaskResumeAll();
if( xTicksToWait != ( TickType_t ) 0 )
{
if( xAlreadyYielded == pdFALSE )
{
taskYIELD_WITHIN_API();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* The task blocked to wait for its required bits to be set - at this
* point either the required bits were set or the block time expired. If
* the required bits were set they will have been stored in the task's
* event list item, and they should now be retrieved then cleared. */
uxReturn = uxTaskResetEventItemValue();
if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 )
{
taskENTER_CRITICAL();
{
/* The task timed out, just return the current event bit value. */
uxReturn = pxEventBits->uxEventBits;
/* It is possible that the event bits were updated between this
* task leaving the Blocked state and running again. */
if( prvTestWaitCondition( uxReturn, uxBitsToWaitFor, xWaitForAllBits ) != pdFALSE )
{
if( xClearOnExit != pdFALSE )
{
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
mtCOVERAGE_TEST_MARKER();
}
xTimeoutOccurred = pdTRUE;
}
taskEXIT_CRITICAL();
}
else
{
/* The task unblocked because the bits were set. */
}
/* The task blocked so control bits may have been set. */
uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES;
}
traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred );
/* Prevent compiler warnings when trace macros are not used. */
( void ) xTimeoutOccurred;
traceRETURN_xEventGroupWaitBits( uxReturn );
return uxReturn;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear )
{
EventGroup_t * pxEventBits = xEventGroup;
EventBits_t uxReturn;
traceENTER_xEventGroupClearBits( xEventGroup, uxBitsToClear );
/* Check the user is not attempting to clear the bits used by the kernel
* itself. */
configASSERT( xEventGroup );
configASSERT( ( uxBitsToClear & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
taskENTER_CRITICAL();
{
traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear );
/* The value returned is the event group value prior to the bits being
* cleared. */
uxReturn = pxEventBits->uxEventBits;
/* Clear the bits. */
pxEventBits->uxEventBits &= ~uxBitsToClear;
}
taskEXIT_CRITICAL();
traceRETURN_xEventGroupClearBits( uxReturn );
return uxReturn;
}
/*-----------------------------------------------------------*/
#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) )
BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear )
{
BaseType_t xReturn;
traceENTER_xEventGroupClearBitsFromISR( xEventGroup, uxBitsToClear );
traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear );
xReturn = xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL );
traceRETURN_xEventGroupClearBitsFromISR( xReturn );
return xReturn;
}
#endif /* if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) ) */
/*-----------------------------------------------------------*/
EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup )
{
UBaseType_t uxSavedInterruptStatus;
EventGroup_t const * const pxEventBits = xEventGroup;
EventBits_t uxReturn;
traceENTER_xEventGroupGetBitsFromISR( xEventGroup );
/* MISRA Ref 4.7.1 [Return value shall be checked] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#dir-47 */
/* coverity[misra_c_2012_directive_4_7_violation] */
uxSavedInterruptStatus = taskENTER_CRITICAL_FROM_ISR();
{
uxReturn = pxEventBits->uxEventBits;
}
taskEXIT_CRITICAL_FROM_ISR( uxSavedInterruptStatus );
traceRETURN_xEventGroupGetBitsFromISR( uxReturn );
return uxReturn;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet )
{
ListItem_t * pxListItem;
ListItem_t * pxNext;
ListItem_t const * pxListEnd;
List_t const * pxList;
EventBits_t uxBitsToClear = 0, uxBitsWaitedFor, uxControlBits;
EventGroup_t * pxEventBits = xEventGroup;
BaseType_t xMatchFound = pdFALSE;
traceENTER_xEventGroupSetBits( xEventGroup, uxBitsToSet );
/* Check the user is not attempting to set the bits used by the kernel
* itself. */
configASSERT( xEventGroup );
configASSERT( ( uxBitsToSet & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
pxList = &( pxEventBits->xTasksWaitingForBits );
pxListEnd = listGET_END_MARKER( pxList );
vTaskSuspendAll();
{
traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet );
pxListItem = listGET_HEAD_ENTRY( pxList );
/* Set the bits. */
pxEventBits->uxEventBits |= uxBitsToSet;
/* See if the new bit value should unblock any tasks. */
while( pxListItem != pxListEnd )
{
pxNext = listGET_NEXT( pxListItem );
uxBitsWaitedFor = listGET_LIST_ITEM_VALUE( pxListItem );
xMatchFound = pdFALSE;
/* Split the bits waited for from the control bits. */
uxControlBits = uxBitsWaitedFor & eventEVENT_BITS_CONTROL_BYTES;
uxBitsWaitedFor &= ~eventEVENT_BITS_CONTROL_BYTES;
if( ( uxControlBits & eventWAIT_FOR_ALL_BITS ) == ( EventBits_t ) 0 )
{
/* Just looking for single bit being set. */
if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) != ( EventBits_t ) 0 )
{
xMatchFound = pdTRUE;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) == uxBitsWaitedFor )
{
/* All bits are set. */
xMatchFound = pdTRUE;
}
else
{
/* Need all bits to be set, but not all the bits were set. */
}
if( xMatchFound != pdFALSE )
{
/* The bits match. Should the bits be cleared on exit? */
if( ( uxControlBits & eventCLEAR_EVENTS_ON_EXIT_BIT ) != ( EventBits_t ) 0 )
{
uxBitsToClear |= uxBitsWaitedFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* Store the actual event flag value in the task's event list
* item before removing the task from the event list. The
* eventUNBLOCKED_DUE_TO_BIT_SET bit is set so the task knows
* that is was unblocked due to its required bits matching, rather
* than because it timed out. */
vTaskRemoveFromUnorderedEventList( pxListItem, pxEventBits->uxEventBits | eventUNBLOCKED_DUE_TO_BIT_SET );
}
/* Move onto the next list item. Note pxListItem->pxNext is not
* used here as the list item may have been removed from the event list
* and inserted into the ready/pending reading list. */
pxListItem = pxNext;
}
/* Clear any bits that matched when the eventCLEAR_EVENTS_ON_EXIT_BIT
* bit was set in the control word. */
pxEventBits->uxEventBits &= ~uxBitsToClear;
}
( void ) xTaskResumeAll();
traceRETURN_xEventGroupSetBits( pxEventBits->uxEventBits );
return pxEventBits->uxEventBits;
}
/*-----------------------------------------------------------*/
void vEventGroupDelete( EventGroupHandle_t xEventGroup )
{
EventGroup_t * pxEventBits = xEventGroup;
const List_t * pxTasksWaitingForBits;
traceENTER_vEventGroupDelete( xEventGroup );
configASSERT( pxEventBits );
pxTasksWaitingForBits = &( pxEventBits->xTasksWaitingForBits );
vTaskSuspendAll();
{
traceEVENT_GROUP_DELETE( xEventGroup );
while( listCURRENT_LIST_LENGTH( pxTasksWaitingForBits ) > ( UBaseType_t ) 0 )
{
/* Unblock the task, returning 0 as the event list is being deleted
* and cannot therefore have any bits set. */
configASSERT( pxTasksWaitingForBits->xListEnd.pxNext != ( const ListItem_t * ) &( pxTasksWaitingForBits->xListEnd ) );
vTaskRemoveFromUnorderedEventList( pxTasksWaitingForBits->xListEnd.pxNext, eventUNBLOCKED_DUE_TO_BIT_SET );
}
}
( void ) xTaskResumeAll();
#if ( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
{
/* The event group can only have been allocated dynamically - free
* it again. */
vPortFree( pxEventBits );
}
#elif ( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
{
/* The event group could have been allocated statically or
* dynamically, so check before attempting to free the memory. */
if( pxEventBits->ucStaticallyAllocated == ( uint8_t ) pdFALSE )
{
vPortFree( pxEventBits );
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
traceRETURN_vEventGroupDelete();
}
/*-----------------------------------------------------------*/
#if ( configSUPPORT_STATIC_ALLOCATION == 1 )
BaseType_t xEventGroupGetStaticBuffer( EventGroupHandle_t xEventGroup,
StaticEventGroup_t ** ppxEventGroupBuffer )
{
BaseType_t xReturn;
EventGroup_t * pxEventBits = xEventGroup;
traceENTER_xEventGroupGetStaticBuffer( xEventGroup, ppxEventGroupBuffer );
configASSERT( pxEventBits );
configASSERT( ppxEventGroupBuffer );
#if ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
{
/* Check if the event group was statically allocated. */
if( pxEventBits->ucStaticallyAllocated == ( uint8_t ) pdTRUE )
{
/* MISRA Ref 11.3.1 [Misaligned access] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-113 */
/* coverity[misra_c_2012_rule_11_3_violation] */
*ppxEventGroupBuffer = ( StaticEventGroup_t * ) pxEventBits;
xReturn = pdTRUE;
}
else
{
xReturn = pdFALSE;
}
}
#else /* configSUPPORT_DYNAMIC_ALLOCATION */
{
/* Event group must have been statically allocated. */
/* MISRA Ref 11.3.1 [Misaligned access] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-113 */
/* coverity[misra_c_2012_rule_11_3_violation] */
*ppxEventGroupBuffer = ( StaticEventGroup_t * ) pxEventBits;
xReturn = pdTRUE;
}
#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
traceRETURN_xEventGroupGetStaticBuffer( xReturn );
return xReturn;
}
#endif /* configSUPPORT_STATIC_ALLOCATION */
/*-----------------------------------------------------------*/
/* For internal use only - execute a 'set bits' command that was pended from
* an interrupt. */
void vEventGroupSetBitsCallback( void * pvEventGroup,
uint32_t ulBitsToSet )
{
traceENTER_vEventGroupSetBitsCallback( pvEventGroup, ulBitsToSet );
/* MISRA Ref 11.5.4 [Callback function parameter] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-115 */
/* coverity[misra_c_2012_rule_11_5_violation] */
( void ) xEventGroupSetBits( pvEventGroup, ( EventBits_t ) ulBitsToSet );
traceRETURN_vEventGroupSetBitsCallback();
}
/*-----------------------------------------------------------*/
/* For internal use only - execute a 'clear bits' command that was pended from
* an interrupt. */
void vEventGroupClearBitsCallback( void * pvEventGroup,
uint32_t ulBitsToClear )
{
traceENTER_vEventGroupClearBitsCallback( pvEventGroup, ulBitsToClear );
/* MISRA Ref 11.5.4 [Callback function parameter] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-115 */
/* coverity[misra_c_2012_rule_11_5_violation] */
( void ) xEventGroupClearBits( pvEventGroup, ( EventBits_t ) ulBitsToClear );
traceRETURN_vEventGroupClearBitsCallback();
}
/*-----------------------------------------------------------*/
static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits,
const EventBits_t uxBitsToWaitFor,
const BaseType_t xWaitForAllBits )
{
BaseType_t xWaitConditionMet = pdFALSE;
if( xWaitForAllBits == pdFALSE )
{
/* Task only has to wait for one bit within uxBitsToWaitFor to be
* set. Is one already set? */
if( ( uxCurrentEventBits & uxBitsToWaitFor ) != ( EventBits_t ) 0 )
{
xWaitConditionMet = pdTRUE;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
/* Task has to wait for all the bits in uxBitsToWaitFor to be set.
* Are they set already? */
if( ( uxCurrentEventBits & uxBitsToWaitFor ) == uxBitsToWaitFor )
{
xWaitConditionMet = pdTRUE;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
return xWaitConditionMet;
}
/*-----------------------------------------------------------*/
#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) )
BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
BaseType_t * pxHigherPriorityTaskWoken )
{
BaseType_t xReturn;
traceENTER_xEventGroupSetBitsFromISR( xEventGroup, uxBitsToSet, pxHigherPriorityTaskWoken );
traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet );
xReturn = xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken );
traceRETURN_xEventGroupSetBitsFromISR( xReturn );
return xReturn;
}
#endif /* if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) ) */
/*-----------------------------------------------------------*/
#if ( configUSE_TRACE_FACILITY == 1 )
UBaseType_t uxEventGroupGetNumber( void * xEventGroup )
{
UBaseType_t xReturn;
/* MISRA Ref 11.5.2 [Opaque pointer] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-115 */
/* coverity[misra_c_2012_rule_11_5_violation] */
EventGroup_t const * pxEventBits = ( EventGroup_t * ) xEventGroup;
traceENTER_uxEventGroupGetNumber( xEventGroup );
if( xEventGroup == NULL )
{
xReturn = 0;
}
else
{
xReturn = pxEventBits->uxEventGroupNumber;
}
traceRETURN_uxEventGroupGetNumber( xReturn );
return xReturn;
}
#endif /* configUSE_TRACE_FACILITY */
/*-----------------------------------------------------------*/
#if ( configUSE_TRACE_FACILITY == 1 )
void vEventGroupSetNumber( void * xEventGroup,
UBaseType_t uxEventGroupNumber )
{
traceENTER_vEventGroupSetNumber( xEventGroup, uxEventGroupNumber );
/* MISRA Ref 11.5.2 [Opaque pointer] */
/* More details at: https://github.com/FreeRTOS/FreeRTOS-Kernel/blob/main/MISRA.md#rule-115 */
/* coverity[misra_c_2012_rule_11_5_violation] */
( ( EventGroup_t * ) xEventGroup )->uxEventGroupNumber = uxEventGroupNumber;
traceRETURN_vEventGroupSetNumber();
}
#endif /* configUSE_TRACE_FACILITY */
/*-----------------------------------------------------------*/
/* This entire source file will be skipped if the application is not configured
* to include event groups functionality. If you want to include event groups
* then ensure configUSE_EVENT_GROUPS is set to 1 in FreeRTOSConfig.h. */
#endif /* configUSE_EVENT_GROUPS == 1 */

15
freertos/include/CMakeLists.txt Normal file
View File

@ -0,0 +1,15 @@
# FreeRTOS internal cmake file. Do not use it in user top-level project
add_library(freertos_kernel_include INTERFACE)
target_include_directories(freertos_kernel_include
INTERFACE
.
# Note: DEPRECATED but still supported, may be removed in a future release.
$<$<NOT:$<TARGET_EXISTS:freertos_config>>:${FREERTOS_CONFIG_FILE_DIRECTORY}>
)
target_link_libraries(freertos_kernel_include
INTERFACE
$<$<TARGET_EXISTS:freertos_config>:freertos_config>
)

3334
freertos/include/FreeRTOS.h Normal file
View File

File diff suppressed because it is too large Load Diff

34
freertos/include/StackMacros.h Normal file
View File

@ -0,0 +1,34 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef _MSC_VER /* Visual Studio doesn't support #warning. */
#warning The name of this file has changed to stack_macros.h. Please update your code accordingly. This source file (which has the original name) will be removed in a future release.
#endif
#include "stack_macros.h"

427
freertos/include/atomic.h Normal file
View File

@ -0,0 +1,427 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/**
* @file atomic.h
* @brief FreeRTOS atomic operation support.
*
* This file implements atomic functions by disabling interrupts globally.
* Implementations with architecture specific atomic instructions can be
* provided under each compiler directory.
*
* The atomic interface can be used in FreeRTOS tasks on all FreeRTOS ports. It
* can also be used in Interrupt Service Routines (ISRs) on FreeRTOS ports that
* support nested interrupts (i.e. portHAS_NESTED_INTERRUPTS is set to 1). The
* atomic interface must not be used in ISRs on FreeRTOS ports that do not
* support nested interrupts (i.e. portHAS_NESTED_INTERRUPTS is set to 0)
* because ISRs on these ports cannot be interrupted and therefore, do not need
* atomics in ISRs.
*/
#ifndef ATOMIC_H
#define ATOMIC_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include atomic.h"
#endif
/* Standard includes. */
#include <stdint.h>
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/*
* Port specific definitions -- entering/exiting critical section.
* Refer template -- ./lib/FreeRTOS/portable/Compiler/Arch/portmacro.h
*
* Every call to ATOMIC_EXIT_CRITICAL() must be closely paired with
* ATOMIC_ENTER_CRITICAL().
*
*/
#if ( portHAS_NESTED_INTERRUPTS == 1 )
/* Nested interrupt scheme is supported in this port. */
#define ATOMIC_ENTER_CRITICAL() \
UBaseType_t uxCriticalSectionType = portSET_INTERRUPT_MASK_FROM_ISR()
#define ATOMIC_EXIT_CRITICAL() \
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxCriticalSectionType )
#else
/* Nested interrupt scheme is NOT supported in this port. */
#define ATOMIC_ENTER_CRITICAL() portENTER_CRITICAL()
#define ATOMIC_EXIT_CRITICAL() portEXIT_CRITICAL()
#endif /* portSET_INTERRUPT_MASK_FROM_ISR() */
/*
* Port specific definition -- "always inline".
* Inline is compiler specific, and may not always get inlined depending on your
* optimization level. Also, inline is considered as performance optimization
* for atomic. Thus, if portFORCE_INLINE is not provided by portmacro.h,
* instead of resulting error, simply define it away.
*/
#ifndef portFORCE_INLINE
#define portFORCE_INLINE
#endif
#define ATOMIC_COMPARE_AND_SWAP_SUCCESS 0x1U /**< Compare and swap succeeded, swapped. */
#define ATOMIC_COMPARE_AND_SWAP_FAILURE 0x0U /**< Compare and swap failed, did not swap. */
/*----------------------------- Swap && CAS ------------------------------*/
/**
* Atomic compare-and-swap
*
* @brief Performs an atomic compare-and-swap operation on the specified values.
*
* @param[in, out] pulDestination Pointer to memory location from where value is
* to be loaded and checked.
* @param[in] ulExchange If condition meets, write this value to memory.
* @param[in] ulComparand Swap condition.
*
* @return Unsigned integer of value 1 or 0. 1 for swapped, 0 for not swapped.
*
* @note This function only swaps *pulDestination with ulExchange, if previous
* *pulDestination value equals ulComparand.
*/
static portFORCE_INLINE uint32_t Atomic_CompareAndSwap_u32( uint32_t volatile * pulDestination,
uint32_t ulExchange,
uint32_t ulComparand )
{
uint32_t ulReturnValue;
ATOMIC_ENTER_CRITICAL();
{
if( *pulDestination == ulComparand )
{
*pulDestination = ulExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
else
{
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
}
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
}
/*-----------------------------------------------------------*/
/**
* Atomic swap (pointers)
*
* @brief Atomically sets the address pointed to by *ppvDestination to the value
* of *pvExchange.
*
* @param[in, out] ppvDestination Pointer to memory location from where a pointer
* value is to be loaded and written back to.
* @param[in] pvExchange Pointer value to be written to *ppvDestination.
*
* @return The initial value of *ppvDestination.
*/
static portFORCE_INLINE void * Atomic_SwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange )
{
void * pReturnValue;
ATOMIC_ENTER_CRITICAL();
{
pReturnValue = *ppvDestination;
*ppvDestination = pvExchange;
}
ATOMIC_EXIT_CRITICAL();
return pReturnValue;
}
/*-----------------------------------------------------------*/
/**
* Atomic compare-and-swap (pointers)
*
* @brief Performs an atomic compare-and-swap operation on the specified pointer
* values.
*
* @param[in, out] ppvDestination Pointer to memory location from where a pointer
* value is to be loaded and checked.
* @param[in] pvExchange If condition meets, write this value to memory.
* @param[in] pvComparand Swap condition.
*
* @return Unsigned integer of value 1 or 0. 1 for swapped, 0 for not swapped.
*
* @note This function only swaps *ppvDestination with pvExchange, if previous
* *ppvDestination value equals pvComparand.
*/
static portFORCE_INLINE uint32_t Atomic_CompareAndSwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange,
void * pvComparand )
{
uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
ATOMIC_ENTER_CRITICAL();
{
if( *ppvDestination == pvComparand )
{
*ppvDestination = pvExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
}
/*----------------------------- Arithmetic ------------------------------*/
/**
* Atomic add
*
* @brief Atomically adds count to the value of the specified pointer points to.
*
* @param[in,out] pulAddend Pointer to memory location from where value is to be
* loaded and written back to.
* @param[in] ulCount Value to be added to *pulAddend.
*
* @return previous *pulAddend value.
*/
static portFORCE_INLINE uint32_t Atomic_Add_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
* Atomic subtract
*
* @brief Atomically subtracts count from the value of the specified pointer
* pointers to.
*
* @param[in,out] pulAddend Pointer to memory location from where value is to be
* loaded and written back to.
* @param[in] ulCount Value to be subtract from *pulAddend.
*
* @return previous *pulAddend value.
*/
static portFORCE_INLINE uint32_t Atomic_Subtract_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
* Atomic increment
*
* @brief Atomically increments the value of the specified pointer points to.
*
* @param[in,out] pulAddend Pointer to memory location from where value is to be
* loaded and written back to.
*
* @return *pulAddend value before increment.
*/
static portFORCE_INLINE uint32_t Atomic_Increment_u32( uint32_t volatile * pulAddend )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
* Atomic decrement
*
* @brief Atomically decrements the value of the specified pointer points to
*
* @param[in,out] pulAddend Pointer to memory location from where value is to be
* loaded and written back to.
*
* @return *pulAddend value before decrement.
*/
static portFORCE_INLINE uint32_t Atomic_Decrement_u32( uint32_t volatile * pulAddend )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*----------------------------- Bitwise Logical ------------------------------*/
/**
* Atomic OR
*
* @brief Performs an atomic OR operation on the specified values.
*
* @param [in, out] pulDestination Pointer to memory location from where value is
* to be loaded and written back to.
* @param [in] ulValue Value to be ORed with *pulDestination.
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_OR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination |= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
* Atomic AND
*
* @brief Performs an atomic AND operation on the specified values.
*
* @param [in, out] pulDestination Pointer to memory location from where value is
* to be loaded and written back to.
* @param [in] ulValue Value to be ANDed with *pulDestination.
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_AND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination &= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
* Atomic NAND
*
* @brief Performs an atomic NAND operation on the specified values.
*
* @param [in, out] pulDestination Pointer to memory location from where value is
* to be loaded and written back to.
* @param [in] ulValue Value to be NANDed with *pulDestination.
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_NAND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination = ~( ulCurrent & ulValue );
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
* Atomic XOR
*
* @brief Performs an atomic XOR operation on the specified values.
*
* @param [in, out] pulDestination Pointer to memory location from where value is
* to be loaded and written back to.
* @param [in] ulValue Value to be XORed with *pulDestination.
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_XOR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination ^= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* ATOMIC_H */

762
freertos/include/croutine.h Normal file
View File

@ -0,0 +1,762 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef CO_ROUTINE_H
#define CO_ROUTINE_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#endif
#include "list.h"
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/* Used to hide the implementation of the co-routine control block. The
* control block structure however has to be included in the header due to
* the macro implementation of the co-routine functionality. */
typedef void * CoRoutineHandle_t;
/* Defines the prototype to which co-routine functions must conform. */
typedef void (* crCOROUTINE_CODE)( CoRoutineHandle_t xHandle,
UBaseType_t uxIndex );
typedef struct corCoRoutineControlBlock
{
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /**< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /**< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /**< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /**< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /**< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
/**
* croutine. h
* @code{c}
* BaseType_t xCoRoutineCreate(
* crCOROUTINE_CODE pxCoRoutineCode,
* UBaseType_t uxPriority,
* UBaseType_t uxIndex
* );
* @endcode
*
* Create a new co-routine and add it to the list of co-routines that are
* ready to run.
*
* @param pxCoRoutineCode Pointer to the co-routine function. Co-routine
* functions require special syntax - see the co-routine section of the WEB
* documentation for more information.
*
* @param uxPriority The priority with respect to other co-routines at which
* the co-routine will run.
*
* @param uxIndex Used to distinguish between different co-routines that
* execute the same function. See the example below and the co-routine section
* of the WEB documentation for further information.
*
* @return pdPASS if the co-routine was successfully created and added to a ready
* list, otherwise an error code defined with ProjDefs.h.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* // This may not be necessary for const variables.
* static const char cLedToFlash[ 2 ] = { 5, 6 };
* static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // This co-routine just delays for a fixed period, then toggles
* // an LED. Two co-routines are created using this function, so
* // the uxIndex parameter is used to tell the co-routine which
* // LED to flash and how int32_t to delay. This assumes xQueue has
* // already been created.
* vParTestToggleLED( cLedToFlash[ uxIndex ] );
* crDELAY( xHandle, uxFlashRates[ uxIndex ] );
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
*
* // Function that creates two co-routines.
* void vOtherFunction( void )
* {
* uint8_t ucParameterToPass;
* TaskHandle_t xHandle;
*
* // Create two co-routines at priority 0. The first is given index 0
* // so (from the code above) toggles LED 5 every 200 ticks. The second
* // is given index 1 so toggles LED 6 every 400 ticks.
* for( uxIndex = 0; uxIndex < 2; uxIndex++ )
* {
* xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
* }
* }
* @endcode
* \defgroup xCoRoutineCreate xCoRoutineCreate
* \ingroup Tasks
*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex );
/**
* croutine. h
* @code{c}
* void vCoRoutineSchedule( void );
* @endcode
*
* Run a co-routine.
*
* vCoRoutineSchedule() executes the highest priority co-routine that is able
* to run. The co-routine will execute until it either blocks, yields or is
* preempted by a task. Co-routines execute cooperatively so one
* co-routine cannot be preempted by another, but can be preempted by a task.
*
* If an application comprises of both tasks and co-routines then
* vCoRoutineSchedule should be called from the idle task (in an idle task
* hook).
*
* Example usage:
* @code{c}
* // This idle task hook will schedule a co-routine each time it is called.
* // The rest of the idle task will execute between co-routine calls.
* void vApplicationIdleHook( void )
* {
* vCoRoutineSchedule();
* }
*
* // Alternatively, if you do not require any other part of the idle task to
* // execute, the idle task hook can call vCoRoutineSchedule() within an
* // infinite loop.
* void vApplicationIdleHook( void )
* {
* for( ;; )
* {
* vCoRoutineSchedule();
* }
* }
* @endcode
* \defgroup vCoRoutineSchedule vCoRoutineSchedule
* \ingroup Tasks
*/
void vCoRoutineSchedule( void );
/**
* croutine. h
* @code{c}
* crSTART( CoRoutineHandle_t xHandle );
* @endcode
*
* This macro MUST always be called at the start of a co-routine function.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static int32_t ulAVariable;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Co-routine functionality goes here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* @endcode
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crSTART( pxCRCB ) \
switch( ( ( CRCB_t * ) ( pxCRCB ) )->uxState ) { \
case 0:
/**
* croutine. h
* @code{c}
* crEND();
* @endcode
*
* This macro MUST always be called at the end of a co-routine function.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static int32_t ulAVariable;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Co-routine functionality goes here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* @endcode
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crEND() }
/*
* These macros are intended for internal use by the co-routine implementation
* only. The macros should not be used directly by application writers.
*/
#define crSET_STATE0( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( __LINE__ * 2 ); return; \
case ( __LINE__ * 2 ):
#define crSET_STATE1( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( ( __LINE__ * 2 ) + 1 ); return; \
case ( ( __LINE__ * 2 ) + 1 ):
/**
* croutine. h
* @code{c}
* crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );
* @endcode
*
* Delay a co-routine for a fixed period of time.
*
* crDELAY can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* @param xHandle The handle of the co-routine to delay. This is the xHandle
* parameter of the co-routine function.
*
* @param xTickToDelay The number of ticks that the co-routine should delay
* for. The actual amount of time this equates to is defined by
* configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_PERIOD_MS
* can be used to convert ticks to milliseconds.
*
* Example usage:
* @code{c}
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* // This may not be necessary for const variables.
* // We are to delay for 200ms.
* static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Delay for 200ms.
* crDELAY( xHandle, xDelayTime );
*
* // Do something here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* @endcode
* \defgroup crDELAY crDELAY
* \ingroup Tasks
*/
#define crDELAY( xHandle, xTicksToDelay ) \
do { \
if( ( xTicksToDelay ) > 0 ) \
{ \
vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
} \
crSET_STATE0( ( xHandle ) ); \
} while( 0 )
/**
* @code{c}
* crQUEUE_SEND(
* CoRoutineHandle_t xHandle,
* QueueHandle_t pxQueue,
* void *pvItemToQueue,
* TickType_t xTicksToWait,
* BaseType_t *pxResult
* )
* @endcode
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
*
* crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
* xQueueSend() and xQueueReceive() can only be used from tasks.
*
* crQUEUE_SEND can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xHandle The handle of the calling co-routine. This is the xHandle
* parameter of the co-routine function.
*
* @param pxQueue The handle of the queue on which the data will be posted.
* The handle is obtained as the return value when the queue is created using
* the xQueueCreate() API function.
*
* @param pvItemToQueue A pointer to the data being posted onto the queue.
* The number of bytes of each queued item is specified when the queue is
* created. This number of bytes is copied from pvItemToQueue into the queue
* itself.
*
* @param xTickToDelay The number of ticks that the co-routine should block
* to wait for space to become available on the queue, should space not be
* available immediately. The actual amount of time this equates to is defined
* by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
* portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see example
* below).
*
* @param pxResult The variable pointed to by pxResult will be set to pdPASS if
* data was successfully posted onto the queue, otherwise it will be set to an
* error defined within ProjDefs.h.
*
* Example usage:
* @code{c}
* // Co-routine function that blocks for a fixed period then posts a number onto
* // a queue.
* static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static BaseType_t xNumberToPost = 0;
* static BaseType_t xResult;
*
* // Co-routines must begin with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // This assumes the queue has already been created.
* crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
*
* if( xResult != pdPASS )
* {
* // The message was not posted!
* }
*
* // Increment the number to be posted onto the queue.
* xNumberToPost++;
*
* // Delay for 100 ticks.
* crDELAY( xHandle, 100 );
* }
*
* // Co-routines must end with a call to crEND().
* crEND();
* }
* @endcode
* \defgroup crQUEUE_SEND crQUEUE_SEND
* \ingroup Tasks
*/
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
do { \
*( pxResult ) = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \
} \
if( *pxResult == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*pxResult = pdPASS; \
} \
} while( 0 )
/**
* croutine. h
* @code{c}
* crQUEUE_RECEIVE(
* CoRoutineHandle_t xHandle,
* QueueHandle_t pxQueue,
* void *pvBuffer,
* TickType_t xTicksToWait,
* BaseType_t *pxResult
* )
* @endcode
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
*
* crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
* xQueueSend() and xQueueReceive() can only be used from tasks.
*
* crQUEUE_RECEIVE can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xHandle The handle of the calling co-routine. This is the xHandle
* parameter of the co-routine function.
*
* @param pxQueue The handle of the queue from which the data will be received.
* The handle is obtained as the return value when the queue is created using
* the xQueueCreate() API function.
*
* @param pvBuffer The buffer into which the received item is to be copied.
* The number of bytes of each queued item is specified when the queue is
* created. This number of bytes is copied into pvBuffer.
*
* @param xTickToDelay The number of ticks that the co-routine should block
* to wait for data to become available from the queue, should data not be
* available immediately. The actual amount of time this equates to is defined
* by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
* portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see the
* crQUEUE_SEND example).
*
* @param pxResult The variable pointed to by pxResult will be set to pdPASS if
* data was successfully retrieved from the queue, otherwise it will be set to
* an error code as defined within ProjDefs.h.
*
* Example usage:
* @code{c}
* // A co-routine receives the number of an LED to flash from a queue. It
* // blocks on the queue until the number is received.
* static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static BaseType_t xResult;
* static UBaseType_t uxLEDToFlash;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Wait for data to become available on the queue.
* crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
*
* if( xResult == pdPASS )
* {
* // We received the LED to flash - flash it!
* vParTestToggleLED( uxLEDToFlash );
* }
* }
*
* crEND();
* }
* @endcode
* \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
do { \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), 0 ); \
} \
if( *( pxResult ) == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*( pxResult ) = pdPASS; \
} \
} while( 0 )
/**
* croutine. h
* @code{c}
* crQUEUE_SEND_FROM_ISR(
* QueueHandle_t pxQueue,
* void *pvItemToQueue,
* BaseType_t xCoRoutinePreviouslyWoken
* )
* @endcode
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
* functions used by tasks.
*
* crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
* pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
* xQueueReceiveFromISR() can only be used to pass data between a task and and
* ISR.
*
* crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue
* that is being used from within a co-routine.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xQueue The handle to the queue on which the item is to be posted.
*
* @param pvItemToQueue A pointer to the item that is to be placed on the
* queue. The size of the items the queue will hold was defined when the
* queue was created, so this many bytes will be copied from pvItemToQueue
* into the queue storage area.
*
* @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto
* the same queue multiple times from a single interrupt. The first call
* should always pass in pdFALSE. Subsequent calls should pass in
* the value returned from the previous call.
*
* @return pdTRUE if a co-routine was woken by posting onto the queue. This is
* used by the ISR to determine if a context switch may be required following
* the ISR.
*
* Example usage:
* @code{c}
* // A co-routine that blocks on a queue waiting for characters to be received.
* static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* char cRxedChar;
* BaseType_t xResult;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Wait for data to become available on the queue. This assumes the
* // queue xCommsRxQueue has already been created!
* crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
*
* // Was a character received?
* if( xResult == pdPASS )
* {
* // Process the character here.
* }
* }
*
* // All co-routines must end with a call to crEND().
* crEND();
* }
*
* // An ISR that uses a queue to send characters received on a serial port to
* // a co-routine.
* void vUART_ISR( void )
* {
* char cRxedChar;
* BaseType_t xCRWokenByPost = pdFALSE;
*
* // We loop around reading characters until there are none left in the UART.
* while( UART_RX_REG_NOT_EMPTY() )
* {
* // Obtain the character from the UART.
* cRxedChar = UART_RX_REG;
*
* // Post the character onto a queue. xCRWokenByPost will be pdFALSE
* // the first time around the loop. If the post causes a co-routine
* // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
* // In this manner we can ensure that if more than one co-routine is
* // blocked on the queue only one is woken by this ISR no matter how
* // many characters are posted to the queue.
* xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
* }
* }
* @endcode
* \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) \
xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
/**
* croutine. h
* @code{c}
* crQUEUE_SEND_FROM_ISR(
* QueueHandle_t pxQueue,
* void *pvBuffer,
* BaseType_t * pxCoRoutineWoken
* )
* @endcode
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
* functions used by tasks.
*
* crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
* pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
* xQueueReceiveFromISR() can only be used to pass data between a task and and
* ISR.
*
* crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data
* from a queue that is being used from within a co-routine (a co-routine
* posted to the queue).
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xQueue The handle to the queue on which the item is to be posted.
*
* @param pvBuffer A pointer to a buffer into which the received item will be
* placed. The size of the items the queue will hold was defined when the
* queue was created, so this many bytes will be copied from the queue into
* pvBuffer.
*
* @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become
* available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a
* co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise
* *pxCoRoutineWoken will remain unchanged.
*
* @return pdTRUE an item was successfully received from the queue, otherwise
* pdFALSE.
*
* Example usage:
* @code{c}
* // A co-routine that posts a character to a queue then blocks for a fixed
* // period. The character is incremented each time.
* static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // cChar holds its value while this co-routine is blocked and must therefore
* // be declared static.
* static char cCharToTx = 'a';
* BaseType_t xResult;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Send the next character to the queue.
* crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
*
* if( xResult == pdPASS )
* {
* // The character was successfully posted to the queue.
* }
* else
* {
* // Could not post the character to the queue.
* }
*
* // Enable the UART Tx interrupt to cause an interrupt in this
* // hypothetical UART. The interrupt will obtain the character
* // from the queue and send it.
* ENABLE_RX_INTERRUPT();
*
* // Increment to the next character then block for a fixed period.
* // cCharToTx will maintain its value across the delay as it is
* // declared static.
* cCharToTx++;
* if( cCharToTx > 'x' )
* {
* cCharToTx = 'a';
* }
* crDELAY( 100 );
* }
*
* // All co-routines must end with a call to crEND().
* crEND();
* }
*
* // An ISR that uses a queue to receive characters to send on a UART.
* void vUART_ISR( void )
* {
* char cCharToTx;
* BaseType_t xCRWokenByPost = pdFALSE;
*
* while( UART_TX_REG_EMPTY() )
* {
* // Are there any characters in the queue waiting to be sent?
* // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
* // is woken by the post - ensuring that only a single co-routine is
* // woken no matter how many times we go around this loop.
* if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
* {
* SEND_CHARACTER( cCharToTx );
* }
* }
* }
* @endcode
* \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) \
xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
/*
* This function is intended for internal use by the co-routine macros only.
* The macro nature of the co-routine implementation requires that the
* prototype appears here. The function should not be used by application
* writers.
*
* Removes the current co-routine from its ready list and places it in the
* appropriate delayed list.
*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList );
/*
* This function is intended for internal use by the queue implementation only.
* The function should not be used by application writers.
*
* Removes the highest priority co-routine from the event list and places it in
* the pending ready list.
*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList );
/*
* This function resets the internal state of the coroutine module. It must be
* called by the application before restarting the scheduler.
*/
void vCoRoutineResetState( void ) PRIVILEGED_FUNCTION;
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* CO_ROUTINE_H */

281
freertos/include/deprecated_definitions.h Normal file
View File

@ -0,0 +1,281 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef DEPRECATED_DEFINITIONS_H
#define DEPRECATED_DEFINITIONS_H
/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
* pre-processor definition was used to ensure the pre-processor found the correct
* portmacro.h file for the port being used. That scheme was deprecated in favour
* of setting the compiler's include path such that it found the correct
* portmacro.h file - removing the need for the constant and allowing the
* portmacro.h file to be located anywhere in relation to the port being used. The
* definitions below remain in the code for backward compatibility only. New
* projects should not use them. */
#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT
#include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"
typedef void ( __interrupt __far * pxISR )();
#endif
#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT
#include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"
typedef void ( __interrupt __far * pxISR )();
#endif
#ifdef GCC_MEGA_AVR
#include "../portable/GCC/ATMega323/portmacro.h"
#endif
#ifdef IAR_MEGA_AVR
#include "../portable/IAR/ATMega323/portmacro.h"
#endif
#ifdef MPLAB_PIC24_PORT
#include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
#endif
#ifdef MPLAB_DSPIC_PORT
#include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
#endif
#ifdef MPLAB_PIC18F_PORT
#include "../../Source/portable/MPLAB/PIC18F/portmacro.h"
#endif
#ifdef MPLAB_PIC32MX_PORT
#include "../../Source/portable/MPLAB/PIC32MX/portmacro.h"
#endif
#ifdef _FEDPICC
#include "libFreeRTOS/Include/portmacro.h"
#endif
#ifdef SDCC_CYGNAL
#include "../../Source/portable/SDCC/Cygnal/portmacro.h"
#endif
#ifdef GCC_ARM7
#include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"
#endif
#ifdef GCC_ARM7_ECLIPSE
#include "portmacro.h"
#endif
#ifdef ROWLEY_LPC23xx
#include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"
#endif
#ifdef IAR_MSP430
#include "..\..\Source\portable\IAR\MSP430\portmacro.h"
#endif
#ifdef GCC_MSP430
#include "../../Source/portable/GCC/MSP430F449/portmacro.h"
#endif
#ifdef ROWLEY_MSP430
#include "../../Source/portable/Rowley/MSP430F449/portmacro.h"
#endif
#ifdef ARM7_LPC21xx_KEIL_RVDS
#include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"
#endif
#ifdef SAM7_GCC
#include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"
#endif
#ifdef SAM7_IAR
#include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"
#endif
#ifdef SAM9XE_IAR
#include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"
#endif
#ifdef LPC2000_IAR
#include "..\..\Source\portable\IAR\LPC2000\portmacro.h"
#endif
#ifdef STR71X_IAR
#include "..\..\Source\portable\IAR\STR71x\portmacro.h"
#endif
#ifdef STR75X_IAR
#include "..\..\Source\portable\IAR\STR75x\portmacro.h"
#endif
#ifdef STR75X_GCC
#include "..\..\Source\portable\GCC\STR75x\portmacro.h"
#endif
#ifdef STR91X_IAR
#include "..\..\Source\portable\IAR\STR91x\portmacro.h"
#endif
#ifdef GCC_H8S
#include "../../Source/portable/GCC/H8S2329/portmacro.h"
#endif
#ifdef GCC_AT91FR40008
#include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"
#endif
#ifdef RVDS_ARMCM3_LM3S102
#include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"
#endif
#ifdef GCC_ARMCM3_LM3S102
#include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
#endif
#ifdef GCC_ARMCM3
#include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
#endif
#ifdef IAR_ARM_CM3
#include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
#endif
#ifdef IAR_ARMCM3_LM
#include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
#endif
#ifdef HCS12_CODE_WARRIOR
#include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"
#endif
#ifdef MICROBLAZE_GCC
#include "../../Source/portable/GCC/MicroBlaze/portmacro.h"
#endif
#ifdef TERN_EE
#include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"
#endif
#ifdef GCC_HCS12
#include "../../Source/portable/GCC/HCS12/portmacro.h"
#endif
#ifdef GCC_MCF5235
#include "../../Source/portable/GCC/MCF5235/portmacro.h"
#endif
#ifdef COLDFIRE_V2_GCC
#include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"
#endif
#ifdef COLDFIRE_V2_CODEWARRIOR
#include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"
#endif
#ifdef GCC_PPC405
#include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"
#endif
#ifdef GCC_PPC440
#include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"
#endif
#ifdef _16FX_SOFTUNE
#include "..\..\Source\portable\Softune\MB96340\portmacro.h"
#endif
#ifdef BCC_INDUSTRIAL_PC_PORT
/* A short file name has to be used in place of the normal
* FreeRTOSConfig.h when using the Borland compiler. */
#include "frconfig.h"
#include "..\portable\BCC\16BitDOS\PC\prtmacro.h"
typedef void ( __interrupt __far * pxISR )();
#endif
#ifdef BCC_FLASH_LITE_186_PORT
/* A short file name has to be used in place of the normal
* FreeRTOSConfig.h when using the Borland compiler. */
#include "frconfig.h"
#include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"
typedef void ( __interrupt __far * pxISR )();
#endif
#ifdef __GNUC__
#ifdef __AVR32_AVR32A__
#include "portmacro.h"
#endif
#endif
#ifdef __ICCAVR32__
#ifdef __CORE__
#if __CORE__ == __AVR32A__
#include "portmacro.h"
#endif
#endif
#endif
#ifdef __91467D
#include "portmacro.h"
#endif
#ifdef __96340
#include "portmacro.h"
#endif
#ifdef __IAR_V850ES_Fx3__
#include "../../Source/portable/IAR/V850ES/portmacro.h"
#endif
#ifdef __IAR_V850ES_Jx3__
#include "../../Source/portable/IAR/V850ES/portmacro.h"
#endif
#ifdef __IAR_V850ES_Jx3_L__
#include "../../Source/portable/IAR/V850ES/portmacro.h"
#endif
#ifdef __IAR_V850ES_Jx2__
#include "../../Source/portable/IAR/V850ES/portmacro.h"
#endif
#ifdef __IAR_V850ES_Hx2__
#include "../../Source/portable/IAR/V850ES/portmacro.h"
#endif
#ifdef __IAR_78K0R_Kx3__
#include "../../Source/portable/IAR/78K0R/portmacro.h"
#endif
#ifdef __IAR_78K0R_Kx3L__
#include "../../Source/portable/IAR/78K0R/portmacro.h"
#endif
#endif /* DEPRECATED_DEFINITIONS_H */

857
freertos/include/event_groups.h Normal file
View File

@ -0,0 +1,857 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef EVENT_GROUPS_H
#define EVENT_GROUPS_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h" must appear in source files before "include event_groups.h"
#endif
/* FreeRTOS includes. */
#include "timers.h"
/* The following bit fields convey control information in a task's event list
* item value. It is important they don't clash with the
* taskEVENT_LIST_ITEM_VALUE_IN_USE definition. */
#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
#define eventCLEAR_EVENTS_ON_EXIT_BIT ( ( uint16_t ) 0x0100U )
#define eventUNBLOCKED_DUE_TO_BIT_SET ( ( uint16_t ) 0x0200U )
#define eventWAIT_FOR_ALL_BITS ( ( uint16_t ) 0x0400U )
#define eventEVENT_BITS_CONTROL_BYTES ( ( uint16_t ) 0xff00U )
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
#define eventCLEAR_EVENTS_ON_EXIT_BIT ( ( uint32_t ) 0x01000000U )
#define eventUNBLOCKED_DUE_TO_BIT_SET ( ( uint32_t ) 0x02000000U )
#define eventWAIT_FOR_ALL_BITS ( ( uint32_t ) 0x04000000U )
#define eventEVENT_BITS_CONTROL_BYTES ( ( uint32_t ) 0xff000000U )
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_64_BITS )
#define eventCLEAR_EVENTS_ON_EXIT_BIT ( ( uint64_t ) 0x0100000000000000U )
#define eventUNBLOCKED_DUE_TO_BIT_SET ( ( uint64_t ) 0x0200000000000000U )
#define eventWAIT_FOR_ALL_BITS ( ( uint64_t ) 0x0400000000000000U )
#define eventEVENT_BITS_CONTROL_BYTES ( ( uint64_t ) 0xff00000000000000U )
#endif /* if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS ) */
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/**
* An event group is a collection of bits to which an application can assign a
* meaning. For example, an application may create an event group to convey
* the status of various CAN bus related events in which bit 0 might mean "A CAN
* message has been received and is ready for processing", bit 1 might mean "The
* application has queued a message that is ready for sending onto the CAN
* network", and bit 2 might mean "It is time to send a SYNC message onto the
* CAN network" etc. A task can then test the bit values to see which events
* are active, and optionally enter the Blocked state to wait for a specified
* bit or a group of specified bits to be active. To continue the CAN bus
* example, a CAN controlling task can enter the Blocked state (and therefore
* not consume any processing time) until either bit 0, bit 1 or bit 2 are
* active, at which time the bit that was actually active would inform the task
* which action it had to take (process a received message, send a message, or
* send a SYNC).
*
* The event groups implementation contains intelligence to avoid race
* conditions that would otherwise occur were an application to use a simple
* variable for the same purpose. This is particularly important with respect
* to when a bit within an event group is to be cleared, and when bits have to
* be set and then tested atomically - as is the case where event groups are
* used to create a synchronisation point between multiple tasks (a
* 'rendezvous').
*/
/**
* event_groups.h
*
* Type by which event groups are referenced. For example, a call to
* xEventGroupCreate() returns an EventGroupHandle_t variable that can then
* be used as a parameter to other event group functions.
*
* \defgroup EventGroupHandle_t EventGroupHandle_t
* \ingroup EventGroup
*/
struct EventGroupDef_t;
typedef struct EventGroupDef_t * EventGroupHandle_t;
/*
* The type that holds event bits always matches TickType_t - therefore the
* number of bits it holds is set by configTICK_TYPE_WIDTH_IN_BITS (16 bits if set to 0,
* 32 bits if set to 1, 64 bits if set to 2.
*
* \defgroup EventBits_t EventBits_t
* \ingroup EventGroup
*/
typedef TickType_t EventBits_t;
/**
* event_groups.h
* @code{c}
* EventGroupHandle_t xEventGroupCreate( void );
* @endcode
*
* Create a new event group.
*
* Internally, within the FreeRTOS implementation, event groups use a [small]
* block of memory, in which the event group's structure is stored. If an event
* groups is created using xEventGroupCreate() then the required memory is
* automatically dynamically allocated inside the xEventGroupCreate() function.
* (see https://www.FreeRTOS.org/a00111.html). If an event group is created
* using xEventGroupCreateStatic() then the application writer must instead
* provide the memory that will get used by the event group.
* xEventGroupCreateStatic() therefore allows an event group to be created
* without using any dynamic memory allocation.
*
* Although event groups are not related to ticks, for internal implementation
* reasons the number of bits available for use in an event group is dependent
* on the configTICK_TYPE_WIDTH_IN_BITS setting in FreeRTOSConfig.h. If
* configTICK_TYPE_WIDTH_IN_BITS is 0 then each event group contains 8 usable bits (bit
* 0 to bit 7). If configTICK_TYPE_WIDTH_IN_BITS is set to 1 then each event group has
* 24 usable bits (bit 0 to bit 23). If configTICK_TYPE_WIDTH_IN_BITS is set to 2 then
* each event group has 56 usable bits (bit 0 to bit 53). The EventBits_t type
* is used to store event bits within an event group.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupCreate()
* to be available.
*
* @return If the event group was created then a handle to the event group is
* returned. If there was insufficient FreeRTOS heap available to create the
* event group then NULL is returned. See https://www.FreeRTOS.org/a00111.html
*
* Example usage:
* @code{c}
* // Declare a variable to hold the created event group.
* EventGroupHandle_t xCreatedEventGroup;
*
* // Attempt to create the event group.
* xCreatedEventGroup = xEventGroupCreate();
*
* // Was the event group created successfully?
* if( xCreatedEventGroup == NULL )
* {
* // The event group was not created because there was insufficient
* // FreeRTOS heap available.
* }
* else
* {
* // The event group was created.
* }
* @endcode
* \defgroup xEventGroupCreate xEventGroupCreate
* \ingroup EventGroup
*/
#if ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
EventGroupHandle_t xEventGroupCreate( void ) PRIVILEGED_FUNCTION;
#endif
/**
* event_groups.h
* @code{c}
* EventGroupHandle_t xEventGroupCreateStatic( EventGroupHandle_t * pxEventGroupBuffer );
* @endcode
*
* Create a new event group.
*
* Internally, within the FreeRTOS implementation, event groups use a [small]
* block of memory, in which the event group's structure is stored. If an event
* groups is created using xEventGroupCreate() then the required memory is
* automatically dynamically allocated inside the xEventGroupCreate() function.
* (see https://www.FreeRTOS.org/a00111.html). If an event group is created
* using xEventGroupCreateStatic() then the application writer must instead
* provide the memory that will get used by the event group.
* xEventGroupCreateStatic() therefore allows an event group to be created
* without using any dynamic memory allocation.
*
* Although event groups are not related to ticks, for internal implementation
* reasons the number of bits available for use in an event group is dependent
* on the configTICK_TYPE_WIDTH_IN_BITS setting in FreeRTOSConfig.h. If
* configTICK_TYPE_WIDTH_IN_BITS is 0 then each event group contains 8 usable bits (bit
* 0 to bit 7). If configTICK_TYPE_WIDTH_IN_BITS is set to 1 then each event group has
* 24 usable bits (bit 0 to bit 23). If configTICK_TYPE_WIDTH_IN_BITS is set to 2 then
* each event group has 56 usable bits (bit 0 to bit 53). The EventBits_t type
* is used to store event bits within an event group.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupCreateStatic()
* to be available.
*
* @param pxEventGroupBuffer pxEventGroupBuffer must point to a variable of type
* StaticEventGroup_t, which will be then be used to hold the event group's data
* structures, removing the need for the memory to be allocated dynamically.
*
* @return If the event group was created then a handle to the event group is
* returned. If pxEventGroupBuffer was NULL then NULL is returned.
*
* Example usage:
* @code{c}
* // StaticEventGroup_t is a publicly accessible structure that has the same
* // size and alignment requirements as the real event group structure. It is
* // provided as a mechanism for applications to know the size of the event
* // group (which is dependent on the architecture and configuration file
* // settings) without breaking the strict data hiding policy by exposing the
* // real event group internals. This StaticEventGroup_t variable is passed
* // into the xSemaphoreCreateEventGroupStatic() function and is used to store
* // the event group's data structures
* StaticEventGroup_t xEventGroupBuffer;
*
* // Create the event group without dynamically allocating any memory.
* xEventGroup = xEventGroupCreateStatic( &xEventGroupBuffer );
* @endcode
*/
#if ( configSUPPORT_STATIC_ALLOCATION == 1 )
EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t * pxEventGroupBuffer ) PRIVILEGED_FUNCTION;
#endif
/**
* event_groups.h
* @code{c}
* EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup,
* const EventBits_t uxBitsToWaitFor,
* const BaseType_t xClearOnExit,
* const BaseType_t xWaitForAllBits,
* const TickType_t xTicksToWait );
* @endcode
*
* [Potentially] block to wait for one or more bits to be set within a
* previously created event group.
*
* This function cannot be called from an interrupt.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupWaitBits()
* to be available.
*
* @param xEventGroup The event group in which the bits are being tested. The
* event group must have previously been created using a call to
* xEventGroupCreate().
*
* @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test
* inside the event group. For example, to wait for bit 0 and/or bit 2 set
* uxBitsToWaitFor to 0x05. To wait for bits 0 and/or bit 1 and/or bit 2 set
* uxBitsToWaitFor to 0x07. Etc.
*
* @param xClearOnExit If xClearOnExit is set to pdTRUE then any bits within
* uxBitsToWaitFor that are set within the event group will be cleared before
* xEventGroupWaitBits() returns if the wait condition was met (if the function
* returns for a reason other than a timeout). If xClearOnExit is set to
* pdFALSE then the bits set in the event group are not altered when the call to
* xEventGroupWaitBits() returns.
*
* @param xWaitForAllBits If xWaitForAllBits is set to pdTRUE then
* xEventGroupWaitBits() will return when either all the bits in uxBitsToWaitFor
* are set or the specified block time expires. If xWaitForAllBits is set to
* pdFALSE then xEventGroupWaitBits() will return when any one of the bits set
* in uxBitsToWaitFor is set or the specified block time expires. The block
* time is specified by the xTicksToWait parameter.
*
* @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait
* for one/all (depending on the xWaitForAllBits value) of the bits specified by
* uxBitsToWaitFor to become set. A value of portMAX_DELAY can be used to block
* indefinitely (provided INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h).
*
* @return The value of the event group at the time either the bits being waited
* for became set, or the block time expired. Test the return value to know
* which bits were set. If xEventGroupWaitBits() returned because its timeout
* expired then not all the bits being waited for will be set. If
* xEventGroupWaitBits() returned because the bits it was waiting for were set
* then the returned value is the event group value before any bits were
* automatically cleared in the case that xClearOnExit parameter was set to
* pdTRUE.
*
* Example usage:
* @code{c}
* #define BIT_0 ( 1 << 0 )
* #define BIT_4 ( 1 << 4 )
*
* void aFunction( EventGroupHandle_t xEventGroup )
* {
* EventBits_t uxBits;
* const TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
*
* // Wait a maximum of 100ms for either bit 0 or bit 4 to be set within
* // the event group. Clear the bits before exiting.
* uxBits = xEventGroupWaitBits(
* xEventGroup, // The event group being tested.
* BIT_0 | BIT_4, // The bits within the event group to wait for.
* pdTRUE, // BIT_0 and BIT_4 should be cleared before returning.
* pdFALSE, // Don't wait for both bits, either bit will do.
* xTicksToWait ); // Wait a maximum of 100ms for either bit to be set.
*
* if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
* {
* // xEventGroupWaitBits() returned because both bits were set.
* }
* else if( ( uxBits & BIT_0 ) != 0 )
* {
* // xEventGroupWaitBits() returned because just BIT_0 was set.
* }
* else if( ( uxBits & BIT_4 ) != 0 )
* {
* // xEventGroupWaitBits() returned because just BIT_4 was set.
* }
* else
* {
* // xEventGroupWaitBits() returned because xTicksToWait ticks passed
* // without either BIT_0 or BIT_4 becoming set.
* }
* }
* @endcode
* \defgroup xEventGroupWaitBits xEventGroupWaitBits
* \ingroup EventGroup
*/
EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToWaitFor,
const BaseType_t xClearOnExit,
const BaseType_t xWaitForAllBits,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/**
* event_groups.h
* @code{c}
* EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear );
* @endcode
*
* Clear bits within an event group. This function cannot be called from an
* interrupt.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupClearBits()
* to be available.
*
* @param xEventGroup The event group in which the bits are to be cleared.
*
* @param uxBitsToClear A bitwise value that indicates the bit or bits to clear
* in the event group. For example, to clear bit 3 only, set uxBitsToClear to
* 0x08. To clear bit 3 and bit 0 set uxBitsToClear to 0x09.
*
* @return The value of the event group before the specified bits were cleared.
*
* Example usage:
* @code{c}
* #define BIT_0 ( 1 << 0 )
* #define BIT_4 ( 1 << 4 )
*
* void aFunction( EventGroupHandle_t xEventGroup )
* {
* EventBits_t uxBits;
*
* // Clear bit 0 and bit 4 in xEventGroup.
* uxBits = xEventGroupClearBits(
* xEventGroup, // The event group being updated.
* BIT_0 | BIT_4 );// The bits being cleared.
*
* if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
* {
* // Both bit 0 and bit 4 were set before xEventGroupClearBits() was
* // called. Both will now be clear (not set).
* }
* else if( ( uxBits & BIT_0 ) != 0 )
* {
* // Bit 0 was set before xEventGroupClearBits() was called. It will
* // now be clear.
* }
* else if( ( uxBits & BIT_4 ) != 0 )
* {
* // Bit 4 was set before xEventGroupClearBits() was called. It will
* // now be clear.
* }
* else
* {
* // Neither bit 0 nor bit 4 were set in the first place.
* }
* }
* @endcode
* \defgroup xEventGroupClearBits xEventGroupClearBits
* \ingroup EventGroup
*/
EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION;
/**
* event_groups.h
* @code{c}
* BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
* @endcode
*
* A version of xEventGroupClearBits() that can be called from an interrupt.
*
* Setting bits in an event group is not a deterministic operation because there
* are an unknown number of tasks that may be waiting for the bit or bits being
* set. FreeRTOS does not allow nondeterministic operations to be performed
* while interrupts are disabled, so protects event groups that are accessed
* from tasks by suspending the scheduler rather than disabling interrupts. As
* a result event groups cannot be accessed directly from an interrupt service
* routine. Therefore xEventGroupClearBitsFromISR() sends a message to the
* timer task to have the clear operation performed in the context of the timer
* task.
*
* @note If this function returns pdPASS then the timer task is ready to run
* and a portYIELD_FROM_ISR(pdTRUE) should be executed to perform the needed
* clear on the event group. This behavior is different from
* xEventGroupSetBitsFromISR because the parameter xHigherPriorityTaskWoken is
* not present.
*
* @param xEventGroup The event group in which the bits are to be cleared.
*
* @param uxBitsToClear A bitwise value that indicates the bit or bits to clear.
* For example, to clear bit 3 only, set uxBitsToClear to 0x08. To clear bit 3
* and bit 0 set uxBitsToClear to 0x09.
*
* @return If the request to execute the function was posted successfully then
* pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned
* if the timer service queue was full.
*
* Example usage:
* @code{c}
* #define BIT_0 ( 1 << 0 )
* #define BIT_4 ( 1 << 4 )
*
* // An event group which it is assumed has already been created by a call to
* // xEventGroupCreate().
* EventGroupHandle_t xEventGroup;
*
* void anInterruptHandler( void )
* {
* // Clear bit 0 and bit 4 in xEventGroup.
* xResult = xEventGroupClearBitsFromISR(
* xEventGroup, // The event group being updated.
* BIT_0 | BIT_4 ); // The bits being set.
*
* if( xResult == pdPASS )
* {
* // The message was posted successfully.
* portYIELD_FROM_ISR(pdTRUE);
* }
* }
* @endcode
* \defgroup xEventGroupClearBitsFromISR xEventGroupClearBitsFromISR
* \ingroup EventGroup
*/
#if ( configUSE_TRACE_FACILITY == 1 )
BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION;
#else
#define xEventGroupClearBitsFromISR( xEventGroup, uxBitsToClear ) \
xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) ( xEventGroup ), ( uint32_t ) ( uxBitsToClear ), NULL )
#endif
/**
* event_groups.h
* @code{c}
* EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
* @endcode
*
* Set bits within an event group.
* This function cannot be called from an interrupt. xEventGroupSetBitsFromISR()
* is a version that can be called from an interrupt.
*
* Setting bits in an event group will automatically unblock tasks that are
* blocked waiting for the bits.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupSetBits()
* to be available.
*
* @param xEventGroup The event group in which the bits are to be set.
*
* @param uxBitsToSet A bitwise value that indicates the bit or bits to set.
* For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3
* and bit 0 set uxBitsToSet to 0x09.
*
* @return The value of the event group at the time the call to
* xEventGroupSetBits() returns. There are two reasons why the returned value
* might have the bits specified by the uxBitsToSet parameter cleared. First,
* if setting a bit results in a task that was waiting for the bit leaving the
* blocked state then it is possible the bit will be cleared automatically
* (see the xClearBitOnExit parameter of xEventGroupWaitBits()). Second, any
* unblocked (or otherwise Ready state) task that has a priority above that of
* the task that called xEventGroupSetBits() will execute and may change the
* event group value before the call to xEventGroupSetBits() returns.
*
* Example usage:
* @code{c}
* #define BIT_0 ( 1 << 0 )
* #define BIT_4 ( 1 << 4 )
*
* void aFunction( EventGroupHandle_t xEventGroup )
* {
* EventBits_t uxBits;
*
* // Set bit 0 and bit 4 in xEventGroup.
* uxBits = xEventGroupSetBits(
* xEventGroup, // The event group being updated.
* BIT_0 | BIT_4 );// The bits being set.
*
* if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
* {
* // Both bit 0 and bit 4 remained set when the function returned.
* }
* else if( ( uxBits & BIT_0 ) != 0 )
* {
* // Bit 0 remained set when the function returned, but bit 4 was
* // cleared. It might be that bit 4 was cleared automatically as a
* // task that was waiting for bit 4 was removed from the Blocked
* // state.
* }
* else if( ( uxBits & BIT_4 ) != 0 )
* {
* // Bit 4 remained set when the function returned, but bit 0 was
* // cleared. It might be that bit 0 was cleared automatically as a
* // task that was waiting for bit 0 was removed from the Blocked
* // state.
* }
* else
* {
* // Neither bit 0 nor bit 4 remained set. It might be that a task
* // was waiting for both of the bits to be set, and the bits were
* // cleared as the task left the Blocked state.
* }
* }
* @endcode
* \defgroup xEventGroupSetBits xEventGroupSetBits
* \ingroup EventGroup
*/
EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION;
/**
* event_groups.h
* @code{c}
* BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken );
* @endcode
*
* A version of xEventGroupSetBits() that can be called from an interrupt.
*
* Setting bits in an event group is not a deterministic operation because there
* are an unknown number of tasks that may be waiting for the bit or bits being
* set. FreeRTOS does not allow nondeterministic operations to be performed in
* interrupts or from critical sections. Therefore xEventGroupSetBitsFromISR()
* sends a message to the timer task to have the set operation performed in the
* context of the timer task - where a scheduler lock is used in place of a
* critical section.
*
* @param xEventGroup The event group in which the bits are to be set.
*
* @param uxBitsToSet A bitwise value that indicates the bit or bits to set.
* For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3
* and bit 0 set uxBitsToSet to 0x09.
*
* @param pxHigherPriorityTaskWoken As mentioned above, calling this function
* will result in a message being sent to the timer daemon task. If the
* priority of the timer daemon task is higher than the priority of the
* currently running task (the task the interrupt interrupted) then
* *pxHigherPriorityTaskWoken will be set to pdTRUE by
* xEventGroupSetBitsFromISR(), indicating that a context switch should be
* requested before the interrupt exits. For that reason
* *pxHigherPriorityTaskWoken must be initialised to pdFALSE. See the
* example code below.
*
* @return If the request to execute the function was posted successfully then
* pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned
* if the timer service queue was full.
*
* Example usage:
* @code{c}
* #define BIT_0 ( 1 << 0 )
* #define BIT_4 ( 1 << 4 )
*
* // An event group which it is assumed has already been created by a call to
* // xEventGroupCreate().
* EventGroupHandle_t xEventGroup;
*
* void anInterruptHandler( void )
* {
* BaseType_t xHigherPriorityTaskWoken, xResult;
*
* // xHigherPriorityTaskWoken must be initialised to pdFALSE.
* xHigherPriorityTaskWoken = pdFALSE;
*
* // Set bit 0 and bit 4 in xEventGroup.
* xResult = xEventGroupSetBitsFromISR(
* xEventGroup, // The event group being updated.
* BIT_0 | BIT_4 // The bits being set.
* &xHigherPriorityTaskWoken );
*
* // Was the message posted successfully?
* if( xResult == pdPASS )
* {
* // If xHigherPriorityTaskWoken is now set to pdTRUE then a context
* // switch should be requested. The macro used is port specific and
* // will be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() -
* // refer to the documentation page for the port being used.
* portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* }
* @endcode
* \defgroup xEventGroupSetBitsFromISR xEventGroupSetBitsFromISR
* \ingroup EventGroup
*/
#if ( configUSE_TRACE_FACILITY == 1 )
BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
#else
#define xEventGroupSetBitsFromISR( xEventGroup, uxBitsToSet, pxHigherPriorityTaskWoken ) \
xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) ( xEventGroup ), ( uint32_t ) ( uxBitsToSet ), ( pxHigherPriorityTaskWoken ) )
#endif
/**
* event_groups.h
* @code{c}
* EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup,
* const EventBits_t uxBitsToSet,
* const EventBits_t uxBitsToWaitFor,
* TickType_t xTicksToWait );
* @endcode
*
* Atomically set bits within an event group, then wait for a combination of
* bits to be set within the same event group. This functionality is typically
* used to synchronise multiple tasks, where each task has to wait for the other
* tasks to reach a synchronisation point before proceeding.
*
* This function cannot be used from an interrupt.
*
* The function will return before its block time expires if the bits specified
* by the uxBitsToWait parameter are set, or become set within that time. In
* this case all the bits specified by uxBitsToWait will be automatically
* cleared before the function returns.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupSync()
* to be available.
*
* @param xEventGroup The event group in which the bits are being tested. The
* event group must have previously been created using a call to
* xEventGroupCreate().
*
* @param uxBitsToSet The bits to set in the event group before determining
* if, and possibly waiting for, all the bits specified by the uxBitsToWait
* parameter are set.
*
* @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test
* inside the event group. For example, to wait for bit 0 and bit 2 set
* uxBitsToWaitFor to 0x05. To wait for bits 0 and bit 1 and bit 2 set
* uxBitsToWaitFor to 0x07. Etc.
*
* @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait
* for all of the bits specified by uxBitsToWaitFor to become set.
*
* @return The value of the event group at the time either the bits being waited
* for became set, or the block time expired. Test the return value to know
* which bits were set. If xEventGroupSync() returned because its timeout
* expired then not all the bits being waited for will be set. If
* xEventGroupSync() returned because all the bits it was waiting for were
* set then the returned value is the event group value before any bits were
* automatically cleared.
*
* Example usage:
* @code{c}
* // Bits used by the three tasks.
* #define TASK_0_BIT ( 1 << 0 )
* #define TASK_1_BIT ( 1 << 1 )
* #define TASK_2_BIT ( 1 << 2 )
*
* #define ALL_SYNC_BITS ( TASK_0_BIT | TASK_1_BIT | TASK_2_BIT )
*
* // Use an event group to synchronise three tasks. It is assumed this event
* // group has already been created elsewhere.
* EventGroupHandle_t xEventBits;
*
* void vTask0( void *pvParameters )
* {
* EventBits_t uxReturn;
* TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
*
* for( ;; )
* {
* // Perform task functionality here.
*
* // Set bit 0 in the event flag to note this task has reached the
* // sync point. The other two tasks will set the other two bits defined
* // by ALL_SYNC_BITS. All three tasks have reached the synchronisation
* // point when all the ALL_SYNC_BITS are set. Wait a maximum of 100ms
* // for this to happen.
* uxReturn = xEventGroupSync( xEventBits, TASK_0_BIT, ALL_SYNC_BITS, xTicksToWait );
*
* if( ( uxReturn & ALL_SYNC_BITS ) == ALL_SYNC_BITS )
* {
* // All three tasks reached the synchronisation point before the call
* // to xEventGroupSync() timed out.
* }
* }
* }
*
* void vTask1( void *pvParameters )
* {
* for( ;; )
* {
* // Perform task functionality here.
*
* // Set bit 1 in the event flag to note this task has reached the
* // synchronisation point. The other two tasks will set the other two
* // bits defined by ALL_SYNC_BITS. All three tasks have reached the
* // synchronisation point when all the ALL_SYNC_BITS are set. Wait
* // indefinitely for this to happen.
* xEventGroupSync( xEventBits, TASK_1_BIT, ALL_SYNC_BITS, portMAX_DELAY );
*
* // xEventGroupSync() was called with an indefinite block time, so
* // this task will only reach here if the synchronisation was made by all
* // three tasks, so there is no need to test the return value.
* }
* }
*
* void vTask2( void *pvParameters )
* {
* for( ;; )
* {
* // Perform task functionality here.
*
* // Set bit 2 in the event flag to note this task has reached the
* // synchronisation point. The other two tasks will set the other two
* // bits defined by ALL_SYNC_BITS. All three tasks have reached the
* // synchronisation point when all the ALL_SYNC_BITS are set. Wait
* // indefinitely for this to happen.
* xEventGroupSync( xEventBits, TASK_2_BIT, ALL_SYNC_BITS, portMAX_DELAY );
*
* // xEventGroupSync() was called with an indefinite block time, so
* // this task will only reach here if the synchronisation was made by all
* // three tasks, so there is no need to test the return value.
* }
* }
*
* @endcode
* \defgroup xEventGroupSync xEventGroupSync
* \ingroup EventGroup
*/
EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
const EventBits_t uxBitsToWaitFor,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/**
* event_groups.h
* @code{c}
* EventBits_t xEventGroupGetBits( EventGroupHandle_t xEventGroup );
* @endcode
*
* Returns the current value of the bits in an event group. This function
* cannot be used from an interrupt.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupGetBits()
* to be available.
*
* @param xEventGroup The event group being queried.
*
* @return The event group bits at the time xEventGroupGetBits() was called.
*
* \defgroup xEventGroupGetBits xEventGroupGetBits
* \ingroup EventGroup
*/
#define xEventGroupGetBits( xEventGroup ) xEventGroupClearBits( ( xEventGroup ), 0 )
/**
* event_groups.h
* @code{c}
* EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup );
* @endcode
*
* A version of xEventGroupGetBits() that can be called from an ISR.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupGetBitsFromISR()
* to be available.
*
* @param xEventGroup The event group being queried.
*
* @return The event group bits at the time xEventGroupGetBitsFromISR() was called.
*
* \defgroup xEventGroupGetBitsFromISR xEventGroupGetBitsFromISR
* \ingroup EventGroup
*/
EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
/**
* event_groups.h
* @code{c}
* void xEventGroupDelete( EventGroupHandle_t xEventGroup );
* @endcode
*
* Delete an event group that was previously created by a call to
* xEventGroupCreate(). Tasks that are blocked on the event group will be
* unblocked and obtain 0 as the event group's value.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for vEventGroupDelete()
* to be available.
*
* @param xEventGroup The event group being deleted.
*/
void vEventGroupDelete( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
/**
* event_groups.h
* @code{c}
* BaseType_t xEventGroupGetStaticBuffer( EventGroupHandle_t xEventGroup,
* StaticEventGroup_t ** ppxEventGroupBuffer );
* @endcode
*
* Retrieve a pointer to a statically created event groups's data structure
* buffer. It is the same buffer that is supplied at the time of creation.
*
* The configUSE_EVENT_GROUPS configuration constant must be set to 1 for xEventGroupGetStaticBuffer()
* to be available.
*
* @param xEventGroup The event group for which to retrieve the buffer.
*
* @param ppxEventGroupBuffer Used to return a pointer to the event groups's
* data structure buffer.
*
* @return pdTRUE if the buffer was retrieved, pdFALSE otherwise.
*/
#if ( configSUPPORT_STATIC_ALLOCATION == 1 )
BaseType_t xEventGroupGetStaticBuffer( EventGroupHandle_t xEventGroup,
StaticEventGroup_t ** ppxEventGroupBuffer ) PRIVILEGED_FUNCTION;
#endif /* configSUPPORT_STATIC_ALLOCATION */
/* For internal use only. */
void vEventGroupSetBitsCallback( void * pvEventGroup,
uint32_t ulBitsToSet ) PRIVILEGED_FUNCTION;
void vEventGroupClearBitsCallback( void * pvEventGroup,
uint32_t ulBitsToClear ) PRIVILEGED_FUNCTION;
#if ( configUSE_TRACE_FACILITY == 1 )
UBaseType_t uxEventGroupGetNumber( void * xEventGroup ) PRIVILEGED_FUNCTION;
void vEventGroupSetNumber( void * xEventGroup,
UBaseType_t uxEventGroupNumber ) PRIVILEGED_FUNCTION;
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* EVENT_GROUPS_H */

511
freertos/include/list.h Normal file
View File

@ -0,0 +1,511 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/*
* This is the list implementation used by the scheduler. While it is tailored
* heavily for the schedulers needs, it is also available for use by
* application code.
*
* list_ts can only store pointers to list_item_ts. Each ListItem_t contains a
* numeric value (xItemValue). Most of the time the lists are sorted in
* ascending item value order.
*
* Lists are created already containing one list item. The value of this
* item is the maximum possible that can be stored, it is therefore always at
* the end of the list and acts as a marker. The list member pxHead always
* points to this marker - even though it is at the tail of the list. This
* is because the tail contains a wrap back pointer to the true head of
* the list.
*
* In addition to it's value, each list item contains a pointer to the next
* item in the list (pxNext), a pointer to the list it is in (pxContainer)
* and a pointer to back to the object that contains it. These later two
* pointers are included for efficiency of list manipulation. There is
* effectively a two way link between the object containing the list item and
* the list item itself.
*
*
* \page ListIntroduction List Implementation
* \ingroup FreeRTOSIntro
*/
#ifndef LIST_H
#define LIST_H
#ifndef INC_FREERTOS_H
#error "FreeRTOS.h must be included before list.h"
#endif
/*
* The list structure members are modified from within interrupts, and therefore
* by rights should be declared volatile. However, they are only modified in a
* functionally atomic way (within critical sections of with the scheduler
* suspended) and are either passed by reference into a function or indexed via
* a volatile variable. Therefore, in all use cases tested so far, the volatile
* qualifier can be omitted in order to provide a moderate performance
* improvement without adversely affecting functional behaviour. The assembly
* instructions generated by the IAR, ARM and GCC compilers when the respective
* compiler's options were set for maximum optimisation has been inspected and
* deemed to be as intended. That said, as compiler technology advances, and
* especially if aggressive cross module optimisation is used (a use case that
* has not been exercised to any great extend) then it is feasible that the
* volatile qualifier will be needed for correct optimisation. It is expected
* that a compiler removing essential code because, without the volatile
* qualifier on the list structure members and with aggressive cross module
* optimisation, the compiler deemed the code unnecessary will result in
* complete and obvious failure of the scheduler. If this is ever experienced
* then the volatile qualifier can be inserted in the relevant places within the
* list structures by simply defining configLIST_VOLATILE to volatile in
* FreeRTOSConfig.h (as per the example at the bottom of this comment block).
* If configLIST_VOLATILE is not defined then the preprocessor directives below
* will simply #define configLIST_VOLATILE away completely.
*
* To use volatile list structure members then add the following line to
* FreeRTOSConfig.h (without the quotes):
* "#define configLIST_VOLATILE volatile"
*/
#ifndef configLIST_VOLATILE
#define configLIST_VOLATILE
#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/* Macros that can be used to place known values within the list structures,
* then check that the known values do not get corrupted during the execution of
* the application. These may catch the list data structures being overwritten in
* memory. They will not catch data errors caused by incorrect configuration or
* use of FreeRTOS.*/
#if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 )
/* Define the macros to do nothing. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList )
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList )
#define listTEST_LIST_ITEM_INTEGRITY( pxItem )
#define listTEST_LIST_INTEGRITY( pxList )
#else /* if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 ) */
/* Define macros that add new members into the list structures. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1;
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2;
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1;
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2;
/* Define macros that set the new structure members to known values. */
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
/* Define macros that will assert if one of the structure members does not
* contain its expected value. */
#define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */
/*
* Definition of the only type of object that a list can contain.
*/
struct xLIST;
struct xLIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /**< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue; /**< The value being listed. In most cases this is used to sort the list in ascending order. */
struct xLIST_ITEM * configLIST_VOLATILE pxNext; /**< Pointer to the next ListItem_t in the list. */
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /**< Pointer to the previous ListItem_t in the list. */
void * pvOwner; /**< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
struct xLIST * configLIST_VOLATILE pxContainer; /**< Pointer to the list in which this list item is placed (if any). */
listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /**< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
};
typedef struct xLIST_ITEM ListItem_t;
#if ( configUSE_MINI_LIST_ITEM == 1 )
struct xMINI_LIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /**< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue;
struct xLIST_ITEM * configLIST_VOLATILE pxNext;
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious;
};
typedef struct xMINI_LIST_ITEM MiniListItem_t;
#else
typedef struct xLIST_ITEM MiniListItem_t;
#endif
/*
* Definition of the type of queue used by the scheduler.
*/
typedef struct xLIST
{
listFIRST_LIST_INTEGRITY_CHECK_VALUE /**< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE UBaseType_t uxNumberOfItems;
ListItem_t * configLIST_VOLATILE pxIndex; /**< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
MiniListItem_t xListEnd; /**< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
listSECOND_LIST_INTEGRITY_CHECK_VALUE /**< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
} List_t;
/*
* Access macro to set the owner of a list item. The owner of a list item
* is the object (usually a TCB) that contains the list item.
*
* \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
* \ingroup LinkedList
*/
#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) )
/*
* Access macro to get the owner of a list item. The owner of a list item
* is the object (usually a TCB) that contains the list item.
*
* \page listGET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
* \ingroup LinkedList
*/
#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner )
/*
* Access macro to set the value of the list item. In most cases the value is
* used to sort the list in ascending order.
*
* \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) )
/*
* Access macro to retrieve the value of the list item. The value can
* represent anything - for example the priority of a task, or the time at
* which a task should be unblocked.
*
* \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
/*
* Access macro to retrieve the value of the list item at the head of a given
* list.
*
* \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue )
/*
* Return the list item at the head of the list.
*
* \page listGET_HEAD_ENTRY listGET_HEAD_ENTRY
* \ingroup LinkedList
*/
#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext )
/*
* Return the next list item.
*
* \page listGET_NEXT listGET_NEXT
* \ingroup LinkedList
*/
#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext )
/*
* Return the list item that marks the end of the list
*
* \page listGET_END_MARKER listGET_END_MARKER
* \ingroup LinkedList
*/
#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) )
/*
* Access macro to determine if a list contains any items. The macro will
* only have the value true if the list is empty.
*
* \page listLIST_IS_EMPTY listLIST_IS_EMPTY
* \ingroup LinkedList
*/
#define listLIST_IS_EMPTY( pxList ) ( ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ? pdTRUE : pdFALSE )
/*
* Access macro to return the number of items in the list.
*/
#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
/*
* Access function to obtain the owner of the next entry in a list.
*
* The list member pxIndex is used to walk through a list. Calling
* listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list
* and returns that entry's pxOwner parameter. Using multiple calls to this
* function it is therefore possible to move through every item contained in
* a list.
*
* The pxOwner parameter of a list item is a pointer to the object that owns
* the list item. In the scheduler this is normally a task control block.
* The pxOwner parameter effectively creates a two way link between the list
* item and its owner.
*
* @param pxTCB pxTCB is set to the address of the owner of the next list item.
* @param pxList The list from which the next item owner is to be returned.
*
* \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY
* \ingroup LinkedList
*/
#if ( configNUMBER_OF_CORES == 1 )
#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
do { \
List_t * const pxConstList = ( pxList ); \
/* Increment the index to the next item and return the item, ensuring */ \
/* we don't return the marker used at the end of the list. */ \
( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
if( ( void * ) ( pxConstList )->pxIndex == ( void * ) &( ( pxConstList )->xListEnd ) ) \
{ \
( pxConstList )->pxIndex = ( pxConstList )->xListEnd.pxNext; \
} \
( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \
} while( 0 )
#else /* #if ( configNUMBER_OF_CORES == 1 ) */
/* This function is not required in SMP. FreeRTOS SMP scheduler doesn't use
* pxIndex and it should always point to the xListEnd. Not defining this macro
* here to prevent updating pxIndex.
*/
#endif /* #if ( configNUMBER_OF_CORES == 1 ) */
/*
* Version of uxListRemove() that does not return a value. Provided as a slight
* optimisation for xTaskIncrementTick() by being inline.
*
* Remove an item from a list. The list item has a pointer to the list that
* it is in, so only the list item need be passed into the function.
*
* @param uxListRemove The item to be removed. The item will remove itself from
* the list pointed to by it's pxContainer parameter.
*
* @return The number of items that remain in the list after the list item has
* been removed.
*
* \page listREMOVE_ITEM listREMOVE_ITEM
* \ingroup LinkedList
*/
#define listREMOVE_ITEM( pxItemToRemove ) \
do { \
/* The list item knows which list it is in. Obtain the list from the list \
* item. */ \
List_t * const pxList = ( pxItemToRemove )->pxContainer; \
\
( pxItemToRemove )->pxNext->pxPrevious = ( pxItemToRemove )->pxPrevious; \
( pxItemToRemove )->pxPrevious->pxNext = ( pxItemToRemove )->pxNext; \
/* Make sure the index is left pointing to a valid item. */ \
if( pxList->pxIndex == ( pxItemToRemove ) ) \
{ \
pxList->pxIndex = ( pxItemToRemove )->pxPrevious; \
} \
\
( pxItemToRemove )->pxContainer = NULL; \
( ( pxList )->uxNumberOfItems ) = ( UBaseType_t ) ( ( ( pxList )->uxNumberOfItems ) - 1U ); \
} while( 0 )
/*
* Inline version of vListInsertEnd() to provide slight optimisation for
* xTaskIncrementTick().
*
* Insert a list item into a list. The item will be inserted in a position
* such that it will be the last item within the list returned by multiple
* calls to listGET_OWNER_OF_NEXT_ENTRY.
*
* The list member pxIndex is used to walk through a list. Calling
* listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list.
* Placing an item in a list using vListInsertEnd effectively places the item
* in the list position pointed to by pxIndex. This means that every other
* item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before
* the pxIndex parameter again points to the item being inserted.
*
* @param pxList The list into which the item is to be inserted.
*
* @param pxNewListItem The list item to be inserted into the list.
*
* \page listINSERT_END listINSERT_END
* \ingroup LinkedList
*/
#define listINSERT_END( pxList, pxNewListItem ) \
do { \
ListItem_t * const pxIndex = ( pxList )->pxIndex; \
\
/* Only effective when configASSERT() is also defined, these tests may catch \
* the list data structures being overwritten in memory. They will not catch \
* data errors caused by incorrect configuration or use of FreeRTOS. */ \
listTEST_LIST_INTEGRITY( ( pxList ) ); \
listTEST_LIST_ITEM_INTEGRITY( ( pxNewListItem ) ); \
\
/* Insert a new list item into ( pxList ), but rather than sort the list, \
* makes the new list item the last item to be removed by a call to \
* listGET_OWNER_OF_NEXT_ENTRY(). */ \
( pxNewListItem )->pxNext = pxIndex; \
( pxNewListItem )->pxPrevious = pxIndex->pxPrevious; \
\
pxIndex->pxPrevious->pxNext = ( pxNewListItem ); \
pxIndex->pxPrevious = ( pxNewListItem ); \
\
/* Remember which list the item is in. */ \
( pxNewListItem )->pxContainer = ( pxList ); \
\
( ( pxList )->uxNumberOfItems ) = ( UBaseType_t ) ( ( ( pxList )->uxNumberOfItems ) + 1U ); \
} while( 0 )
/*
* Access function to obtain the owner of the first entry in a list. Lists
* are normally sorted in ascending item value order.
*
* This function returns the pxOwner member of the first item in the list.
* The pxOwner parameter of a list item is a pointer to the object that owns
* the list item. In the scheduler this is normally a task control block.
* The pxOwner parameter effectively creates a two way link between the list
* item and its owner.
*
* @param pxList The list from which the owner of the head item is to be
* returned.
*
* \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY
* \ingroup LinkedList
*/
#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( ( &( ( pxList )->xListEnd ) )->pxNext->pvOwner )
/*
* Check to see if a list item is within a list. The list item maintains a
* "container" pointer that points to the list it is in. All this macro does
* is check to see if the container and the list match.
*
* @param pxList The list we want to know if the list item is within.
* @param pxListItem The list item we want to know if is in the list.
* @return pdTRUE if the list item is in the list, otherwise pdFALSE.
*/
#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( ( pxListItem )->pxContainer == ( pxList ) ) ? ( pdTRUE ) : ( pdFALSE ) )
/*
* Return the list a list item is contained within (referenced from).
*
* @param pxListItem The list item being queried.
* @return A pointer to the List_t object that references the pxListItem
*/
#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pxContainer )
/*
* This provides a crude means of knowing if a list has been initialised, as
* pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise()
* function.
*/
#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )
/*
* Must be called before a list is used! This initialises all the members
* of the list structure and inserts the xListEnd item into the list as a
* marker to the back of the list.
*
* @param pxList Pointer to the list being initialised.
*
* \page vListInitialise vListInitialise
* \ingroup LinkedList
*/
void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION;
/*
* Must be called before a list item is used. This sets the list container to
* null so the item does not think that it is already contained in a list.
*
* @param pxItem Pointer to the list item being initialised.
*
* \page vListInitialiseItem vListInitialiseItem
* \ingroup LinkedList
*/
void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION;
/*
* Insert a list item into a list. The item will be inserted into the list in
* a position determined by its item value (ascending item value order).
*
* @param pxList The list into which the item is to be inserted.
*
* @param pxNewListItem The item that is to be placed in the list.
*
* \page vListInsert vListInsert
* \ingroup LinkedList
*/
void vListInsert( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
/*
* Insert a list item into a list. The item will be inserted in a position
* such that it will be the last item within the list returned by multiple
* calls to listGET_OWNER_OF_NEXT_ENTRY.
*
* The list member pxIndex is used to walk through a list. Calling
* listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list.
* Placing an item in a list using vListInsertEnd effectively places the item
* in the list position pointed to by pxIndex. This means that every other
* item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before
* the pxIndex parameter again points to the item being inserted.
*
* @param pxList The list into which the item is to be inserted.
*
* @param pxNewListItem The list item to be inserted into the list.
*
* \page vListInsertEnd vListInsertEnd
* \ingroup LinkedList
*/
void vListInsertEnd( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
/*
* Remove an item from a list. The list item has a pointer to the list that
* it is in, so only the list item need be passed into the function.
*
* @param uxListRemove The item to be removed. The item will remove itself from
* the list pointed to by it's pxContainer parameter.
*
* @return The number of items that remain in the list after the list item has
* been removed.
*
* \page uxListRemove uxListRemove
* \ingroup LinkedList
*/
UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION;
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* ifndef LIST_H */

967
freertos/include/message_buffer.h Normal file
View File

@ -0,0 +1,967 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/*
* Message buffers build functionality on top of FreeRTOS stream buffers.
* Whereas stream buffers are used to send a continuous stream of data from one
* task or interrupt to another, message buffers are used to send variable
* length discrete messages from one task or interrupt to another. Their
* implementation is light weight, making them particularly suited for interrupt
* to task and core to core communication scenarios.
*
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer
* implementation (so also the message buffer implementation, as message buffers
* are built on top of stream buffers) assumes there is only one task or
* interrupt that will write to the buffer (the writer), and only one task or
* interrupt that will read from the buffer (the reader). It is safe for the
* writer and reader to be different tasks or interrupts, but, unlike other
* FreeRTOS objects, it is not safe to have multiple different writers or
* multiple different readers. If there are to be multiple different writers
* then the application writer must place each call to a writing API function
* (such as xMessageBufferSend()) inside a critical section and set the send
* block time to 0. Likewise, if there are to be multiple different readers
* then the application writer must place each call to a reading API function
* (such as xMessageBufferRead()) inside a critical section and set the receive
* timeout to 0.
*
* Message buffers hold variable length messages. To enable that, when a
* message is written to the message buffer an additional sizeof( size_t ) bytes
* are also written to store the message's length (that happens internally, with
* the API function). sizeof( size_t ) is typically 4 bytes on a 32-bit
* architecture, so writing a 10 byte message to a message buffer on a 32-bit
* architecture will actually reduce the available space in the message buffer
* by 14 bytes (10 byte are used by the message, and 4 bytes to hold the length
* of the message).
*/
#ifndef FREERTOS_MESSAGE_BUFFER_H
#define FREERTOS_MESSAGE_BUFFER_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include message_buffer.h"
#endif
/* Message buffers are built onto of stream buffers. */
#include "stream_buffer.h"
/* *INDENT-OFF* */
#if defined( __cplusplus )
extern "C" {
#endif
/* *INDENT-ON* */
/**
* Type by which message buffers are referenced. For example, a call to
* xMessageBufferCreate() returns an MessageBufferHandle_t variable that can
* then be used as a parameter to xMessageBufferSend(), xMessageBufferReceive(),
* etc. Message buffer is essentially built as a stream buffer hence its handle
* is also set to same type as a stream buffer handle.
*/
typedef StreamBufferHandle_t MessageBufferHandle_t;
/*-----------------------------------------------------------*/
/**
* message_buffer.h
*
* @code{c}
* MessageBufferHandle_t xMessageBufferCreate( size_t xBufferSizeBytes );
* @endcode
*
* Creates a new message buffer using dynamically allocated memory. See
* xMessageBufferCreateStatic() for a version that uses statically allocated
* memory (memory that is allocated at compile time).
*
* configSUPPORT_DYNAMIC_ALLOCATION must be set to 1 or left undefined in
* FreeRTOSConfig.h for xMessageBufferCreate() to be available.
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferCreate() to be available.
*
* @param xBufferSizeBytes The total number of bytes (not messages) the message
* buffer will be able to hold at any one time. When a message is written to
* the message buffer an additional sizeof( size_t ) bytes are also written to
* store the message's length. sizeof( size_t ) is typically 4 bytes on a
* 32-bit architecture, so on most 32-bit architectures a 10 byte message will
* take up 14 bytes of message buffer space.
*
* @param pxSendCompletedCallback Callback invoked when a send operation to the
* message buffer is complete. If the parameter is NULL or xMessageBufferCreate()
* is called without the parameter, then it will use the default implementation
* provided by sbSEND_COMPLETED macro. To enable the callback,
* configUSE_SB_COMPLETED_CALLBACK must be set to 1 in FreeRTOSConfig.h.
*
* @param pxReceiveCompletedCallback Callback invoked when a receive operation from
* the message buffer is complete. If the parameter is NULL or xMessageBufferCreate()
* is called without the parameter, it will use the default implementation provided
* by sbRECEIVE_COMPLETED macro. To enable the callback,
* configUSE_SB_COMPLETED_CALLBACK must be set to 1 in FreeRTOSConfig.h.
*
* @return If NULL is returned, then the message buffer cannot be created
* because there is insufficient heap memory available for FreeRTOS to allocate
* the message buffer data structures and storage area. A non-NULL value being
* returned indicates that the message buffer has been created successfully -
* the returned value should be stored as the handle to the created message
* buffer.
*
* Example use:
* @code{c}
*
* void vAFunction( void )
* {
* MessageBufferHandle_t xMessageBuffer;
* const size_t xMessageBufferSizeBytes = 100;
*
* // Create a message buffer that can hold 100 bytes. The memory used to hold
* // both the message buffer structure and the messages themselves is allocated
* // dynamically. Each message added to the buffer consumes an additional 4
* // bytes which are used to hold the length of the message.
* xMessageBuffer = xMessageBufferCreate( xMessageBufferSizeBytes );
*
* if( xMessageBuffer == NULL )
* {
* // There was not enough heap memory space available to create the
* // message buffer.
* }
* else
* {
* // The message buffer was created successfully and can now be used.
* }
*
* @endcode
* \defgroup xMessageBufferCreate xMessageBufferCreate
* \ingroup MessageBufferManagement
*/
#define xMessageBufferCreate( xBufferSizeBytes ) \
xStreamBufferGenericCreate( ( xBufferSizeBytes ), ( size_t ) 0, sbTYPE_MESSAGE_BUFFER, NULL, NULL )
#if ( configUSE_SB_COMPLETED_CALLBACK == 1 )
#define xMessageBufferCreateWithCallback( xBufferSizeBytes, pxSendCompletedCallback, pxReceiveCompletedCallback ) \
xStreamBufferGenericCreate( ( xBufferSizeBytes ), ( size_t ) 0, sbTYPE_MESSAGE_BUFFER, ( pxSendCompletedCallback ), ( pxReceiveCompletedCallback ) )
#endif
/**
* message_buffer.h
*
* @code{c}
* MessageBufferHandle_t xMessageBufferCreateStatic( size_t xBufferSizeBytes,
* uint8_t *pucMessageBufferStorageArea,
* StaticMessageBuffer_t *pxStaticMessageBuffer );
* @endcode
* Creates a new message buffer using statically allocated memory. See
* xMessageBufferCreate() for a version that uses dynamically allocated memory.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferCreateStatic() to be available.
*
* @param xBufferSizeBytes The size, in bytes, of the buffer pointed to by the
* pucMessageBufferStorageArea parameter. When a message is written to the
* message buffer an additional sizeof( size_t ) bytes are also written to store
* the message's length. sizeof( size_t ) is typically 4 bytes on a 32-bit
* architecture, so on most 32-bit architecture a 10 byte message will take up
* 14 bytes of message buffer space. The maximum number of bytes that can be
* stored in the message buffer is actually (xBufferSizeBytes - 1).
*
* @param pucMessageBufferStorageArea Must point to a uint8_t array that is at
* least xBufferSizeBytes big. This is the array to which messages are
* copied when they are written to the message buffer.
*
* @param pxStaticMessageBuffer Must point to a variable of type
* StaticMessageBuffer_t, which will be used to hold the message buffer's data
* structure.
*
* @param pxSendCompletedCallback Callback invoked when a new message is sent to the message buffer.
* If the parameter is NULL or xMessageBufferCreate() is called without the parameter, then it will use the default
* implementation provided by sbSEND_COMPLETED macro. To enable the callback,
* configUSE_SB_COMPLETED_CALLBACK must be set to 1 in FreeRTOSConfig.h.
*
* @param pxReceiveCompletedCallback Callback invoked when a message is read from a
* message buffer. If the parameter is NULL or xMessageBufferCreate() is called without the parameter, it will
* use the default implementation provided by sbRECEIVE_COMPLETED macro. To enable the callback,
* configUSE_SB_COMPLETED_CALLBACK must be set to 1 in FreeRTOSConfig.h.
*
* @return If the message buffer is created successfully then a handle to the
* created message buffer is returned. If either pucMessageBufferStorageArea or
* pxStaticmessageBuffer are NULL then NULL is returned.
*
* Example use:
* @code{c}
*
* // Used to dimension the array used to hold the messages. The available space
* // will actually be one less than this, so 999.
#define STORAGE_SIZE_BYTES 1000
*
* // Defines the memory that will actually hold the messages within the message
* // buffer.
* static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
*
* // The variable used to hold the message buffer structure.
* StaticMessageBuffer_t xMessageBufferStruct;
*
* void MyFunction( void )
* {
* MessageBufferHandle_t xMessageBuffer;
*
* xMessageBuffer = xMessageBufferCreateStatic( sizeof( ucStorageBuffer ),
* ucStorageBuffer,
* &xMessageBufferStruct );
*
* // As neither the pucMessageBufferStorageArea or pxStaticMessageBuffer
* // parameters were NULL, xMessageBuffer will not be NULL, and can be used to
* // reference the created message buffer in other message buffer API calls.
*
* // Other code that uses the message buffer can go here.
* }
*
* @endcode
* \defgroup xMessageBufferCreateStatic xMessageBufferCreateStatic
* \ingroup MessageBufferManagement
*/
#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) \
xStreamBufferGenericCreateStatic( ( xBufferSizeBytes ), 0, sbTYPE_MESSAGE_BUFFER, ( pucMessageBufferStorageArea ), ( pxStaticMessageBuffer ), NULL, NULL )
#if ( configUSE_SB_COMPLETED_CALLBACK == 1 )
#define xMessageBufferCreateStaticWithCallback( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer, pxSendCompletedCallback, pxReceiveCompletedCallback ) \
xStreamBufferGenericCreateStatic( ( xBufferSizeBytes ), 0, sbTYPE_MESSAGE_BUFFER, ( pucMessageBufferStorageArea ), ( pxStaticMessageBuffer ), ( pxSendCompletedCallback ), ( pxReceiveCompletedCallback ) )
#endif
/**
* message_buffer.h
*
* @code{c}
* BaseType_t xMessageBufferGetStaticBuffers( MessageBufferHandle_t xMessageBuffer,
* uint8_t ** ppucMessageBufferStorageArea,
* StaticMessageBuffer_t ** ppxStaticMessageBuffer );
* @endcode
*
* Retrieve pointers to a statically created message buffer's data structure
* buffer and storage area buffer. These are the same buffers that are supplied
* at the time of creation.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferGetStaticBuffers() to be available.
*
* @param xMessageBuffer The message buffer for which to retrieve the buffers.
*
* @param ppucMessageBufferStorageArea Used to return a pointer to the
* message buffer's storage area buffer.
*
* @param ppxStaticMessageBuffer Used to return a pointer to the message
* buffer's data structure buffer.
*
* @return pdTRUE if buffers were retrieved, pdFALSE otherwise..
*
* \defgroup xMessageBufferGetStaticBuffers xMessageBufferGetStaticBuffers
* \ingroup MessageBufferManagement
*/
#if ( configSUPPORT_STATIC_ALLOCATION == 1 )
#define xMessageBufferGetStaticBuffers( xMessageBuffer, ppucMessageBufferStorageArea, ppxStaticMessageBuffer ) \
xStreamBufferGetStaticBuffers( ( xMessageBuffer ), ( ppucMessageBufferStorageArea ), ( ppxStaticMessageBuffer ) )
#endif /* configSUPPORT_STATIC_ALLOCATION */
/**
* message_buffer.h
*
* @code{c}
* size_t xMessageBufferSend( MessageBufferHandle_t xMessageBuffer,
* const void *pvTxData,
* size_t xDataLengthBytes,
* TickType_t xTicksToWait );
* @endcode
*
* Sends a discrete message to the message buffer. The message can be any
* length that fits within the buffer's free space, and is copied into the
* buffer.
*
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer
* implementation (so also the message buffer implementation, as message buffers
* are built on top of stream buffers) assumes there is only one task or
* interrupt that will write to the buffer (the writer), and only one task or
* interrupt that will read from the buffer (the reader). It is safe for the
* writer and reader to be different tasks or interrupts, but, unlike other
* FreeRTOS objects, it is not safe to have multiple different writers or
* multiple different readers. If there are to be multiple different writers
* then the application writer must place each call to a writing API function
* (such as xMessageBufferSend()) inside a critical section and set the send
* block time to 0. Likewise, if there are to be multiple different readers
* then the application writer must place each call to a reading API function
* (such as xMessageBufferRead()) inside a critical section and set the receive
* block time to 0.
*
* Use xMessageBufferSend() to write to a message buffer from a task. Use
* xMessageBufferSendFromISR() to write to a message buffer from an interrupt
* service routine (ISR).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferSend() to be available.
*
* @param xMessageBuffer The handle of the message buffer to which a message is
* being sent.
*
* @param pvTxData A pointer to the message that is to be copied into the
* message buffer.
*
* @param xDataLengthBytes The length of the message. That is, the number of
* bytes to copy from pvTxData into the message buffer. When a message is
* written to the message buffer an additional sizeof( size_t ) bytes are also
* written to store the message's length. sizeof( size_t ) is typically 4 bytes
* on a 32-bit architecture, so on most 32-bit architecture setting
* xDataLengthBytes to 20 will reduce the free space in the message buffer by 24
* bytes (20 bytes of message data and 4 bytes to hold the message length).
*
* @param xTicksToWait The maximum amount of time the calling task should remain
* in the Blocked state to wait for enough space to become available in the
* message buffer, should the message buffer have insufficient space when
* xMessageBufferSend() is called. The calling task will never block if
* xTicksToWait is zero. The block time is specified in tick periods, so the
* absolute time it represents is dependent on the tick frequency. The macro
* pdMS_TO_TICKS() can be used to convert a time specified in milliseconds into
* a time specified in ticks. Setting xTicksToWait to portMAX_DELAY will cause
* the task to wait indefinitely (without timing out), provided
* INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h. Tasks do not use any
* CPU time when they are in the Blocked state.
*
* @return The number of bytes written to the message buffer. If the call to
* xMessageBufferSend() times out before there was enough space to write the
* message into the message buffer then zero is returned. If the call did not
* time out then xDataLengthBytes is returned.
*
* Example use:
* @code{c}
* void vAFunction( MessageBufferHandle_t xMessageBuffer )
* {
* size_t xBytesSent;
* uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
* char *pcStringToSend = "String to send";
* const TickType_t x100ms = pdMS_TO_TICKS( 100 );
*
* // Send an array to the message buffer, blocking for a maximum of 100ms to
* // wait for enough space to be available in the message buffer.
* xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
*
* if( xBytesSent != sizeof( ucArrayToSend ) )
* {
* // The call to xMessageBufferSend() times out before there was enough
* // space in the buffer for the data to be written.
* }
*
* // Send the string to the message buffer. Return immediately if there is
* // not enough space in the buffer.
* xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
*
* if( xBytesSent != strlen( pcStringToSend ) )
* {
* // The string could not be added to the message buffer because there was
* // not enough free space in the buffer.
* }
* }
* @endcode
* \defgroup xMessageBufferSend xMessageBufferSend
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) \
xStreamBufferSend( ( xMessageBuffer ), ( pvTxData ), ( xDataLengthBytes ), ( xTicksToWait ) )
/**
* message_buffer.h
*
* @code{c}
* size_t xMessageBufferSendFromISR( MessageBufferHandle_t xMessageBuffer,
* const void *pvTxData,
* size_t xDataLengthBytes,
* BaseType_t *pxHigherPriorityTaskWoken );
* @endcode
*
* Interrupt safe version of the API function that sends a discrete message to
* the message buffer. The message can be any length that fits within the
* buffer's free space, and is copied into the buffer.
*
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer
* implementation (so also the message buffer implementation, as message buffers
* are built on top of stream buffers) assumes there is only one task or
* interrupt that will write to the buffer (the writer), and only one task or
* interrupt that will read from the buffer (the reader). It is safe for the
* writer and reader to be different tasks or interrupts, but, unlike other
* FreeRTOS objects, it is not safe to have multiple different writers or
* multiple different readers. If there are to be multiple different writers
* then the application writer must place each call to a writing API function
* (such as xMessageBufferSend()) inside a critical section and set the send
* block time to 0. Likewise, if there are to be multiple different readers
* then the application writer must place each call to a reading API function
* (such as xMessageBufferRead()) inside a critical section and set the receive
* block time to 0.
*
* Use xMessageBufferSend() to write to a message buffer from a task. Use
* xMessageBufferSendFromISR() to write to a message buffer from an interrupt
* service routine (ISR).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferSendFromISR() to be available.
*
* @param xMessageBuffer The handle of the message buffer to which a message is
* being sent.
*
* @param pvTxData A pointer to the message that is to be copied into the
* message buffer.
*
* @param xDataLengthBytes The length of the message. That is, the number of
* bytes to copy from pvTxData into the message buffer. When a message is
* written to the message buffer an additional sizeof( size_t ) bytes are also
* written to store the message's length. sizeof( size_t ) is typically 4 bytes
* on a 32-bit architecture, so on most 32-bit architecture setting
* xDataLengthBytes to 20 will reduce the free space in the message buffer by 24
* bytes (20 bytes of message data and 4 bytes to hold the message length).
*
* @param pxHigherPriorityTaskWoken It is possible that a message buffer will
* have a task blocked on it waiting for data. Calling
* xMessageBufferSendFromISR() can make data available, and so cause a task that
* was waiting for data to leave the Blocked state. If calling
* xMessageBufferSendFromISR() causes a task to leave the Blocked state, and the
* unblocked task has a priority higher than the currently executing task (the
* task that was interrupted), then, internally, xMessageBufferSendFromISR()
* will set *pxHigherPriorityTaskWoken to pdTRUE. If
* xMessageBufferSendFromISR() sets this value to pdTRUE, then normally a
* context switch should be performed before the interrupt is exited. This will
* ensure that the interrupt returns directly to the highest priority Ready
* state task. *pxHigherPriorityTaskWoken should be set to pdFALSE before it
* is passed into the function. See the code example below for an example.
*
* @return The number of bytes actually written to the message buffer. If the
* message buffer didn't have enough free space for the message to be stored
* then 0 is returned, otherwise xDataLengthBytes is returned.
*
* Example use:
* @code{c}
* // A message buffer that has already been created.
* MessageBufferHandle_t xMessageBuffer;
*
* void vAnInterruptServiceRoutine( void )
* {
* size_t xBytesSent;
* char *pcStringToSend = "String to send";
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
*
* // Attempt to send the string to the message buffer.
* xBytesSent = xMessageBufferSendFromISR( xMessageBuffer,
* ( void * ) pcStringToSend,
* strlen( pcStringToSend ),
* &xHigherPriorityTaskWoken );
*
* if( xBytesSent != strlen( pcStringToSend ) )
* {
* // The string could not be added to the message buffer because there was
* // not enough free space in the buffer.
* }
*
* // If xHigherPriorityTaskWoken was set to pdTRUE inside
* // xMessageBufferSendFromISR() then a task that has a priority above the
* // priority of the currently executing task was unblocked and a context
* // switch should be performed to ensure the ISR returns to the unblocked
* // task. In most FreeRTOS ports this is done by simply passing
* // xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
* // variables value, and perform the context switch if necessary. Check the
* // documentation for the port in use for port specific instructions.
* portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* @endcode
* \defgroup xMessageBufferSendFromISR xMessageBufferSendFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) \
xStreamBufferSendFromISR( ( xMessageBuffer ), ( pvTxData ), ( xDataLengthBytes ), ( pxHigherPriorityTaskWoken ) )
/**
* message_buffer.h
*
* @code{c}
* size_t xMessageBufferReceive( MessageBufferHandle_t xMessageBuffer,
* void *pvRxData,
* size_t xBufferLengthBytes,
* TickType_t xTicksToWait );
* @endcode
*
* Receives a discrete message from a message buffer. Messages can be of
* variable length and are copied out of the buffer.
*
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer
* implementation (so also the message buffer implementation, as message buffers
* are built on top of stream buffers) assumes there is only one task or
* interrupt that will write to the buffer (the writer), and only one task or
* interrupt that will read from the buffer (the reader). It is safe for the
* writer and reader to be different tasks or interrupts, but, unlike other
* FreeRTOS objects, it is not safe to have multiple different writers or
* multiple different readers. If there are to be multiple different writers
* then the application writer must place each call to a writing API function
* (such as xMessageBufferSend()) inside a critical section and set the send
* block time to 0. Likewise, if there are to be multiple different readers
* then the application writer must place each call to a reading API function
* (such as xMessageBufferRead()) inside a critical section and set the receive
* block time to 0.
*
* Use xMessageBufferReceive() to read from a message buffer from a task. Use
* xMessageBufferReceiveFromISR() to read from a message buffer from an
* interrupt service routine (ISR).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferReceive() to be available.
*
* @param xMessageBuffer The handle of the message buffer from which a message
* is being received.
*
* @param pvRxData A pointer to the buffer into which the received message is
* to be copied.
*
* @param xBufferLengthBytes The length of the buffer pointed to by the pvRxData
* parameter. This sets the maximum length of the message that can be received.
* If xBufferLengthBytes is too small to hold the next message then the message
* will be left in the message buffer and 0 will be returned.
*
* @param xTicksToWait The maximum amount of time the task should remain in the
* Blocked state to wait for a message, should the message buffer be empty.
* xMessageBufferReceive() will return immediately if xTicksToWait is zero and
* the message buffer is empty. The block time is specified in tick periods, so
* the absolute time it represents is dependent on the tick frequency. The
* macro pdMS_TO_TICKS() can be used to convert a time specified in milliseconds
* into a time specified in ticks. Setting xTicksToWait to portMAX_DELAY will
* cause the task to wait indefinitely (without timing out), provided
* INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h. Tasks do not use any
* CPU time when they are in the Blocked state.
*
* @return The length, in bytes, of the message read from the message buffer, if
* any. If xMessageBufferReceive() times out before a message became available
* then zero is returned. If the length of the message is greater than
* xBufferLengthBytes then the message will be left in the message buffer and
* zero is returned.
*
* Example use:
* @code{c}
* void vAFunction( MessageBuffer_t xMessageBuffer )
* {
* uint8_t ucRxData[ 20 ];
* size_t xReceivedBytes;
* const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
*
* // Receive the next message from the message buffer. Wait in the Blocked
* // state (so not using any CPU processing time) for a maximum of 100ms for
* // a message to become available.
* xReceivedBytes = xMessageBufferReceive( xMessageBuffer,
* ( void * ) ucRxData,
* sizeof( ucRxData ),
* xBlockTime );
*
* if( xReceivedBytes > 0 )
* {
* // A ucRxData contains a message that is xReceivedBytes long. Process
* // the message here....
* }
* }
* @endcode
* \defgroup xMessageBufferReceive xMessageBufferReceive
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) \
xStreamBufferReceive( ( xMessageBuffer ), ( pvRxData ), ( xBufferLengthBytes ), ( xTicksToWait ) )
/**
* message_buffer.h
*
* @code{c}
* size_t xMessageBufferReceiveFromISR( MessageBufferHandle_t xMessageBuffer,
* void *pvRxData,
* size_t xBufferLengthBytes,
* BaseType_t *pxHigherPriorityTaskWoken );
* @endcode
*
* An interrupt safe version of the API function that receives a discrete
* message from a message buffer. Messages can be of variable length and are
* copied out of the buffer.
*
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer
* implementation (so also the message buffer implementation, as message buffers
* are built on top of stream buffers) assumes there is only one task or
* interrupt that will write to the buffer (the writer), and only one task or
* interrupt that will read from the buffer (the reader). It is safe for the
* writer and reader to be different tasks or interrupts, but, unlike other
* FreeRTOS objects, it is not safe to have multiple different writers or
* multiple different readers. If there are to be multiple different writers
* then the application writer must place each call to a writing API function
* (such as xMessageBufferSend()) inside a critical section and set the send
* block time to 0. Likewise, if there are to be multiple different readers
* then the application writer must place each call to a reading API function
* (such as xMessageBufferRead()) inside a critical section and set the receive
* block time to 0.
*
* Use xMessageBufferReceive() to read from a message buffer from a task. Use
* xMessageBufferReceiveFromISR() to read from a message buffer from an
* interrupt service routine (ISR).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferReceiveFromISR() to be available.
*
* @param xMessageBuffer The handle of the message buffer from which a message
* is being received.
*
* @param pvRxData A pointer to the buffer into which the received message is
* to be copied.
*
* @param xBufferLengthBytes The length of the buffer pointed to by the pvRxData
* parameter. This sets the maximum length of the message that can be received.
* If xBufferLengthBytes is too small to hold the next message then the message
* will be left in the message buffer and 0 will be returned.
*
* @param pxHigherPriorityTaskWoken It is possible that a message buffer will
* have a task blocked on it waiting for space to become available. Calling
* xMessageBufferReceiveFromISR() can make space available, and so cause a task
* that is waiting for space to leave the Blocked state. If calling
* xMessageBufferReceiveFromISR() causes a task to leave the Blocked state, and
* the unblocked task has a priority higher than the currently executing task
* (the task that was interrupted), then, internally,
* xMessageBufferReceiveFromISR() will set *pxHigherPriorityTaskWoken to pdTRUE.
* If xMessageBufferReceiveFromISR() sets this value to pdTRUE, then normally a
* context switch should be performed before the interrupt is exited. That will
* ensure the interrupt returns directly to the highest priority Ready state
* task. *pxHigherPriorityTaskWoken should be set to pdFALSE before it is
* passed into the function. See the code example below for an example.
*
* @return The length, in bytes, of the message read from the message buffer, if
* any.
*
* Example use:
* @code{c}
* // A message buffer that has already been created.
* MessageBuffer_t xMessageBuffer;
*
* void vAnInterruptServiceRoutine( void )
* {
* uint8_t ucRxData[ 20 ];
* size_t xReceivedBytes;
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
*
* // Receive the next message from the message buffer.
* xReceivedBytes = xMessageBufferReceiveFromISR( xMessageBuffer,
* ( void * ) ucRxData,
* sizeof( ucRxData ),
* &xHigherPriorityTaskWoken );
*
* if( xReceivedBytes > 0 )
* {
* // A ucRxData contains a message that is xReceivedBytes long. Process
* // the message here....
* }
*
* // If xHigherPriorityTaskWoken was set to pdTRUE inside
* // xMessageBufferReceiveFromISR() then a task that has a priority above the
* // priority of the currently executing task was unblocked and a context
* // switch should be performed to ensure the ISR returns to the unblocked
* // task. In most FreeRTOS ports this is done by simply passing
* // xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
* // variables value, and perform the context switch if necessary. Check the
* // documentation for the port in use for port specific instructions.
* portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* @endcode
* \defgroup xMessageBufferReceiveFromISR xMessageBufferReceiveFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) \
xStreamBufferReceiveFromISR( ( xMessageBuffer ), ( pvRxData ), ( xBufferLengthBytes ), ( pxHigherPriorityTaskWoken ) )
/**
* message_buffer.h
*
* @code{c}
* void vMessageBufferDelete( MessageBufferHandle_t xMessageBuffer );
* @endcode
*
* Deletes a message buffer that was previously created using a call to
* xMessageBufferCreate() or xMessageBufferCreateStatic(). If the message
* buffer was created using dynamic memory (that is, by xMessageBufferCreate()),
* then the allocated memory is freed.
*
* A message buffer handle must not be used after the message buffer has been
* deleted.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* vMessageBufferDelete() to be available.
*
* @param xMessageBuffer The handle of the message buffer to be deleted.
*
*/
#define vMessageBufferDelete( xMessageBuffer ) \
vStreamBufferDelete( xMessageBuffer )
/**
* message_buffer.h
* @code{c}
* BaseType_t xMessageBufferIsFull( MessageBufferHandle_t xMessageBuffer );
* @endcode
*
* Tests to see if a message buffer is full. A message buffer is full if it
* cannot accept any more messages, of any size, until space is made available
* by a message being removed from the message buffer.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferIsFull() to be available.
*
* @param xMessageBuffer The handle of the message buffer being queried.
*
* @return If the message buffer referenced by xMessageBuffer is full then
* pdTRUE is returned. Otherwise pdFALSE is returned.
*/
#define xMessageBufferIsFull( xMessageBuffer ) \
xStreamBufferIsFull( xMessageBuffer )
/**
* message_buffer.h
* @code{c}
* BaseType_t xMessageBufferIsEmpty( MessageBufferHandle_t xMessageBuffer );
* @endcode
*
* Tests to see if a message buffer is empty (does not contain any messages).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferIsEmpty() to be available.
*
* @param xMessageBuffer The handle of the message buffer being queried.
*
* @return If the message buffer referenced by xMessageBuffer is empty then
* pdTRUE is returned. Otherwise pdFALSE is returned.
*
*/
#define xMessageBufferIsEmpty( xMessageBuffer ) \
xStreamBufferIsEmpty( xMessageBuffer )
/**
* message_buffer.h
* @code{c}
* BaseType_t xMessageBufferReset( MessageBufferHandle_t xMessageBuffer );
* @endcode
*
* Resets a message buffer to its initial empty state, discarding any message it
* contained.
*
* A message buffer can only be reset if there are no tasks blocked on it.
*
* Use xMessageBufferReset() to reset a message buffer from a task.
* Use xMessageBufferResetFromISR() to reset a message buffer from an
* interrupt service routine (ISR).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferReset() to be available.
*
* @param xMessageBuffer The handle of the message buffer being reset.
*
* @return If the message buffer was reset then pdPASS is returned. If the
* message buffer could not be reset because either there was a task blocked on
* the message queue to wait for space to become available, or to wait for a
* a message to be available, then pdFAIL is returned.
*
* \defgroup xMessageBufferReset xMessageBufferReset
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReset( xMessageBuffer ) \
xStreamBufferReset( xMessageBuffer )
/**
* message_buffer.h
* @code{c}
* BaseType_t xMessageBufferResetFromISR( MessageBufferHandle_t xMessageBuffer );
* @endcode
*
* An interrupt safe version of the API function that resets the message buffer.
* Resets a message buffer to its initial empty state, discarding any message it
* contained.
*
* A message buffer can only be reset if there are no tasks blocked on it.
*
* Use xMessageBufferReset() to reset a message buffer from a task.
* Use xMessageBufferResetFromISR() to reset a message buffer from an
* interrupt service routine (ISR).
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferResetFromISR() to be available.
*
* @param xMessageBuffer The handle of the message buffer being reset.
*
* @return If the message buffer was reset then pdPASS is returned. If the
* message buffer could not be reset because either there was a task blocked on
* the message queue to wait for space to become available, or to wait for a
* a message to be available, then pdFAIL is returned.
*
* \defgroup xMessageBufferResetFromISR xMessageBufferResetFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferResetFromISR( xMessageBuffer ) \
xStreamBufferResetFromISR( xMessageBuffer )
/**
* message_buffer.h
* @code{c}
* size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer );
* @endcode
* Returns the number of bytes of free space in the message buffer.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferSpaceAvailable() to be available.
*
* @param xMessageBuffer The handle of the message buffer being queried.
*
* @return The number of bytes that can be written to the message buffer before
* the message buffer would be full. When a message is written to the message
* buffer an additional sizeof( size_t ) bytes are also written to store the
* message's length. sizeof( size_t ) is typically 4 bytes on a 32-bit
* architecture, so if xMessageBufferSpacesAvailable() returns 10, then the size
* of the largest message that can be written to the message buffer is 6 bytes.
*
* \defgroup xMessageBufferSpaceAvailable xMessageBufferSpaceAvailable
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSpaceAvailable( xMessageBuffer ) \
xStreamBufferSpacesAvailable( xMessageBuffer )
#define xMessageBufferSpacesAvailable( xMessageBuffer ) \
xStreamBufferSpacesAvailable( xMessageBuffer ) /* Corrects typo in original macro name. */
/**
* message_buffer.h
* @code{c}
* size_t xMessageBufferNextLengthBytes( MessageBufferHandle_t xMessageBuffer );
* @endcode
* Returns the length (in bytes) of the next message in a message buffer.
* Useful if xMessageBufferReceive() returned 0 because the size of the buffer
* passed into xMessageBufferReceive() was too small to hold the next message.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferNextLengthBytes() to be available.
*
* @param xMessageBuffer The handle of the message buffer being queried.
*
* @return The length (in bytes) of the next message in the message buffer, or 0
* if the message buffer is empty.
*
* \defgroup xMessageBufferNextLengthBytes xMessageBufferNextLengthBytes
* \ingroup MessageBufferManagement
*/
#define xMessageBufferNextLengthBytes( xMessageBuffer ) \
xStreamBufferNextMessageLengthBytes( xMessageBuffer )
/**
* message_buffer.h
*
* @code{c}
* BaseType_t xMessageBufferSendCompletedFromISR( MessageBufferHandle_t xMessageBuffer, BaseType_t *pxHigherPriorityTaskWoken );
* @endcode
*
* For advanced users only.
*
* The sbSEND_COMPLETED() macro is called from within the FreeRTOS APIs when
* data is sent to a message buffer or stream buffer. If there was a task that
* was blocked on the message or stream buffer waiting for data to arrive then
* the sbSEND_COMPLETED() macro sends a notification to the task to remove it
* from the Blocked state. xMessageBufferSendCompletedFromISR() does the same
* thing. It is provided to enable application writers to implement their own
* version of sbSEND_COMPLETED(), and MUST NOT BE USED AT ANY OTHER TIME.
*
* See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
* additional information.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferSendCompletedFromISR() to be available.
*
* @param xMessageBuffer The handle of the stream buffer to which data was
* written.
*
* @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
* initialised to pdFALSE before it is passed into
* xMessageBufferSendCompletedFromISR(). If calling
* xMessageBufferSendCompletedFromISR() removes a task from the Blocked state,
* and the task has a priority above the priority of the currently running task,
* then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
* context switch should be performed before exiting the ISR.
*
* @return If a task was removed from the Blocked state then pdTRUE is returned.
* Otherwise pdFALSE is returned.
*
* \defgroup xMessageBufferSendCompletedFromISR xMessageBufferSendCompletedFromISR
* \ingroup StreamBufferManagement
*/
#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) \
xStreamBufferSendCompletedFromISR( ( xMessageBuffer ), ( pxHigherPriorityTaskWoken ) )
/**
* message_buffer.h
*
* @code{c}
* BaseType_t xMessageBufferReceiveCompletedFromISR( MessageBufferHandle_t xMessageBuffer, BaseType_t *pxHigherPriorityTaskWoken );
* @endcode
*
* For advanced users only.
*
* The sbRECEIVE_COMPLETED() macro is called from within the FreeRTOS APIs when
* data is read out of a message buffer or stream buffer. If there was a task
* that was blocked on the message or stream buffer waiting for data to arrive
* then the sbRECEIVE_COMPLETED() macro sends a notification to the task to
* remove it from the Blocked state. xMessageBufferReceiveCompletedFromISR()
* does the same thing. It is provided to enable application writers to
* implement their own version of sbRECEIVE_COMPLETED(), and MUST NOT BE USED AT
* ANY OTHER TIME.
*
* See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
* additional information.
*
* configUSE_STREAM_BUFFERS must be set to 1 in for FreeRTOSConfig.h for
* xMessageBufferReceiveCompletedFromISR() to be available.
*
* @param xMessageBuffer The handle of the stream buffer from which data was
* read.
*
* @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
* initialised to pdFALSE before it is passed into
* xMessageBufferReceiveCompletedFromISR(). If calling
* xMessageBufferReceiveCompletedFromISR() removes a task from the Blocked state,
* and the task has a priority above the priority of the currently running task,
* then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
* context switch should be performed before exiting the ISR.
*
* @return If a task was removed from the Blocked state then pdTRUE is returned.
* Otherwise pdFALSE is returned.
*
* \defgroup xMessageBufferReceiveCompletedFromISR xMessageBufferReceiveCompletedFromISR
* \ingroup StreamBufferManagement
*/
#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) \
xStreamBufferReceiveCompletedFromISR( ( xMessageBuffer ), ( pxHigherPriorityTaskWoken ) )
/* *INDENT-OFF* */
#if defined( __cplusplus )
} /* extern "C" */
#endif
/* *INDENT-ON* */
#endif /* !defined( FREERTOS_MESSAGE_BUFFER_H ) */

389
freertos/include/mpu_prototypes.h Normal file
View File

@ -0,0 +1,389 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/*
* When the MPU is used the standard (non MPU) API functions are mapped to
* equivalents that start "MPU_", the prototypes for which are defined in this
* header files. This will cause the application code to call the MPU_ version
* which wraps the non-MPU version with privilege promoting then demoting code,
* so the kernel code always runs will full privileges.
*/
#ifndef MPU_PROTOTYPES_H
#define MPU_PROTOTYPES_H
typedef struct xTaskGenericNotifyParams
{
TaskHandle_t xTaskToNotify;
UBaseType_t uxIndexToNotify;
uint32_t ulValue;
eNotifyAction eAction;
uint32_t * pulPreviousNotificationValue;
} xTaskGenericNotifyParams_t;
typedef struct xTaskGenericNotifyWaitParams
{
UBaseType_t uxIndexToWaitOn;
uint32_t ulBitsToClearOnEntry;
uint32_t ulBitsToClearOnExit;
uint32_t * pulNotificationValue;
TickType_t xTicksToWait;
} xTaskGenericNotifyWaitParams_t;
typedef struct xTimerGenericCommandFromTaskParams
{
TimerHandle_t xTimer;
BaseType_t xCommandID;
TickType_t xOptionalValue;
BaseType_t * pxHigherPriorityTaskWoken;
TickType_t xTicksToWait;
} xTimerGenericCommandFromTaskParams_t;
typedef struct xEventGroupWaitBitsParams
{
EventGroupHandle_t xEventGroup;
EventBits_t uxBitsToWaitFor;
BaseType_t xClearOnExit;
BaseType_t xWaitForAllBits;
TickType_t xTicksToWait;
} xEventGroupWaitBitsParams_t;
/* MPU versions of task.h API functions. */
void MPU_vTaskDelay( const TickType_t xTicksToDelay ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskDelayUntil( TickType_t * const pxPreviousWakeTime,
const TickType_t xTimeIncrement ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskAbortDelay( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskPriorityGet( const TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
eTaskState MPU_eTaskGetState( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskGetInfo( TaskHandle_t xTask,
TaskStatus_t * pxTaskStatus,
BaseType_t xGetFreeStackSpace,
eTaskState eState ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSuspend( TaskHandle_t xTaskToSuspend ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskResume( TaskHandle_t xTaskToResume ) FREERTOS_SYSTEM_CALL;
TickType_t MPU_xTaskGetTickCount( void ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskGetNumberOfTasks( void ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskGetStackHighWaterMark( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
configSTACK_DEPTH_TYPE MPU_uxTaskGetStackHighWaterMark2( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSetApplicationTaskTag( TaskHandle_t xTask,
TaskHookFunction_t pxHookFunction ) FREERTOS_SYSTEM_CALL;
TaskHookFunction_t MPU_xTaskGetApplicationTaskTag( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet,
BaseType_t xIndex,
void * pvValue ) FREERTOS_SYSTEM_CALL;
void * MPU_pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery,
BaseType_t xIndex ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTaskGetIdleTaskHandle( void ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray,
const UBaseType_t uxArraySize,
configRUN_TIME_COUNTER_TYPE * const pulTotalRunTime ) FREERTOS_SYSTEM_CALL;
configRUN_TIME_COUNTER_TYPE MPU_ulTaskGetRunTimeCounter( const TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
configRUN_TIME_COUNTER_TYPE MPU_ulTaskGetRunTimePercent( const TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
configRUN_TIME_COUNTER_TYPE MPU_ulTaskGetIdleRunTimeCounter( void ) FREERTOS_SYSTEM_CALL;
configRUN_TIME_COUNTER_TYPE MPU_ulTaskGetIdleRunTimePercent( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotify( TaskHandle_t xTaskToNotify,
UBaseType_t uxIndexToNotify,
uint32_t ulValue,
eNotifyAction eAction,
uint32_t * pulPreviousNotificationValue ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotifyEntry( const xTaskGenericNotifyParams_t * pxParams ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotifyWait( UBaseType_t uxIndexToWaitOn,
uint32_t ulBitsToClearOnEntry,
uint32_t ulBitsToClearOnExit,
uint32_t * pulNotificationValue,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotifyWaitEntry( const xTaskGenericNotifyWaitParams_t * pxParams ) FREERTOS_SYSTEM_CALL;
uint32_t MPU_ulTaskGenericNotifyTake( UBaseType_t uxIndexToWaitOn,
BaseType_t xClearCountOnExit,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotifyStateClear( TaskHandle_t xTask,
UBaseType_t uxIndexToClear ) FREERTOS_SYSTEM_CALL;
uint32_t MPU_ulTaskGenericNotifyValueClear( TaskHandle_t xTask,
UBaseType_t uxIndexToClear,
uint32_t ulBitsToClear ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut,
TickType_t * const pxTicksToWait ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTaskGetCurrentTaskHandle( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGetSchedulerState( void ) FREERTOS_SYSTEM_CALL;
/* Privileged only wrappers for Task APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
BaseType_t MPU_xTaskCreate( TaskFunction_t pxTaskCode,
const char * const pcName,
const configSTACK_DEPTH_TYPE uxStackDepth,
void * const pvParameters,
UBaseType_t uxPriority,
TaskHandle_t * const pxCreatedTask ) PRIVILEGED_FUNCTION;
TaskHandle_t MPU_xTaskCreateStatic( TaskFunction_t pxTaskCode,
const char * const pcName,
const configSTACK_DEPTH_TYPE uxStackDepth,
void * const pvParameters,
UBaseType_t uxPriority,
StackType_t * const puxStackBuffer,
StaticTask_t * const pxTaskBuffer ) PRIVILEGED_FUNCTION;
void MPU_vTaskDelete( TaskHandle_t xTaskToDelete ) PRIVILEGED_FUNCTION;
void MPU_vTaskPrioritySet( TaskHandle_t xTask,
UBaseType_t uxNewPriority ) PRIVILEGED_FUNCTION;
TaskHandle_t MPU_xTaskGetHandle( const char * pcNameToQuery ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTaskCallApplicationTaskHook( TaskHandle_t xTask,
void * pvParameter ) PRIVILEGED_FUNCTION;
char * MPU_pcTaskGetName( TaskHandle_t xTaskToQuery ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition,
TaskHandle_t * pxCreatedTask ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition,
TaskHandle_t * pxCreatedTask ) PRIVILEGED_FUNCTION;
void MPU_vTaskAllocateMPURegions( TaskHandle_t xTaskToModify,
const MemoryRegion_t * const xRegions ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTaskGetStaticBuffers( TaskHandle_t xTask,
StackType_t ** ppuxStackBuffer,
StaticTask_t ** ppxTaskBuffer ) PRIVILEGED_FUNCTION;
UBaseType_t MPU_uxTaskPriorityGetFromISR( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
UBaseType_t MPU_uxTaskBasePriorityGet( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
UBaseType_t MPU_uxTaskBasePriorityGetFromISR( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTaskResumeFromISR( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION;
TaskHookFunction_t MPU_xTaskGetApplicationTaskTagFromISR( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify,
UBaseType_t uxIndexToNotify,
uint32_t ulValue,
eNotifyAction eAction,
uint32_t * pulPreviousNotificationValue,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
void MPU_vTaskGenericNotifyGiveFromISR( TaskHandle_t xTaskToNotify,
UBaseType_t uxIndexToNotify,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/* MPU versions of queue.h API functions. */
BaseType_t MPU_xQueueGenericSend( QueueHandle_t xQueue,
const void * const pvItemToQueue,
TickType_t xTicksToWait,
const BaseType_t xCopyPosition ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueReceive( QueueHandle_t xQueue,
void * const pvBuffer,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueuePeek( QueueHandle_t xQueue,
void * const pvBuffer,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueSemaphoreTake( QueueHandle_t xQueue,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxQueueMessagesWaiting( const QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxQueueSpacesAvailable( const QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xQueueGetMutexHolder( QueueHandle_t xSemaphore ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueTakeMutexRecursive( QueueHandle_t xMutex,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueGiveMutexRecursive( QueueHandle_t pxMutex ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueAddToRegistry( QueueHandle_t xQueue,
const char * pcName ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueUnregisterQueue( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
const char * MPU_pcQueueGetName( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore,
QueueSetHandle_t xQueueSet ) FREERTOS_SYSTEM_CALL;
QueueSetMemberHandle_t MPU_xQueueSelectFromSet( QueueSetHandle_t xQueueSet,
const TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueSetQueueNumber( QueueHandle_t xQueue,
UBaseType_t uxQueueNumber ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxQueueGetQueueNumber( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
uint8_t MPU_ucQueueGetQueueType( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
/* Privileged only wrappers for Queue APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
void MPU_vQueueDelete( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
QueueHandle_t MPU_xQueueCreateMutex( const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
QueueHandle_t MPU_xQueueCreateMutexStatic( const uint8_t ucQueueType,
StaticQueue_t * pxStaticQueue ) PRIVILEGED_FUNCTION;
QueueHandle_t MPU_xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount,
const UBaseType_t uxInitialCount ) PRIVILEGED_FUNCTION;
QueueHandle_t MPU_xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount,
const UBaseType_t uxInitialCount,
StaticQueue_t * pxStaticQueue ) PRIVILEGED_FUNCTION;
QueueHandle_t MPU_xQueueGenericCreate( const UBaseType_t uxQueueLength,
const UBaseType_t uxItemSize,
const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
QueueHandle_t MPU_xQueueGenericCreateStatic( const UBaseType_t uxQueueLength,
const UBaseType_t uxItemSize,
uint8_t * pucQueueStorage,
StaticQueue_t * pxStaticQueue,
const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
QueueSetHandle_t MPU_xQueueCreateSet( const UBaseType_t uxEventQueueLength ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore,
QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueGenericReset( QueueHandle_t xQueue,
BaseType_t xNewQueue ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueGenericGetStaticBuffers( QueueHandle_t xQueue,
uint8_t ** ppucQueueStorage,
StaticQueue_t ** ppxStaticQueue ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueGenericSendFromISR( QueueHandle_t xQueue,
const void * const pvItemToQueue,
BaseType_t * const pxHigherPriorityTaskWoken,
const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueGiveFromISR( QueueHandle_t xQueue,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueuePeekFromISR( QueueHandle_t xQueue,
void * const pvBuffer ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueReceiveFromISR( QueueHandle_t xQueue,
void * const pvBuffer,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xQueueIsQueueFullFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
UBaseType_t MPU_uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
TaskHandle_t MPU_xQueueGetMutexHolderFromISR( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION;
QueueSetMemberHandle_t MPU_xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
/* MPU versions of timers.h API functions. */
void * MPU_pvTimerGetTimerID( const TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
void MPU_vTimerSetTimerID( TimerHandle_t xTimer,
void * pvNewID ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerIsTimerActive( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTimerGetTimerDaemonTaskHandle( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerGenericCommandFromTask( TimerHandle_t xTimer,
const BaseType_t xCommandID,
const TickType_t xOptionalValue,
BaseType_t * const pxHigherPriorityTaskWoken,
const TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerGenericCommandFromTaskEntry( const xTimerGenericCommandFromTaskParams_t * pxParams ) FREERTOS_SYSTEM_CALL;
const char * MPU_pcTimerGetName( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
void MPU_vTimerSetReloadMode( TimerHandle_t xTimer,
const BaseType_t uxAutoReload ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerGetReloadMode( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTimerGetReloadMode( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
TickType_t MPU_xTimerGetPeriod( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
TickType_t MPU_xTimerGetExpiryTime( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
/* Privileged only wrappers for Timer APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
TimerHandle_t MPU_xTimerCreate( const char * const pcTimerName,
const TickType_t xTimerPeriodInTicks,
const UBaseType_t uxAutoReload,
void * const pvTimerID,
TimerCallbackFunction_t pxCallbackFunction ) PRIVILEGED_FUNCTION;
TimerHandle_t MPU_xTimerCreateStatic( const char * const pcTimerName,
const TickType_t xTimerPeriodInTicks,
const UBaseType_t uxAutoReload,
void * const pvTimerID,
TimerCallbackFunction_t pxCallbackFunction,
StaticTimer_t * pxTimerBuffer ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTimerGetStaticBuffer( TimerHandle_t xTimer,
StaticTimer_t ** ppxTimerBuffer ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xTimerGenericCommandFromISR( TimerHandle_t xTimer,
const BaseType_t xCommandID,
const TickType_t xOptionalValue,
BaseType_t * const pxHigherPriorityTaskWoken,
const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/* MPU versions of event_group.h API functions. */
EventBits_t MPU_xEventGroupWaitBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToWaitFor,
const BaseType_t xClearOnExit,
const BaseType_t xWaitForAllBits,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupWaitBitsEntry( const xEventGroupWaitBitsParams_t * pxParams ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupClearBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupSetBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupSync( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
const EventBits_t uxBitsToWaitFor,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
#if ( configUSE_TRACE_FACILITY == 1 )
UBaseType_t MPU_uxEventGroupGetNumber( void * xEventGroup ) FREERTOS_SYSTEM_CALL;
void MPU_vEventGroupSetNumber( void * xEventGroup,
UBaseType_t uxEventGroupNumber ) FREERTOS_SYSTEM_CALL;
#endif /* ( configUSE_TRACE_FACILITY == 1 )*/
/* Privileged only wrappers for Event Group APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
EventGroupHandle_t MPU_xEventGroupCreate( void ) PRIVILEGED_FUNCTION;
EventGroupHandle_t MPU_xEventGroupCreateStatic( StaticEventGroup_t * pxEventGroupBuffer ) PRIVILEGED_FUNCTION;
void MPU_vEventGroupDelete( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xEventGroupGetStaticBuffer( EventGroupHandle_t xEventGroup,
StaticEventGroup_t ** ppxEventGroupBuffer ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
EventBits_t MPU_xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
/* MPU versions of message/stream_buffer.h API functions. */
size_t MPU_xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer,
size_t xTriggerLevel ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
/* Privileged only wrappers for Stream Buffer APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
StreamBufferHandle_t MPU_xStreamBufferGenericCreate( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xStreamBufferType,
StreamBufferCallbackFunction_t pxSendCompletedCallback,
StreamBufferCallbackFunction_t pxReceiveCompletedCallback ) PRIVILEGED_FUNCTION;
StreamBufferHandle_t MPU_xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xStreamBufferType,
uint8_t * const pucStreamBufferStorageArea,
StaticStreamBuffer_t * const pxStaticStreamBuffer,
StreamBufferCallbackFunction_t pxSendCompletedCallback,
StreamBufferCallbackFunction_t pxReceiveCompletedCallback ) PRIVILEGED_FUNCTION;
void MPU_vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xStreamBufferGetStaticBuffers( StreamBufferHandle_t xStreamBuffers,
uint8_t * ppucStreamBufferStorageArea,
StaticStreamBuffer_t * ppxStaticStreamBuffer ) PRIVILEGED_FUNCTION;
size_t MPU_xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
size_t MPU_xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t MPU_xStreamBufferResetFromISR( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#endif /* MPU_PROTOTYPES_H */

105
freertos/include/mpu_syscall_numbers.h Normal file
View File

@ -0,0 +1,105 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef MPU_SYSCALL_NUMBERS_H
#define MPU_SYSCALL_NUMBERS_H
/* Numbers assigned to various system calls. */
#define SYSTEM_CALL_xTaskGenericNotify 0
#define SYSTEM_CALL_xTaskGenericNotifyWait 1
#define SYSTEM_CALL_xTimerGenericCommandFromTask 2
#define SYSTEM_CALL_xEventGroupWaitBits 3
#define SYSTEM_CALL_xTaskDelayUntil 4
#define SYSTEM_CALL_xTaskAbortDelay 5
#define SYSTEM_CALL_vTaskDelay 6
#define SYSTEM_CALL_uxTaskPriorityGet 7
#define SYSTEM_CALL_eTaskGetState 8
#define SYSTEM_CALL_vTaskGetInfo 9
#define SYSTEM_CALL_xTaskGetIdleTaskHandle 10
#define SYSTEM_CALL_vTaskSuspend 11
#define SYSTEM_CALL_vTaskResume 12
#define SYSTEM_CALL_xTaskGetTickCount 13
#define SYSTEM_CALL_uxTaskGetNumberOfTasks 14
#define SYSTEM_CALL_ulTaskGetRunTimeCounter 15
#define SYSTEM_CALL_ulTaskGetRunTimePercent 16
#define SYSTEM_CALL_ulTaskGetIdleRunTimePercent 17
#define SYSTEM_CALL_ulTaskGetIdleRunTimeCounter 18
#define SYSTEM_CALL_vTaskSetApplicationTaskTag 19
#define SYSTEM_CALL_xTaskGetApplicationTaskTag 20
#define SYSTEM_CALL_vTaskSetThreadLocalStoragePointer 21
#define SYSTEM_CALL_pvTaskGetThreadLocalStoragePointer 22
#define SYSTEM_CALL_uxTaskGetSystemState 23
#define SYSTEM_CALL_uxTaskGetStackHighWaterMark 24
#define SYSTEM_CALL_uxTaskGetStackHighWaterMark2 25
#define SYSTEM_CALL_xTaskGetCurrentTaskHandle 26
#define SYSTEM_CALL_xTaskGetSchedulerState 27
#define SYSTEM_CALL_vTaskSetTimeOutState 28
#define SYSTEM_CALL_xTaskCheckForTimeOut 29
#define SYSTEM_CALL_ulTaskGenericNotifyTake 30
#define SYSTEM_CALL_xTaskGenericNotifyStateClear 31
#define SYSTEM_CALL_ulTaskGenericNotifyValueClear 32
#define SYSTEM_CALL_xQueueGenericSend 33
#define SYSTEM_CALL_uxQueueMessagesWaiting 34
#define SYSTEM_CALL_uxQueueSpacesAvailable 35
#define SYSTEM_CALL_xQueueReceive 36
#define SYSTEM_CALL_xQueuePeek 37
#define SYSTEM_CALL_xQueueSemaphoreTake 38
#define SYSTEM_CALL_xQueueGetMutexHolder 39
#define SYSTEM_CALL_xQueueTakeMutexRecursive 40
#define SYSTEM_CALL_xQueueGiveMutexRecursive 41
#define SYSTEM_CALL_xQueueSelectFromSet 42
#define SYSTEM_CALL_xQueueAddToSet 43
#define SYSTEM_CALL_vQueueAddToRegistry 44
#define SYSTEM_CALL_vQueueUnregisterQueue 45
#define SYSTEM_CALL_pcQueueGetName 46
#define SYSTEM_CALL_pvTimerGetTimerID 47
#define SYSTEM_CALL_vTimerSetTimerID 48
#define SYSTEM_CALL_xTimerIsTimerActive 49
#define SYSTEM_CALL_xTimerGetTimerDaemonTaskHandle 50
#define SYSTEM_CALL_pcTimerGetName 51
#define SYSTEM_CALL_vTimerSetReloadMode 52
#define SYSTEM_CALL_xTimerGetReloadMode 53
#define SYSTEM_CALL_uxTimerGetReloadMode 54
#define SYSTEM_CALL_xTimerGetPeriod 55
#define SYSTEM_CALL_xTimerGetExpiryTime 56
#define SYSTEM_CALL_xEventGroupClearBits 57
#define SYSTEM_CALL_xEventGroupSetBits 58
#define SYSTEM_CALL_xEventGroupSync 59
#define SYSTEM_CALL_uxEventGroupGetNumber 60
#define SYSTEM_CALL_vEventGroupSetNumber 61
#define SYSTEM_CALL_xStreamBufferSend 62
#define SYSTEM_CALL_xStreamBufferReceive 63
#define SYSTEM_CALL_xStreamBufferIsFull 64
#define SYSTEM_CALL_xStreamBufferIsEmpty 65
#define SYSTEM_CALL_xStreamBufferSpacesAvailable 66
#define SYSTEM_CALL_xStreamBufferBytesAvailable 67
#define SYSTEM_CALL_xStreamBufferSetTriggerLevel 68
#define SYSTEM_CALL_xStreamBufferNextMessageLengthBytes 69
#define NUM_SYSTEM_CALLS 70 /* Total number of system calls. */
#endif /* MPU_SYSCALL_NUMBERS_H */

276
freertos/include/mpu_wrappers.h Normal file
View File

@ -0,0 +1,276 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef MPU_WRAPPERS_H
#define MPU_WRAPPERS_H
/* This file redefines API functions to be called through a wrapper macro, but
* only for ports that are using the MPU. */
#if ( portUSING_MPU_WRAPPERS == 1 )
/* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is
* included from queue.c or task.c to prevent it from having an effect within
* those files. */
#ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/*
* Map standard (non MPU) API functions to equivalents that start
* "MPU_". This will cause the application code to call the MPU_
* version, which wraps the non-MPU version with privilege promoting
* then demoting code, so the kernel code always runs will full
* privileges.
*/
/* Map standard task.h API functions to the MPU equivalents. */
#define vTaskDelay MPU_vTaskDelay
#define xTaskDelayUntil MPU_xTaskDelayUntil
#define xTaskAbortDelay MPU_xTaskAbortDelay
#define uxTaskPriorityGet MPU_uxTaskPriorityGet
#define eTaskGetState MPU_eTaskGetState
#define vTaskGetInfo MPU_vTaskGetInfo
#define vTaskSuspend MPU_vTaskSuspend
#define vTaskResume MPU_vTaskResume
#define xTaskGetTickCount MPU_xTaskGetTickCount
#define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks
#define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark
#define uxTaskGetStackHighWaterMark2 MPU_uxTaskGetStackHighWaterMark2
#define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag
#define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag
#define vTaskSetThreadLocalStoragePointer MPU_vTaskSetThreadLocalStoragePointer
#define pvTaskGetThreadLocalStoragePointer MPU_pvTaskGetThreadLocalStoragePointer
#define xTaskGetIdleTaskHandle MPU_xTaskGetIdleTaskHandle
#define uxTaskGetSystemState MPU_uxTaskGetSystemState
#define ulTaskGetIdleRunTimeCounter MPU_ulTaskGetIdleRunTimeCounter
#define ulTaskGetIdleRunTimePercent MPU_ulTaskGetIdleRunTimePercent
#define xTaskGenericNotify MPU_xTaskGenericNotify
#define xTaskGenericNotifyWait MPU_xTaskGenericNotifyWait
#define ulTaskGenericNotifyTake MPU_ulTaskGenericNotifyTake
#define xTaskGenericNotifyStateClear MPU_xTaskGenericNotifyStateClear
#define ulTaskGenericNotifyValueClear MPU_ulTaskGenericNotifyValueClear
#define vTaskSetTimeOutState MPU_vTaskSetTimeOutState
#define xTaskCheckForTimeOut MPU_xTaskCheckForTimeOut
#define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle
#define xTaskGetSchedulerState MPU_xTaskGetSchedulerState
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#define ulTaskGetRunTimeCounter MPU_ulTaskGetRunTimeCounter
#define ulTaskGetRunTimePercent MPU_ulTaskGetRunTimePercent
#endif /* #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/* Privileged only wrappers for Task APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
#define xTaskCreate MPU_xTaskCreate
#define xTaskCreateStatic MPU_xTaskCreateStatic
#define vTaskDelete MPU_vTaskDelete
#define vTaskPrioritySet MPU_vTaskPrioritySet
#define xTaskGetHandle MPU_xTaskGetHandle
#define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#define pcTaskGetName MPU_pcTaskGetName
#define xTaskCreateRestricted MPU_xTaskCreateRestricted
#define xTaskCreateRestrictedStatic MPU_xTaskCreateRestrictedStatic
#define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions
#define xTaskGetStaticBuffers MPU_xTaskGetStaticBuffers
#define uxTaskPriorityGetFromISR MPU_uxTaskPriorityGetFromISR
#define uxTaskBasePriorityGet MPU_uxTaskBasePriorityGet
#define uxTaskBasePriorityGetFromISR MPU_uxTaskBasePriorityGetFromISR
#define xTaskResumeFromISR MPU_xTaskResumeFromISR
#define xTaskGetApplicationTaskTagFromISR MPU_xTaskGetApplicationTaskTagFromISR
#define xTaskGenericNotifyFromISR MPU_xTaskGenericNotifyFromISR
#define vTaskGenericNotifyGiveFromISR MPU_vTaskGenericNotifyGiveFromISR
#endif /* #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/* Map standard queue.h API functions to the MPU equivalents. */
#define xQueueGenericSend MPU_xQueueGenericSend
#define xQueueReceive MPU_xQueueReceive
#define xQueuePeek MPU_xQueuePeek
#define xQueueSemaphoreTake MPU_xQueueSemaphoreTake
#define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting
#define uxQueueSpacesAvailable MPU_uxQueueSpacesAvailable
#define xQueueGetMutexHolder MPU_xQueueGetMutexHolder
#define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive
#define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive
#define xQueueAddToSet MPU_xQueueAddToSet
#define xQueueSelectFromSet MPU_xQueueSelectFromSet
#if ( configQUEUE_REGISTRY_SIZE > 0 )
#define vQueueAddToRegistry MPU_vQueueAddToRegistry
#define vQueueUnregisterQueue MPU_vQueueUnregisterQueue
#define pcQueueGetName MPU_pcQueueGetName
#endif /* #if ( configQUEUE_REGISTRY_SIZE > 0 ) */
/* Privileged only wrappers for Queue APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
#define vQueueDelete MPU_vQueueDelete
#define xQueueCreateMutex MPU_xQueueCreateMutex
#define xQueueCreateMutexStatic MPU_xQueueCreateMutexStatic
#define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore
#define xQueueCreateCountingSemaphoreStatic MPU_xQueueCreateCountingSemaphoreStatic
#define xQueueGenericCreate MPU_xQueueGenericCreate
#define xQueueGenericCreateStatic MPU_xQueueGenericCreateStatic
#define xQueueGenericReset MPU_xQueueGenericReset
#define xQueueCreateSet MPU_xQueueCreateSet
#define xQueueRemoveFromSet MPU_xQueueRemoveFromSet
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#define xQueueGenericGetStaticBuffers MPU_xQueueGenericGetStaticBuffers
#define xQueueGenericSendFromISR MPU_xQueueGenericSendFromISR
#define xQueueGiveFromISR MPU_xQueueGiveFromISR
#define xQueuePeekFromISR MPU_xQueuePeekFromISR
#define xQueueReceiveFromISR MPU_xQueueReceiveFromISR
#define xQueueIsQueueEmptyFromISR MPU_xQueueIsQueueEmptyFromISR
#define xQueueIsQueueFullFromISR MPU_xQueueIsQueueFullFromISR
#define uxQueueMessagesWaitingFromISR MPU_uxQueueMessagesWaitingFromISR
#define xQueueGetMutexHolderFromISR MPU_xQueueGetMutexHolderFromISR
#define xQueueSelectFromSetFromISR MPU_xQueueSelectFromSetFromISR
#endif /* if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/* Map standard timer.h API functions to the MPU equivalents. */
#define pvTimerGetTimerID MPU_pvTimerGetTimerID
#define vTimerSetTimerID MPU_vTimerSetTimerID
#define xTimerIsTimerActive MPU_xTimerIsTimerActive
#define xTimerGetTimerDaemonTaskHandle MPU_xTimerGetTimerDaemonTaskHandle
#define xTimerGenericCommandFromTask MPU_xTimerGenericCommandFromTask
#define pcTimerGetName MPU_pcTimerGetName
#define vTimerSetReloadMode MPU_vTimerSetReloadMode
#define uxTimerGetReloadMode MPU_uxTimerGetReloadMode
#define xTimerGetPeriod MPU_xTimerGetPeriod
#define xTimerGetExpiryTime MPU_xTimerGetExpiryTime
/* Privileged only wrappers for Timer APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#define xTimerGetReloadMode MPU_xTimerGetReloadMode
#define xTimerCreate MPU_xTimerCreate
#define xTimerCreateStatic MPU_xTimerCreateStatic
#define xTimerGetStaticBuffer MPU_xTimerGetStaticBuffer
#define xTimerGenericCommandFromISR MPU_xTimerGenericCommandFromISR
#endif /* #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/* Map standard event_group.h API functions to the MPU equivalents. */
#define xEventGroupWaitBits MPU_xEventGroupWaitBits
#define xEventGroupClearBits MPU_xEventGroupClearBits
#define xEventGroupSetBits MPU_xEventGroupSetBits
#define xEventGroupSync MPU_xEventGroupSync
#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
#define uxEventGroupGetNumber MPU_uxEventGroupGetNumber
#define vEventGroupSetNumber MPU_vEventGroupSetNumber
#endif /* #if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) ) */
/* Privileged only wrappers for Event Group APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
#define xEventGroupCreate MPU_xEventGroupCreate
#define xEventGroupCreateStatic MPU_xEventGroupCreateStatic
#define vEventGroupDelete MPU_vEventGroupDelete
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#define xEventGroupGetStaticBuffer MPU_xEventGroupGetStaticBuffer
#define xEventGroupClearBitsFromISR MPU_xEventGroupClearBitsFromISR
#define xEventGroupSetBitsFromISR MPU_xEventGroupSetBitsFromISR
#define xEventGroupGetBitsFromISR MPU_xEventGroupGetBitsFromISR
#endif /* #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/* Map standard message/stream_buffer.h API functions to the MPU
* equivalents. */
#define xStreamBufferSend MPU_xStreamBufferSend
#define xStreamBufferReceive MPU_xStreamBufferReceive
#define xStreamBufferIsFull MPU_xStreamBufferIsFull
#define xStreamBufferIsEmpty MPU_xStreamBufferIsEmpty
#define xStreamBufferSpacesAvailable MPU_xStreamBufferSpacesAvailable
#define xStreamBufferBytesAvailable MPU_xStreamBufferBytesAvailable
#define xStreamBufferSetTriggerLevel MPU_xStreamBufferSetTriggerLevel
#define xStreamBufferNextMessageLengthBytes MPU_xStreamBufferNextMessageLengthBytes
/* Privileged only wrappers for Stream Buffer APIs. These are needed so that
* the application can use opaque handles maintained in mpu_wrappers.c
* with all the APIs. */
#define xStreamBufferGenericCreate MPU_xStreamBufferGenericCreate
#define xStreamBufferGenericCreateStatic MPU_xStreamBufferGenericCreateStatic
#define vStreamBufferDelete MPU_vStreamBufferDelete
#define xStreamBufferReset MPU_xStreamBufferReset
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#define xStreamBufferGetStaticBuffers MPU_xStreamBufferGetStaticBuffers
#define xStreamBufferSendFromISR MPU_xStreamBufferSendFromISR
#define xStreamBufferReceiveFromISR MPU_xStreamBufferReceiveFromISR
#define xStreamBufferSendCompletedFromISR MPU_xStreamBufferSendCompletedFromISR
#define xStreamBufferReceiveCompletedFromISR MPU_xStreamBufferReceiveCompletedFromISR
#define xStreamBufferResetFromISR MPU_xStreamBufferResetFromISR
#endif /* #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
#if ( ( configUSE_MPU_WRAPPERS_V1 == 0 ) && ( configENABLE_ACCESS_CONTROL_LIST == 1 ) )
#define vGrantAccessToTask( xTask, xTaskToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xTaskToGrantAccess ) )
#define vRevokeAccessToTask( xTask, xTaskToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xTaskToRevokeAccess ) )
#define vGrantAccessToSemaphore( xTask, xSemaphoreToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xSemaphoreToGrantAccess ) )
#define vRevokeAccessToSemaphore( xTask, xSemaphoreToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xSemaphoreToRevokeAccess ) )
#define vGrantAccessToQueue( xTask, xQueueToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xQueueToGrantAccess ) )
#define vRevokeAccessToQueue( xTask, xQueueToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xQueueToRevokeAccess ) )
#define vGrantAccessToQueueSet( xTask, xQueueSetToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xQueueSetToGrantAccess ) )
#define vRevokeAccessToQueueSet( xTask, xQueueSetToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xQueueSetToRevokeAccess ) )
#define vGrantAccessToEventGroup( xTask, xEventGroupToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xEventGroupToGrantAccess ) )
#define vRevokeAccessToEventGroup( xTask, xEventGroupToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xEventGroupToRevokeAccess ) )
#define vGrantAccessToStreamBuffer( xTask, xStreamBufferToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xStreamBufferToGrantAccess ) )
#define vRevokeAccessToStreamBuffer( xTask, xStreamBufferToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xStreamBufferToRevokeAccess ) )
#define vGrantAccessToMessageBuffer( xTask, xMessageBufferToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xMessageBufferToGrantAccess ) )
#define vRevokeAccessToMessageBuffer( xTask, xMessageBufferToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xMessageBufferToRevokeAccess ) )
#define vGrantAccessToTimer( xTask, xTimerToGrantAccess ) vGrantAccessToKernelObject( ( xTask ), ( int32_t ) ( xTimerToGrantAccess ) )
#define vRevokeAccessToTimer( xTask, xTimerToRevokeAccess ) vRevokeAccessToKernelObject( ( xTask ), ( int32_t ) ( xTimerToRevokeAccess ) )
#endif /* #if ( ( configUSE_MPU_WRAPPERS_V1 == 0 ) && ( configENABLE_ACCESS_CONTROL_LIST == 1 ) ) */
#endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
#define PRIVILEGED_FUNCTION __attribute__( ( section( "privileged_functions" ) ) )
#define PRIVILEGED_DATA __attribute__( ( section( "privileged_data" ) ) )
#define FREERTOS_SYSTEM_CALL __attribute__( ( section( "freertos_system_calls" ) ) )
#else /* portUSING_MPU_WRAPPERS */
#define PRIVILEGED_FUNCTION
#define PRIVILEGED_DATA
#define FREERTOS_SYSTEM_CALL
#endif /* portUSING_MPU_WRAPPERS */
#endif /* MPU_WRAPPERS_H */

62
freertos/include/newlib-freertos.h Normal file
View File

@ -0,0 +1,62 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef INC_NEWLIB_FREERTOS_H
#define INC_NEWLIB_FREERTOS_H
/* Note Newlib support has been included by popular demand, but is not
* used by the FreeRTOS maintainers themselves. FreeRTOS is not
* responsible for resulting newlib operation. User must be familiar with
* newlib and must provide system-wide implementations of the necessary
* stubs. Be warned that (at the time of writing) the current newlib design
* implements a system-wide malloc() that must be provided with locks.
*
* See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html
* for additional information. */
#include <reent.h>
#define configUSE_C_RUNTIME_TLS_SUPPORT 1
#ifndef configTLS_BLOCK_TYPE
#define configTLS_BLOCK_TYPE struct _reent
#endif
#ifndef configINIT_TLS_BLOCK
#define configINIT_TLS_BLOCK( xTLSBlock, pxTopOfStack ) _REENT_INIT_PTR( &( xTLSBlock ) )
#endif
#ifndef configSET_TLS_BLOCK
#define configSET_TLS_BLOCK( xTLSBlock ) ( _impure_ptr = &( xTLSBlock ) )
#endif
#ifndef configDEINIT_TLS_BLOCK
#define configDEINIT_TLS_BLOCK( xTLSBlock ) _reclaim_reent( &( xTLSBlock ) )
#endif
#endif /* INC_NEWLIB_FREERTOS_H */

91
freertos/include/picolibc-freertos.h Normal file
View File

@ -0,0 +1,91 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef INC_PICOLIBC_FREERTOS_H
#define INC_PICOLIBC_FREERTOS_H
/* Use picolibc TLS support to allocate space for __thread variables,
* initialize them at thread creation and set the TLS context at
* thread switch time.
*
* See the picolibc TLS docs:
* https://github.com/picolibc/picolibc/blob/main/doc/tls.md
* for additional information. */
#include <picotls.h>
#define configUSE_C_RUNTIME_TLS_SUPPORT 1
#define configTLS_BLOCK_TYPE void *
#define picolibcTLS_SIZE ( ( portPOINTER_SIZE_TYPE ) _tls_size() )
#define picolibcSTACK_ALIGNMENT_MASK ( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK )
#if __PICOLIBC_MAJOR__ > 1 || __PICOLIBC_MINOR__ >= 8
/* Picolibc 1.8 and newer have explicit alignment values provided
* by the _tls_align() inline */
#define picolibcTLS_ALIGNMENT_MASK ( ( portPOINTER_SIZE_TYPE ) ( _tls_align() - 1 ) )
#else
/* For older Picolibc versions, use the general port alignment value */
#define picolibcTLS_ALIGNMENT_MASK ( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK )
#endif
/* Allocate thread local storage block off the end of the
* stack. The picolibcTLS_SIZE macro returns the size (in
* bytes) of the total TLS area used by the application.
* Calculate the top of stack address. */
#if ( portSTACK_GROWTH < 0 )
#define configINIT_TLS_BLOCK( xTLSBlock, pxTopOfStack ) \
do { \
xTLSBlock = ( void * ) ( ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) - \
picolibcTLS_SIZE ) & \
~picolibcTLS_ALIGNMENT_MASK ); \
pxTopOfStack = ( StackType_t * ) ( ( ( ( portPOINTER_SIZE_TYPE ) xTLSBlock ) - 1 ) & \
~picolibcSTACK_ALIGNMENT_MASK ); \
_init_tls( xTLSBlock ); \
} while( 0 )
#else /* portSTACK_GROWTH */
#define configINIT_TLS_BLOCK( xTLSBlock, pxTopOfStack ) \
do { \
xTLSBlock = ( void * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack + \
picolibcTLS_ALIGNMENT_MASK ) & ~picolibcTLS_ALIGNMENT_MASK ); \
pxTopOfStack = ( StackType_t * ) ( ( ( ( ( portPOINTER_SIZE_TYPE ) xTLSBlock ) + \
picolibcTLS_SIZE ) + picolibcSTACK_ALIGNMENT_MASK ) & \
~picolibcSTACK_ALIGNMENT_MASK ); \
_init_tls( xTLSBlock ); \
} while( 0 )
#endif /* portSTACK_GROWTH */
#define configSET_TLS_BLOCK( xTLSBlock ) _set_tls( xTLSBlock )
#define configDEINIT_TLS_BLOCK( xTLSBlock )
#endif /* INC_PICOLIBC_FREERTOS_H */

281
freertos/include/portable.h Normal file
View File

@ -0,0 +1,281 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/*-----------------------------------------------------------
* Portable layer API. Each function must be defined for each port.
*----------------------------------------------------------*/
#ifndef PORTABLE_H
#define PORTABLE_H
/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
* pre-processor definition was used to ensure the pre-processor found the correct
* portmacro.h file for the port being used. That scheme was deprecated in favour
* of setting the compiler's include path such that it found the correct
* portmacro.h file - removing the need for the constant and allowing the
* portmacro.h file to be located anywhere in relation to the port being used.
* Purely for reasons of backward compatibility the old method is still valid, but
* to make it clear that new projects should not use it, support for the port
* specific constants has been moved into the deprecated_definitions.h header
* file. */
#include "deprecated_definitions.h"
/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h
* did not result in a portmacro.h header file being included - and it should be
* included here. In this case the path to the correct portmacro.h header file
* must be set in the compiler's include path. */
#ifndef portENTER_CRITICAL
#include "portmacro.h"
#endif
#if portBYTE_ALIGNMENT == 32
#define portBYTE_ALIGNMENT_MASK ( 0x001f )
#elif portBYTE_ALIGNMENT == 16
#define portBYTE_ALIGNMENT_MASK ( 0x000f )
#elif portBYTE_ALIGNMENT == 8
#define portBYTE_ALIGNMENT_MASK ( 0x0007 )
#elif portBYTE_ALIGNMENT == 4
#define portBYTE_ALIGNMENT_MASK ( 0x0003 )
#elif portBYTE_ALIGNMENT == 2
#define portBYTE_ALIGNMENT_MASK ( 0x0001 )
#elif portBYTE_ALIGNMENT == 1
#define portBYTE_ALIGNMENT_MASK ( 0x0000 )
#else /* if portBYTE_ALIGNMENT == 32 */
#error "Invalid portBYTE_ALIGNMENT definition"
#endif /* if portBYTE_ALIGNMENT == 32 */
#ifndef portUSING_MPU_WRAPPERS
#define portUSING_MPU_WRAPPERS 0
#endif
#ifndef portNUM_CONFIGURABLE_REGIONS
#define portNUM_CONFIGURABLE_REGIONS 1
#endif
#ifndef portHAS_STACK_OVERFLOW_CHECKING
#define portHAS_STACK_OVERFLOW_CHECKING 0
#endif
#ifndef portARCH_NAME
#define portARCH_NAME NULL
#endif
#ifndef configSTACK_DEPTH_TYPE
#define configSTACK_DEPTH_TYPE StackType_t
#endif
#ifndef configSTACK_ALLOCATION_FROM_SEPARATE_HEAP
/* Defaults to 0 for backward compatibility. */
#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
#include "mpu_wrappers.h"
/*
* Setup the stack of a new task so it is ready to be placed under the
* scheduler control. The registers have to be placed on the stack in
* the order that the port expects to find them.
*
*/
#if ( portUSING_MPU_WRAPPERS == 1 )
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged,
xMPU_SETTINGS * xMPUSettings ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged,
xMPU_SETTINGS * xMPUSettings ) PRIVILEGED_FUNCTION;
#endif /* if ( portHAS_STACK_OVERFLOW_CHECKING == 1 ) */
#else /* if ( portUSING_MPU_WRAPPERS == 1 ) */
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#endif
#endif /* if ( portUSING_MPU_WRAPPERS == 1 ) */
/* Used by heap_5.c to define the start address and size of each memory region
* that together comprise the total FreeRTOS heap space. */
typedef struct HeapRegion
{
uint8_t * pucStartAddress;
size_t xSizeInBytes;
} HeapRegion_t;
/* Used to pass information about the heap out of vPortGetHeapStats(). */
typedef struct xHeapStats
{
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
} HeapStats_t;
/*
* Used to define multiple heap regions for use by heap_5.c. This function
* must be called before any calls to pvPortMalloc() - not creating a task,
* queue, semaphore, mutex, software timer, event group, etc. will result in
* pvPortMalloc being called.
*
* pxHeapRegions passes in an array of HeapRegion_t structures - each of which
* defines a region of memory that can be used as the heap. The array is
* terminated by a HeapRegions_t structure that has a size of 0. The region
* with the lowest start address must appear first in the array.
*/
void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
/*
* Returns a HeapStats_t structure filled with information about the current
* heap state.
*/
void vPortGetHeapStats( HeapStats_t * pxHeapStats );
/*
* Map to the memory management routines required for the port.
*/
void * pvPortMalloc( size_t xWantedSize ) PRIVILEGED_FUNCTION;
void * pvPortCalloc( size_t xNum,
size_t xSize ) PRIVILEGED_FUNCTION;
void vPortFree( void * pv ) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
#if ( configSTACK_ALLOCATION_FROM_SEPARATE_HEAP == 1 )
void * pvPortMallocStack( size_t xSize ) PRIVILEGED_FUNCTION;
void vPortFreeStack( void * pv ) PRIVILEGED_FUNCTION;
#else
#define pvPortMallocStack pvPortMalloc
#define vPortFreeStack vPortFree
#endif
/*
* This function resets the internal state of the heap module. It must be called
* by the application before restarting the scheduler.
*/
void vPortHeapResetState( void ) PRIVILEGED_FUNCTION;
#if ( configUSE_MALLOC_FAILED_HOOK == 1 )
/**
* task.h
* @code{c}
* void vApplicationMallocFailedHook( void )
* @endcode
*
* This hook function is called when allocation failed.
*/
void vApplicationMallocFailedHook( void );
#endif
/*
* Setup the hardware ready for the scheduler to take control. This generally
* sets up a tick interrupt and sets timers for the correct tick frequency.
*/
BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
/*
* Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
* the hardware is left in its original condition after the scheduler stops
* executing.
*/
void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
/*
* The structures and methods of manipulating the MPU are contained within the
* port layer.
*
* Fills the xMPUSettings structure with the memory region information
* contained in xRegions.
*/
#if ( portUSING_MPU_WRAPPERS == 1 )
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
const struct xMEMORY_REGION * const xRegions,
StackType_t * pxBottomOfStack,
configSTACK_DEPTH_TYPE uxStackDepth ) PRIVILEGED_FUNCTION;
#endif
/**
* @brief Checks if the calling task is authorized to access the given buffer.
*
* @param pvBuffer The buffer which the calling task wants to access.
* @param ulBufferLength The length of the pvBuffer.
* @param ulAccessRequested The permissions that the calling task wants.
*
* @return pdTRUE if the calling task is authorized to access the buffer,
* pdFALSE otherwise.
*/
#if ( portUSING_MPU_WRAPPERS == 1 )
BaseType_t xPortIsAuthorizedToAccessBuffer( const void * pvBuffer,
uint32_t ulBufferLength,
uint32_t ulAccessRequested ) PRIVILEGED_FUNCTION;
#endif
/**
* @brief Checks if the calling task is authorized to access the given kernel object.
*
* @param lInternalIndexOfKernelObject The index of the kernel object in the kernel
* object handle pool.
*
* @return pdTRUE if the calling task is authorized to access the kernel object,
* pdFALSE otherwise.
*/
#if ( ( portUSING_MPU_WRAPPERS == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) )
BaseType_t xPortIsAuthorizedToAccessKernelObject( int32_t lInternalIndexOfKernelObject ) PRIVILEGED_FUNCTION;
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* PORTABLE_H */

138
freertos/include/projdefs.h Normal file
View File

@ -0,0 +1,138 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef PROJDEFS_H
#define PROJDEFS_H
/*
* Defines the prototype to which task functions must conform. Defined in this
* file to ensure the type is known before portable.h is included.
*/
typedef void (* TaskFunction_t)( void * arg );
/* Converts a time in milliseconds to a time in ticks. This macro can be
* overridden by a macro of the same name defined in FreeRTOSConfig.h in case the
* definition here is not suitable for your application. */
#ifndef pdMS_TO_TICKS
#define pdMS_TO_TICKS( xTimeInMs ) ( ( TickType_t ) ( ( ( uint64_t ) ( xTimeInMs ) * ( uint64_t ) configTICK_RATE_HZ ) / ( uint64_t ) 1000U ) )
#endif
/* Converts a time in ticks to a time in milliseconds. This macro can be
* overridden by a macro of the same name defined in FreeRTOSConfig.h in case the
* definition here is not suitable for your application. */
#ifndef pdTICKS_TO_MS
#define pdTICKS_TO_MS( xTimeInTicks ) ( ( TickType_t ) ( ( ( uint64_t ) ( xTimeInTicks ) * ( uint64_t ) 1000U ) / ( uint64_t ) configTICK_RATE_HZ ) )
#endif
#define pdFALSE ( ( BaseType_t ) 0 )
#define pdTRUE ( ( BaseType_t ) 1 )
#define pdFALSE_SIGNED ( ( BaseType_t ) 0 )
#define pdTRUE_SIGNED ( ( BaseType_t ) 1 )
#define pdFALSE_UNSIGNED ( ( UBaseType_t ) 0 )
#define pdTRUE_UNSIGNED ( ( UBaseType_t ) 1 )
#define pdPASS ( pdTRUE )
#define pdFAIL ( pdFALSE )
#define errQUEUE_EMPTY ( ( BaseType_t ) 0 )
#define errQUEUE_FULL ( ( BaseType_t ) 0 )
/* FreeRTOS error definitions. */
#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 )
#define errQUEUE_BLOCKED ( -4 )
#define errQUEUE_YIELD ( -5 )
/* Macros used for basic data corruption checks. */
#ifndef configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES
#define configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES 0
#endif
#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
#define pdINTEGRITY_CHECK_VALUE 0x5a5a
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
#define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5aUL
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_64_BITS )
#define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5a5a5a5a5aULL
#else
#error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif
/* The following errno values are used by FreeRTOS+ components, not FreeRTOS
* itself. */
#define pdFREERTOS_ERRNO_NONE 0 /* No errors */
#define pdFREERTOS_ERRNO_ENOENT 2 /* No such file or directory */
#define pdFREERTOS_ERRNO_EINTR 4 /* Interrupted system call */
#define pdFREERTOS_ERRNO_EIO 5 /* I/O error */
#define pdFREERTOS_ERRNO_ENXIO 6 /* No such device or address */
#define pdFREERTOS_ERRNO_EBADF 9 /* Bad file number */
#define pdFREERTOS_ERRNO_EAGAIN 11 /* No more processes */
#define pdFREERTOS_ERRNO_EWOULDBLOCK 11 /* Operation would block */
#define pdFREERTOS_ERRNO_ENOMEM 12 /* Not enough memory */
#define pdFREERTOS_ERRNO_EACCES 13 /* Permission denied */
#define pdFREERTOS_ERRNO_EFAULT 14 /* Bad address */
#define pdFREERTOS_ERRNO_EBUSY 16 /* Mount device busy */
#define pdFREERTOS_ERRNO_EEXIST 17 /* File exists */
#define pdFREERTOS_ERRNO_EXDEV 18 /* Cross-device link */
#define pdFREERTOS_ERRNO_ENODEV 19 /* No such device */
#define pdFREERTOS_ERRNO_ENOTDIR 20 /* Not a directory */
#define pdFREERTOS_ERRNO_EISDIR 21 /* Is a directory */
#define pdFREERTOS_ERRNO_EINVAL 22 /* Invalid argument */
#define pdFREERTOS_ERRNO_ENOSPC 28 /* No space left on device */
#define pdFREERTOS_ERRNO_ESPIPE 29 /* Illegal seek */
#define pdFREERTOS_ERRNO_EROFS 30 /* Read only file system */
#define pdFREERTOS_ERRNO_EUNATCH 42 /* Protocol driver not attached */
#define pdFREERTOS_ERRNO_EBADE 50 /* Invalid exchange */
#define pdFREERTOS_ERRNO_EFTYPE 79 /* Inappropriate file type or format */
#define pdFREERTOS_ERRNO_ENMFILE 89 /* No more files */
#define pdFREERTOS_ERRNO_ENOTEMPTY 90 /* Directory not empty */
#define pdFREERTOS_ERRNO_ENAMETOOLONG 91 /* File or path name too long */
#define pdFREERTOS_ERRNO_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define pdFREERTOS_ERRNO_EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define pdFREERTOS_ERRNO_ENOBUFS 105 /* No buffer space available */
#define pdFREERTOS_ERRNO_ENOPROTOOPT 109 /* Protocol not available */
#define pdFREERTOS_ERRNO_EADDRINUSE 112 /* Address already in use */
#define pdFREERTOS_ERRNO_ETIMEDOUT 116 /* Connection timed out */
#define pdFREERTOS_ERRNO_EINPROGRESS 119 /* Connection already in progress */
#define pdFREERTOS_ERRNO_EALREADY 120 /* Socket already connected */
#define pdFREERTOS_ERRNO_EADDRNOTAVAIL 125 /* Address not available */
#define pdFREERTOS_ERRNO_EISCONN 127 /* Socket is already connected */
#define pdFREERTOS_ERRNO_ENOTCONN 128 /* Socket is not connected */
#define pdFREERTOS_ERRNO_ENOMEDIUM 135 /* No medium inserted */
#define pdFREERTOS_ERRNO_EILSEQ 138 /* An invalid UTF-16 sequence was encountered. */
#define pdFREERTOS_ERRNO_ECANCELED 140 /* Operation canceled. */
/* The following endian values are used by FreeRTOS+ components, not FreeRTOS
* itself. */
#define pdFREERTOS_LITTLE_ENDIAN 0
#define pdFREERTOS_BIG_ENDIAN 1
/* Re-defining endian values for generic naming. */
#define pdLITTLE_ENDIAN pdFREERTOS_LITTLE_ENDIAN
#define pdBIG_ENDIAN pdFREERTOS_BIG_ENDIAN
#endif /* PROJDEFS_H */

1810
freertos/include/queue.h Normal file
View File

File diff suppressed because it is too large Load Diff

1215
freertos/include/semphr.h Normal file
View File

File diff suppressed because it is too large Load Diff

141
freertos/include/stack_macros.h Normal file
View File

@ -0,0 +1,141 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef STACK_MACROS_H
#define STACK_MACROS_H
/*
* Call the stack overflow hook function if the stack of the task being swapped
* out is currently overflowed, or looks like it might have overflowed in the
* past.
*
* Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check
* the current stack state only - comparing the current top of stack value to
* the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1
* will also cause the last few stack bytes to be checked to ensure the value
* to which the bytes were set when the task was created have not been
* overwritten. Note this second test does not guarantee that an overflowed
* stack will always be recognised.
*/
/*-----------------------------------------------------------*/
/*
* portSTACK_LIMIT_PADDING is a number of extra words to consider to be in
* use on the stack.
*/
#ifndef portSTACK_LIMIT_PADDING
#define portSTACK_LIMIT_PADDING 0
#endif
#if ( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
do { \
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack + portSTACK_LIMIT_PADDING ) \
{ \
char * pcOverflowTaskName = pxCurrentTCB->pcTaskName; \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pcOverflowTaskName ); \
} \
} while( 0 )
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if ( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
do { \
\
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack - portSTACK_LIMIT_PADDING ) \
{ \
char * pcOverflowTaskName = pxCurrentTCB->pcTaskName; \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pcOverflowTaskName ); \
} \
} while( 0 )
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
do { \
const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \
const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5U; \
\
if( ( pulStack[ 0 ] != ulCheckValue ) || \
( pulStack[ 1 ] != ulCheckValue ) || \
( pulStack[ 2 ] != ulCheckValue ) || \
( pulStack[ 3 ] != ulCheckValue ) ) \
{ \
char * pcOverflowTaskName = pxCurrentTCB->pcTaskName; \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pcOverflowTaskName ); \
} \
} while( 0 )
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
#if ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
do { \
int8_t * pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \
static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
\
\
pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
\
/* Has the extremity of the task stack ever been written over? */ \
if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
{ \
char * pcOverflowTaskName = pxCurrentTCB->pcTaskName; \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pcOverflowTaskName ); \
} \
} while( 0 )
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
/* Remove stack overflow macro if not being used. */
#ifndef taskCHECK_FOR_STACK_OVERFLOW
#define taskCHECK_FOR_STACK_OVERFLOW()
#endif
#endif /* STACK_MACROS_H */

58
freertos/include/stdint.readme Normal file
View File

@ -0,0 +1,58 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef FREERTOS_STDINT
#define FREERTOS_STDINT
/*******************************************************************************
* THIS IS NOT A FULL stdint.h IMPLEMENTATION - It only contains the definitions
* necessary to build the FreeRTOS code. It is provided to allow FreeRTOS to be
* built using compilers that do not provide their own stdint.h definition.
*
* To use this file:
*
* 1) Copy this file into the directory that contains your FreeRTOSConfig.h
* header file, as that directory will already be in the compiler's include
* path.
*
* 2) Rename the copied file stdint.h.
*
*/
typedef signed char int8_t;
typedef unsigned char uint8_t;
typedef short int16_t;
typedef unsigned short uint16_t;
typedef long int32_t;
typedef unsigned long uint32_t;
#ifndef SIZE_MAX
#define SIZE_MAX ( ( size_t ) -1 )
#endif
#endif /* FREERTOS_STDINT */

1280
freertos/include/stream_buffer.h Normal file
View File

File diff suppressed because it is too large Load Diff

3774
freertos/include/task.h Normal file
View File

File diff suppressed because it is too large Load Diff

1431
freertos/include/timers.h Normal file
View File

File diff suppressed because it is too large Load Diff

246
freertos/list.c Normal file
View File

@ -0,0 +1,246 @@
/*
* FreeRTOS Kernel V11.1.0
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#include <stdlib.h>
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
* all the API functions to use the MPU wrappers. That should only be done when
* task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
#include "FreeRTOS.h"
#include "list.h"
/* The MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be
* defined for the header files above, but not in this file, in order to
* generate the correct privileged Vs unprivileged linkage and placement. */
#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/*-----------------------------------------------------------
* PUBLIC LIST API documented in list.h
*----------------------------------------------------------*/
void vListInitialise( List_t * const pxList )
{
traceENTER_vListInitialise( pxList );
/* The list structure contains a list item which is used to mark the
* end of the list. To initialise the list the list end is inserted
* as the only list entry. */
pxList->pxIndex = ( ListItem_t * ) &( pxList->xListEnd );
listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( &( pxList->xListEnd ) );
/* The list end value is the highest possible value in the list to
* ensure it remains at the end of the list. */
pxList->xListEnd.xItemValue = portMAX_DELAY;
/* The list end next and previous pointers point to itself so we know
* when the list is empty. */
pxList->xListEnd.pxNext = ( ListItem_t * ) &( pxList->xListEnd );
pxList->xListEnd.pxPrevious = ( ListItem_t * ) &( pxList->xListEnd );
/* Initialize the remaining fields of xListEnd when it is a proper ListItem_t */
#if ( configUSE_MINI_LIST_ITEM == 0 )
{
pxList->xListEnd.pvOwner = NULL;
pxList->xListEnd.pxContainer = NULL;
listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( &( pxList->xListEnd ) );
}
#endif
pxList->uxNumberOfItems = ( UBaseType_t ) 0U;
/* Write known values into the list if
* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList );
listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList );
traceRETURN_vListInitialise();
}
/*-----------------------------------------------------------*/
void vListInitialiseItem( ListItem_t * const pxItem )
{
traceENTER_vListInitialiseItem( pxItem );
/* Make sure the list item is not recorded as being on a list. */
pxItem->pxContainer = NULL;
/* Write known values into the list item if
* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
traceRETURN_vListInitialiseItem();
}
/*-----------------------------------------------------------*/
void vListInsertEnd( List_t * const pxList,
ListItem_t * const pxNewListItem )
{
ListItem_t * const pxIndex = pxList->pxIndex;
traceENTER_vListInsertEnd( pxList, pxNewListItem );
/* Only effective when configASSERT() is also defined, these tests may catch
* the list data structures being overwritten in memory. They will not catch
* data errors caused by incorrect configuration or use of FreeRTOS. */
listTEST_LIST_INTEGRITY( pxList );
listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
/* Insert a new list item into pxList, but rather than sort the list,
* makes the new list item the last item to be removed by a call to
* listGET_OWNER_OF_NEXT_ENTRY(). */
pxNewListItem->pxNext = pxIndex;
pxNewListItem->pxPrevious = pxIndex->pxPrevious;
/* Only used during decision coverage testing. */
mtCOVERAGE_TEST_DELAY();
pxIndex->pxPrevious->pxNext = pxNewListItem;
pxIndex->pxPrevious = pxNewListItem;
/* Remember which list the item is in. */
pxNewListItem->pxContainer = pxList;
( pxList->uxNumberOfItems ) = ( UBaseType_t ) ( pxList->uxNumberOfItems + 1U );
traceRETURN_vListInsertEnd();
}
/*-----------------------------------------------------------*/
void vListInsert( List_t * const pxList,
ListItem_t * const pxNewListItem )
{
ListItem_t * pxIterator;
const TickType_t xValueOfInsertion = pxNewListItem->xItemValue;
traceENTER_vListInsert( pxList, pxNewListItem );
/* Only effective when configASSERT() is also defined, these tests may catch
* the list data structures being overwritten in memory. They will not catch
* data errors caused by incorrect configuration or use of FreeRTOS. */
listTEST_LIST_INTEGRITY( pxList );
listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
/* Insert the new list item into the list, sorted in xItemValue order.
*
* If the list already contains a list item with the same item value then the
* new list item should be placed after it. This ensures that TCBs which are
* stored in ready lists (all of which have the same xItemValue value) get a
* share of the CPU. However, if the xItemValue is the same as the back marker
* the iteration loop below will not end. Therefore the value is checked
* first, and the algorithm slightly modified if necessary. */
if( xValueOfInsertion == portMAX_DELAY )
{
pxIterator = pxList->xListEnd.pxPrevious;
}
else
{
/* *** NOTE ***********************************************************
* If you find your application is crashing here then likely causes are
* listed below. In addition see https://www.FreeRTOS.org/FAQHelp.html for
* more tips, and ensure configASSERT() is defined!
* https://www.FreeRTOS.org/a00110.html#configASSERT
*
* 1) Stack overflow -
* see https://www.FreeRTOS.org/Stacks-and-stack-overflow-checking.html
* 2) Incorrect interrupt priority assignment, especially on Cortex-M
* parts where numerically high priority values denote low actual
* interrupt priorities, which can seem counter intuitive. See
* https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html and the definition
* of configMAX_SYSCALL_INTERRUPT_PRIORITY on
* https://www.FreeRTOS.org/a00110.html
* 3) Calling an API function from within a critical section or when
* the scheduler is suspended, or calling an API function that does
* not end in "FromISR" from an interrupt.
* 4) Using a queue or semaphore before it has been initialised or
* before the scheduler has been started (are interrupts firing
* before vTaskStartScheduler() has been called?).
* 5) If the FreeRTOS port supports interrupt nesting then ensure that
* the priority of the tick interrupt is at or below
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
**********************************************************************/
for( pxIterator = ( ListItem_t * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext )
{
/* There is nothing to do here, just iterating to the wanted
* insertion position. */
}
}
pxNewListItem->pxNext = pxIterator->pxNext;
pxNewListItem->pxNext->pxPrevious = pxNewListItem;
pxNewListItem->pxPrevious = pxIterator;
pxIterator->pxNext = pxNewListItem;
/* Remember which list the item is in. This allows fast removal of the
* item later. */
pxNewListItem->pxContainer = pxList;
( pxList->uxNumberOfItems ) = ( UBaseType_t ) ( pxList->uxNumberOfItems + 1U );
traceRETURN_vListInsert();
}
/*-----------------------------------------------------------*/
UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove )
{
/* The list item knows which list it is in. Obtain the list from the list
* item. */
List_t * const pxList = pxItemToRemove->pxContainer;
traceENTER_uxListRemove( pxItemToRemove );
pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
/* Only used during decision coverage testing. */
mtCOVERAGE_TEST_DELAY();
/* Make sure the index is left pointing to a valid item. */
if( pxList->pxIndex == pxItemToRemove )
{
pxList->pxIndex = pxItemToRemove->pxPrevious;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
pxItemToRemove->pxContainer = NULL;
( pxList->uxNumberOfItems ) = ( UBaseType_t ) ( pxList->uxNumberOfItems - 1U );
traceRETURN_uxListRemove( pxList->uxNumberOfItems );
return pxList->uxNumberOfItems;
}
/*-----------------------------------------------------------*/

4
freertos/manifest.yml Normal file
View File

@ -0,0 +1,4 @@
name : "FreeRTOS-Kernel"
version: "v11.1.0"
description: "FreeRTOS Kernel."
license: "MIT"

1110
freertos/portable/CMakeLists.txt Normal file
View File

File diff suppressed because it is too large Load Diff

1
freertos/portable/Keil/See-also-the-RVDS-directory.txt Normal file
View File

@ -0,0 +1 @@
Nothing to see here.

19
freertos/portable/readme.txt Normal file
View File

@ -0,0 +1,19 @@
Each real time kernel port consists of three files that contain the core kernel
components and are common to every port, and one or more files that are
specific to a particular microcontroller and/or compiler.
+ The FreeRTOS/Source/Portable/MemMang directory contains the five sample
memory allocators as described on the https://www.FreeRTOS.org WEB site.
+ The other directories each contain files specific to a particular
microcontroller or compiler, where the directory name denotes the compiler
specific files the directory contains.
For example, if you are interested in the [compiler] port for the [architecture]
microcontroller, then the port specific files are contained in
FreeRTOS/Source/Portable/[compiler]/[architecture] directory. If this is the
only port you are interested in then all the other directories can be
ignored.

3364
freertos/queue.c Normal file
View File

File diff suppressed because it is too large Load Diff

1816
freertos/sbom.spdx Normal file
View File

File diff suppressed because it is too large Load Diff

1718
freertos/stream_buffer.c Normal file
View File

File diff suppressed because it is too large Load Diff

8696
freertos/tasks.c Normal file
View File

File diff suppressed because it is too large Load Diff

1340
freertos/timers.c Normal file
View File

File diff suppressed because it is too large Load Diff

4
lib/inc/malloc.h
View File

@ -15,12 +15,12 @@
// mem1内存参数设定.mem1完全处于内部SRAM里面.(设置内部SARM的内存池和内存表的参数)
#define MEM1_BLOCK_SIZE 8 // 一个内存块大小为32字节
#define MEM1_MAX_SIZE 25 * 1024 // 最大管理内存 1K (我们这个内存管理系统的内部SRAM可控制的内存大小)
#define MEM1_MAX_SIZE 8 * 1024 // 最大管理内存 1K (我们这个内存管理系统的内部SRAM可控制的内存大小)
#define MEM1_ALLOC_TABLE_SIZE MEM1_MAX_SIZE / MEM1_BLOCK_SIZE // 内存表大小(有多少块内存块)
// mem2内存参数设定.mem2的内存池处于外部SRAM里面
#define MEM2_BLOCK_SIZE 8 // 一个内存块大小为32字节
#define MEM2_MAX_SIZE 20 * 1024 // 因为精英版没有外扩内存,故这里设置一个最小值
#define MEM2_MAX_SIZE 0 * 1024 // 因为精英版没有外扩内存,故这里设置一个最小值
#define MEM2_ALLOC_TABLE_SIZE MEM2_MAX_SIZE / MEM2_BLOCK_SIZE // 内存表大小
// 内存管理控制器结构体

6
lib/src/debug.c
View File

@ -26,18 +26,18 @@ BOOL DBG_ASSERT(uint8_t cond _DBG_LINE_)
#else
#include "board.h"
#include "sys.h"
#include "leds.h"
BOOL DBG_ASSERT(uint8_t cond _DBG_LINE_)
{
do
{
if ((cond) == FALSE)
{
dbg_assert_line = line;
// dbg_assert_line = line;
#if DEBUG_ENABLE == FALSE
sys_soft_reset();
#endif
leds_on(LEDS_ORANGE);
// leds_on(LEDS_ORANGE);
while (1)
{
LOG_ERR("DBG_ASSERT:%d", line);

6
sys.h
View File

@ -14,9 +14,9 @@
#include "main.h"
#include "lib.h"
#define CLOCK_CHANGE_ENABLE TRUE ///< 时钟切换使能
#define LOCK() __disable_irq() ///< 系统关全局中断
#define UNLOCK() __enable_irq() ///< 系统开全局中断
#define CLOCK_CHANGE_ENABLE FALSE ///< 时钟切换使能
#define LOCK() __disable_irq() ///< 系统关全局中断
#define UNLOCK() __enable_irq() ///< 系统开全局中断
typedef struct
{